Gamewell-FCI E60-24MCC-FR Cooper-wheelock Datasheet

Cooper-Wheelock
Series E60
Description
Series E60 Speakers
and Speaker Strobes
Series E60 Speakers provide high audio output with clear
audibility and are designed to meet the critical needs of the
life safety industry for effective emergency voice communications and tone signaling. In addition, the strobes provide
visible signaling to alert the hearing impaired.
The Cooper-Wheelock Series E60 Ceiling Speakers and
Speaker Strobes are designed for high efficiency sound
output, with dual voltage (25/70 VRMS) capability and field
selectable taps from 1/8 to 2 watts. These E60 Multi-Candela ceiling appliances are part of the new family of ceiling
mount strobe appliances that will also be available on
strobes, horns and horn/strobes. Optional Extender (E60
Ext) is for mounting on 4” (10.2 cm) backboxes with no
extension ring.
The Series E60 Speaker Strobe models incorporate the
Low Current draw Series RSS Strobes. These ceiling
mount round models are available in Cooper-Wheelock
patented MCC multi-candela ceiling strobe with field selectable intensities of 15/30/75/95cd or the high intensity
MCCH strobe with field selectable 115/177cd.
The low profile design incorporates a speaker mounting
plate for faster and easier installation. Each model has a
built-in level adjustment feature and snap-on cover with no
visible mounting screws.
The strobe portion of all Series E60 Speaker Strobes may
be synchronized when used in conjunction with the Cooper-Wheelock SM-12/24-R and/or DSM-12/24-R sync
modules. Cooper-Wheelock synchronized strobes offer an
easy way to comply with ADA recommendations concerning photosensitive epilepsy.
Series E60 Speaker Strobes are UL Listed for indoor use
under Standard 1971 (Signaling Devices for the HearingImpaired) and Standard 1480 (Speaker Appliances), and
use a Xenon flashtube with solid state circuitry enclosed in
a rugged Lexan® lens to provide maximum reliability for
effective visual signaling. All inputs are supervised and
employ IN/OUT wiring terminals for fast installation using
12 to 18 AWG wiring. Color options for the Series E60
Speakers and Speaker Strobes are red and white.
E60 Speaker Strobes
E60 Speaker
Features
• Meets UL Standards 1971 and 1480 (model
dependent).
• ADA/NFPA/ANSI compliant.
• Complies with OSHA 29 Part 1910.165.
• Ceiling mount strobe models are available with field
selectable candela settings of 15/30/75/95cd or
115/177 cd (Multi-candela models).
• Strobes produce 1 flash per second over the regulated
voltage range.
• 24 VDC with wide UL “Regulated Voltage” using filtered
DC or unfiltered VRMS input voltage.
• Synchronize with the Cooper-Wheelock SM and DSM.
• Field selectable taps for 25 or 70 VRMS operation from
1/8 watt up to 2 watts.
• High efficiency design for maximum output at minimum
wattage across a frequency range of 400 to 4000 Hz.
• Fast installation with IN/OUT screw terminals using
12 to 18 AWG wires.
• Optional extender (E60 Ext) is used for mounting on
4” (10.2 cm) backboxes with no extension ring.
Lexan® is a registered trademark of GE Plastics, a subsidiary of General Electric Company.
An ISO 9000-2000 Company
SIGNALING
FM
APPROVED
S5391
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
9021-60128 Rev. A page 1 of 3
NOTE: All CAUTIONS and WARNINGS are identified by
the symbol . All warnings are printed in bold capital letters.
WARNING: PLEASE READ THESE SPECIFICA!
TIONS AND ASSOCIATED INSTALLATION
INSTRUCTIONS CAREFULLY BEFORE USING,
SPECIFYING OR APPLYING THIS PRODUCT. VISIT
WWW.COOPERWHEELOCK.COM OR CONTACT COOPER-WHEELOCK FOR THE CURRENT INSTALLATION
INSTRUCTIONS. FAILURE TO COMPLY WITH ANY
OF THESE INSTRUCTIONS, CAUTIONS OR
WARNINGS COULD RESULT IN IMPROPER
APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY
SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR
DEATH TO YOU AND/OR OTHERS.
General Notes:
• Strobes are designed to flash at 1 flash per second minimum over their “Regulated Voltage Range”.
Note that NFPA-72 specifies a flash rate of 1 to 2
flashes per second and ADA Guidelines specify a flash
rate of 1 to 3 flashes per second.
• All candela ratings represent minimum effective Strobe
intensity based on UL Standard 1971.
• Series NS Strobe products are listed under UL Standard
1971 for indoor use with a temperature range of 32°F to
120°F (0°C to 49°C) and maximum humidity of 93%
(± 2%).
• “Regulated Voltage Range” is the newest terminology
used by UL to identify the voltage range. Prior to this
change, UL used the terminology “Listed Voltage
Range”.
