Ferroxcube E38-3F4-A1000-E Planar e cores and accessory Datasheet

FERROXCUBE
DATA SHEET
E58/11/38
Planar E cores and accessories
Supersedes data of September 2004
2008 Sep 01
Ferroxcube
Planar E cores and accessories
E58/11/38
CORES
Effective core parameters of a set of E cores
SYMBOL
PARAMETER
VALUE
Σ(I/A)
core factor (C1)
0.268
mm−1
Ve
effective volume
24600
mm3
Ie
effective length
80.6
mm
Ae
effective area
308
mm2
Amin
minimum area
308
mm2
m
mass of core half
≈ 62
g
58.4 ±1.2
handbook, halfpage
UNIT
50 min.
8.1
±0.2
6.5 ±0.13 10.5
±0.13
38.1 ± 0.8
R0.64 ref. typ.
R0.81 ref. typ.
CBW413
Dimensions in mm.
Fig.1 E58/11/38 core half.
Effective core parameters of an E/PLT combination
SYMBOL
PARAMETER
VALUE
UNIT
Σ(I/A)
core factor (C1)
0.224
mm−1
Ve
effective volume
20800
mm3
Ie
effective length
67.7
mm
Ae
effective area
310
mm2
Amin
minimum area
310
mm2
m
mass of core half
≈ 44
g
handbook, halfpage
58.4 ±1.2
4.1 ±0.13
Ordering information for plates
GRADE
38.1 ±0.8
TYPE NUMBER
3C90
PLT58/38/4-3C90
3C92
PLT58/38/4-3C92
3C93
PLT58/38/4-3C93
3C94
PLT58/38/4-3C94
3C95
PLT58/38/4-3C95
3F3
PLT58/38/4-3F3
3F4
PLT58/38/4-3F4
CBW414
R0.64 ref. typ.
Dimensions in mm.
Fig.2 PLT 58/38/4.
2008 Sep 01
2
Ferroxcube
Planar E cores and accessories
E58/11/38
Core halves for use in combination with an E core
AL measured in combination with a non-gapped core half, clamping force for AL measurements, 40 ±20 N, unless stated
otherwise.
GRADE
3C90
AL
(nH)
TOTAL AIR GAP
(µm)
µe
TYPE NUMBER
315 ±3%(1)
≈ 67
≈ 1400
E58/11/38-3C90-E315-E
400
±3%(1)
≈ 85
≈ 1100
E58/11/38-3C90-E400-E
630
±5%(1)
≈ 134
≈ 650
E58/11/38-3C90-E630-E
1000 ±5%
≈ 213
≈ 400
E58/11/38-3C90-A1000-E
1600 ±10%
≈ 341
≈ 200
E58/11/38-3C90-A1600-E
8480 ±25%
≈ 1800
≈0
E58/11/38-3C90
3C92
6600 ±25%
≈ 1410
≈0
E58/11/38-3C92
3C93
7710 ±25%
≈ 1640
≈0
E58/11/38-3C93
3C94
315
±3%(1)
≈ 67
≈ 1400
400
±3%(1)
≈ 85
≈ 1100
E58/11/38-3C94-E400-E
630 ±5%(1)
≈ 134
≈ 650
E58/11/38-3C94-E630-E
≈ 213
≈ 400
E58/11/38-3C94-A1000-E
E58/11/38-3C94-A1600-E
1000 ±5%
3C95
3F3
1600 ±10%
≈ 341
≈ 200
8480 ±25%
≈ 1800
≈0
E58/11/38-3C94
10330 ±25%
E58/11/38-3C95
≈ 2150
≈0
±3%(1)
≈ 67
≈ 1400
E58/11/38-3F3-E315-E
400 ±3%(1)
≈ 85
≈ 1100
E58/11/38-3F3-E400-E
±5%(1)
≈ 134
≈ 650
E58/11/38-3F3-E630-E
≈ 213
≈ 400
E58/11/38-3F3-A1000-E
1600 ±10%
≈ 341
≈ 200
E58/11/38-3F3-A1600-E
7710 ±25%
≈ 1640
≈0
315
630
1000 ±5%
3F4
E58/11/38-3C94-E315-E
E58/11/38-3F3
315
±3%(1)
≈ 67
≈ 1400
400
±3%(1)
≈ 85
≈ 1100
E58/11/38-3F4-E400-E
630 ±5%(1)
≈ 134
≈ 650
E58/11/38-3F4-E630-E
≈ 213
≈ 400
E58/11/38-3F4-A1000-E
1600 ±10%
≈ 341
≈ 200
E58/11/38-3F4-A1600-E
4030 ±25%
≈ 860
≈0
1000 ±5%
E58/11/38-3F4-E315-E
E58/11/38-3F4
Note
1. Measured in combination with an equal gapped E core half, clamping force for AL measurements, 40 ±20 N.
2008 Sep 01
3
Ferroxcube
Planar E cores and accessories
E58/11/38
Core halves for use in combination with a plate (PLT)
AL measured in combination with a plate (PLT), clamping force for AL measurements, 40 ±20 N.