Architect and Engineer Specifications
The speaker appliances shall be Cooper-Wheelock Series
E60 Speakers and the speaker strobe appliances shall be
Cooper-Wheelock Series E60 Speaker Strobes or
approved equals. The speakers shall be UL Listed under
Standard 1480 for Fire Protective Service and speakers
equipped with strobes shall be listed under UL Standard
1971 for Emergency Devices for the Hearing-Impaired. In
addition, the strobes shall be certified to meet the requirements of FCC Part 15, Class B.
All speakers shall be designed for a field selectable input of
either 25 or 70 VRMS, with selectable power taps from 1/8
watt to 2 watts. All models shall have listed sound output of
up to 89 dB at 10 feet and a listed frequency response of
400 to 4000 Hz. The speaker shall incorporate a sealed
back construction. All inputs shall employ terminals that
accept 12 to 18 AWG wire sizes. The strobe portion of the
appliance shall produce a flash rate of one (1) flash per
second over the Regulated Voltage Range and shall incorporate a Xenon flashtube enclosed in a rugged Lexon®
lens. The strobe shall be of low current design. Where
Multi-Candela Speaker Strobes are specified, the strobe
intensity shall have field selectable settings and shall be
rated per UL Standard 1971 15/30/75/95 cd or 115/77 cd
for ceiling mount. The selector switch for selecting the candela shall be tamper resistant.
When synchronization is required, the strobe portion of the
appliance shall be compatible with the Cooper-Wheelock's
SM-12/24-R and/or DSM-12/24-R sync modules. The
strobes shall not drift out of synchronization at any time
during operation. If the sync module or power supply fails
to operate, (i.e., contacts remain closed), the strobe shall
revert to non-synchronized flash rate.
Table 1: Average RMS Current
E60 Strobe Current - Ceiling Mount
E60
24MCC
24 MCCH
Speaker 15cd 30cd 75cd 95cd 115cd 177cd
Strobes
24 vdc
0.045 0.070 0.119 0.159 0.195 0.270
UL max*
0.065 0.105 0.189 0.249 0.300 0.420
* RMS current ratings are per UL average RMS method.
UL max current rating is the maximum RMS current within
the listed voltage range (16-33v for 24v units). For strobes,
the UL max current is usually at the minimum listed voltage
(16v for 24v units). For audibles, the max. current is usually
at the maximum listed voltage (33 v for 24 units). For unfiltered FWR ratings, see installation instructions.
The speaker and speaker strobe appliances shall be
designed for indoor flush mounting. The speaker and
speaker strobe shall incorporate a speaker mounting plate
with a snap-on grille cover with no visible screws for a
level, aesthetic finish and shall mount to standard electrical
hardware.
The finish of the Series E60 Speakers and Speaker
Strobes shall be white or red. All speaker and speaker
strobe appliances shall be backward compatible.
Table 2: E60 UL Reverberant dBA @ 10 Feet**
watts
E60 Speaker
E60 Speaker
Strobe
1/8
77
77
1/4
79.5
79.5
1/2
82.5
82.5
1
85
85
2
88
88
**dBA ratings are based on UL testing under UL Standard 1480.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
9021-60128 Rev. A page 2 of 3
Specifications and Ordering Information
Model
Wall
Mount
Ceiling
Mount
NonSync
Strobe Sync w/
SM and DSM
Strobe
Candela
Model Model
Color Color
RED WHITE
Mounting
Options
E60-R
X
_
_
_
X
_
Q,U
E60-W
X
_
_
_
_
X
Q,U
E60-24MCC-FR
_
X
X
X
15/30/75/95
X
_
Q,U,V
E60-24MCC-FW
_
X
X
X
15/30/75/95
_
X
Q,U,V
E60-24MCCH-FW
_
X
X
X
115/177
_
X
Q,U,V
E60-24MCCH-FR
_
X
X
X
115/177
X
_
Q,U,V
E60EXT-R**
X
E60EXT-W**
X
NOTE 1: **E60 EXT is an attractive extender ring that mounts behind the peaker to permit mounting to a 4” square x 2 1/8” deep
electrical box without a need for an extension ring on the box.
Mounting Accessories
Mounting
Options Description
Q
Max. Number of Conductors
AWG #18 AWG. #16 AWG#14 AWG.#12
4” Square 2-1/8” or 1-1/2” Deep w/
1-1/2” 8 1-1/2” 8 1-1/2” 8 1-1/2” 4
2-1/8” 8 2-1/8” 8 2-1/8” 8 2-1/8” 8
See Note 1 Extension Ring, Flush (BO)
U
V
5” Square Backbox with Extension Ring, Flush (BO)
SSB-4 Ceiling Support Bridge
Provisions for (4) J-nuts #8-32 LB 3-3/8” square Material:Steel
Note 1: Option Q is typical of a steel city 52171 box with a steel city 53151 extension ring or equal.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
9021-60128 Rev. A page 3 of 3
Similar pages