GRADE
3C90
AL
(nH)
AIR GAP
(µm)
µe
TYPE NUMBER
315 ±3%
≈ 56
≈ 1400
E58/11/38-3C90-A315-P
400 ±3%
≈ 71
≈ 1100
E58/11/38-3C90-A400-P
630 ±5%
≈ 112
≈ 650
E58/11/38-3C90-A630-P
1000 ±5%
≈ 178
≈ 400
E58/11/38-3C90-A1000-P
1600 ±10%
≈ 285
≈ 200
E58/11/38-3C90-A1600-P
9970 ±25%
≈ 1780
≈0
E58/11/38-3C90
3C92
7770 ±25%
≈ 1390
≈0
E58/11/38-3C92
3C93
9070 ±25%
≈ 1620
≈0
E58/11/38-3C93
3C94
315 ±3%
≈ 56
≈ 1400
E58/11/38-3C94-A315-P
400 ±3%
≈ 71
≈ 1100
E58/11/38-3C94-A400-P
630 ±5%
≈ 112
≈ 650
E58/11/38-3C94-A630-P
1000 ±5%
≈ 178
≈ 400
E58/11/38-3C94-A1000-P
E58/11/38-3C94-A1600-P
3C95
3F3
3F4
2008 Sep 01
1600 ±10%
≈ 285
≈ 200
9970 ±25%
≈ 1780
≈0
E58/11/38-3C94
12090 ±25%
≈ 2100
≈0
E58/11/38-3C95
≈ 56
≈ 1400
E58/11/38-3F3-A315-P
400 ±3%
≈ 71
≈ 1100
E58/11/38-3F3-A400-P
630 ±5%
≈ 112
≈ 650
E58/11/38-3F3-A630-P
1000 ±5%
≈ 178
≈ 400
E58/11/38-3F3-A1000-P
1600 ±10%
≈ 285
≈ 200
E58/11/38-3F3-A1600-P
9070 ±25%
≈ 1620
≈0
≈ 56
≈ 1400
E58/11/38-3F4-A315-P
400 ±3%
≈ 71
≈ 1100
E58/11/38-3F4-A400-P
630 ±5%
≈ 112
≈ 650
E58/11/38-3F4-A630-P
1000 ±5%
≈ 178
≈ 400
E58/11/38-3F4-A1000-P
1600 ±10%
≈ 285
≈ 200
E58/11/38-3F4-A1600-P
4780 ±25%
≈ 850
≈0
315 ±3%
315 ±3%
4
E58/11/38-3F3
E58/11/38-3F4
Ferroxcube
Planar E cores and accessories
E58/11/38
Properties of core sets under power conditions
B (mT) at
GRADE
H = 250 A/m;
f = 10 kHz;
T = 100 °C
CORE LOSS (W) at
f = 100 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 100 kHz;
ˆ = 200 mT;
B
T = 25 °C
f = 100 kHz;
ˆ = 200 mT;
B
T = 100 °C
f = 400 kHz;
ˆ = 50 mT;
B
T = 100 °C
E+E58-3C90
≥320
≤ 3.0
−
−
−
E+PLT58-3C90
≥320
≤ 2.6
−
−
−
E+E58-3C92
≥370
≤ 2.4
−
≤ 15
−
E+PLT58-3C92
≥370
≤ 2.0
−
≤ 13
−
E+E58-3C93
≥320
≤ 2.4(1)
−
≤ 15(1)
−
E+PLT58-3C93
≥320
≤
−
≤
−
E+E58-3C94
≥320
≤ 2.4
−
≤ 15
−
E+PLT58-3C94
≥320
≤ 2.0
−
≤ 13
−
E+E58-3C95
≥320
−
≤ 15.5
≤ 14.8
−
E+PLT58-3C95
≥320
−
≤ 13.1
≤ 12.5
−
E+E58-3F3
≥300
≤ 3.0
−
−
≤ 4.7
E+PLT58-3F3
≥300
≤ 2.6
−
−
≤ 4.0
E+E58-3F4
≥250
−
−
−
−
E+PLT58-3F4
≥250
−
−
−
−
1.
2.0(1)
13(1)
Measured at 140 °C.
Properties of core sets under power conditions (continued)
B (mT) at
GRADE
H = 250 A/m;
f = 10 kHz;
T = 100 °C
CORE LOSS (W) at
f = 500 kHz;
ˆ = 50 mT;
B
T = 100 °C
f = 500 kHz;
ˆ = 100 mT;
B
T = 100 °C
f = 1 MHz;
ˆ = 30 mT;
B
T = 100 °C
f = 3 MHz;
ˆ = 10 mT;
B
T = 100 °C
E+E58-3F4
≥250
−
−
≤ 7.4
≤ 12
E+PLT58-3F4
≥250
−
−
≤ 6.25
≤ 10
2008 Sep 01
5
Ferroxcube
Planar E cores and accessories
E58/11/38
DATA SHEET STATUS DEFINITIONS
DATA SHEET
STATUS
PRODUCT
STATUS
DEFINITIONS
Preliminary
specification
Development
This data sheet contains preliminary data. Ferroxcube reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Ferroxcube reserves the right
to make changes at any time without notice in order to improve design and
supply the best possible product.
DISCLAIMER
Life support applications  These products are not designed for use in life support appliances, devices, or systems
where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube
for any damages resulting from such application.
PRODUCT STATUS DEFINITIONS
STATUS
INDICATION
DEFINITION
Prototype
These are products that have been made as development samples for the purposes of
technical evaluation only. The data for these types is provisional and is subject to
change.
Design-in
These products are recommended for new designs.
Preferred
These products are recommended for use in current designs and are available via our
sales channels.
Support
These products are not recommended for new designs and may not be available
through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
6
Similar pages