Gamewell-FCI E90-24MCC-FW Cooper-wheelock e series low-profile speakers & speaker strobe Datasheet

Cooper-Wheelock E Series
Low-Profile Speakers & Speaker Strobes
Features
• ADA/NFPA/UFC/ANSI compliant
• Complies with OSHA 29 Part 1910.165
• Wall mount models are available with
Description
E90 Series Speaker Strobe
Cooper-Wheelock’s Series E Low Profile
Speakers and Speaker Strobes are designed
for high efficiency sound output, with dual
voltage (25/70 VRMS) capability and field
selectable taps from 1/8 to 2 watts. The low
profile design incorporates a speaker mounting plate for faster and easier installation.
Each model has a built-in level adjustment
feature and an aesthetic two (2) screw grille
cover.
The Series E Speaker Strobe models incorporate the Low Current draw Series RSS
Strobes.
E70 Series Speaker Strobe
Strobe options for wall mount models include
15/75 or Cooper-Wheelock’s patented MCW
multi-candela strobe with field selectable candela settings of 15/30/75/110cd or the high
intensity MCWH strobe with field selectable
135/185cd.
Ceiling mount models are available in Cooper-Wheelock’s patented MCC multi-candela
ceiling strobe with field selectable intensities
Multi-Candela Indicator
of 15/30/75/95cd or the high intensity MCCH
(bottom of Strobe Lens)
strobe with field selectable 115/177cd.
Series E Speakers and Speaker Strobes provide high audio output with clear
audibility and are designed to meet the critical needs of the life safety industry for
effective emergency voice communications, tone signaling and visible signaling
to alert the hearing impaired.
The strobe portion of all Series E Speaker Strobes may be synchronized when
used in conjunction with the Cooper-Wheelock SM, DSM Sync Modules or a
power supply with Patented Cooper-Wheelock Sync Protocol. CooperWheelock’s synchronized strobes offer an easy way to comply with ADA recommendations concerning photosensitive epilepsy.
Series E Speaker Strobes are UL Listed for indoor use under Standard 1971
(Signaling Devices for the Hearing-Impaired) and Standard 1480 (Speaker Appliances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged
Lexan® lens to provide maximum reliability for effective visual signaling. All
inputs are supervised and employ IN/OUT wiring terminals for fast installation
using #12 to #18 AWG wiring.
Color options for the E Series Speakers and Speaker Strobes offered are
colored red or white.
E Low Profile Speakers & Strobes
CS-2242 09/01/06
Page 1 of 4
Field Selectable Candela Settings of
15/30/75/110cd or 135/185cd (MultiCandela models), or 15/75cd (Single
Candela model)
• Ceiling mount models are available with
field selectable candela settings of
15/30/75/95cd or 115/177cd (multicandela models)
• Strobes produce 1 flash per second over
the regulated voltage range
• 24 VDC with wide UL “Regulated Voltage”
using filtered DC or unfiltered VRMS input
voltage
• Synchronize with Cooper-Wheelock SM,
DSM or a power supply with built-in Cooper-Wheelock sync protocol
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
• High efficiency design for maximum output
at minimum wattage across a frequency
range of 400 to 4000 HZ
• Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires
Listings
Listings and approvals below apply to the
basic E Series Low Profile Speakers and
Speaker Strobes. In some cases, certain
modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: files S2652 (Speakers), S2652/
S5391 (Strobe/Speakers)
• MEA Listed. file 151-92-E Vol. XXI
• CSFM approved: files 7320-0785:134,
(Speakers), 7125-0785:146
(Strobes/Speakers), 7125-0785:152
General Notes
• Strobes are designed to flash once per second minimum over their “Regulated
Voltage Range”. Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per
second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
• All candela ratings represent min. effective Strobe intensity per UL Standard 1971.
• Series E Speaker Strobes and Series E Speakers are listed under UL Standard
1971 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°C) and
maximum humidity of 85%.
• “Regulated Voltage Range” is the newest terminology used by UL to identify voltage range. Prior to this change, UL used the term, “Listed Voltage
Range”.
WARNING: CONTACT COOPER-WHEELOCK
FOR THE CURRENT “INSTALLATION INSTRUCTIONS” AND “GENERAL INFORMATION” SHEET (P82380) ON THESE PRODUCTS.
THESE DOCUMENTS UNDERGO PERIODIC
CHANGES. IT IS IMPORTANT THAT YOU HAVE
CURRENT INFORMATION ON THESE PRODUCTS. THESE MATERIALS CONTAIN IMPORTANT INFORMATION THAT SHOULD BE READ
PRIOR TO SPECIFYING OR INSTALLING
THESE PRODUCTS, INCLUDING:
Engineer’s Specifications
•
TOTAL CURRENT REQUIRED BY ALL
APPLIANCES CONNECTED TO SYSTEM
SECONDARY POWER SOURCES.
•
FUSE RATINGS ON NOTIFICATION
APPLIANCE CIRCUITS TO HANDLE PEAK
CURRENTS FROM ALL APPLIANCES ON
THOSE CIRCUITS.
•
COMPOSITE FLASH RATE FROM MULTIPLE
STROBES WITHIN A PERSON’S FIELD OF
VIEW.
•
ADDING, REPLACING OR CHANGING
APPLIANCES OR CHANGING CANDELA
SETTINGS WILL AFFECT CURRENT DRAW.
RECALCULATE CURRENT DRAW TO
ENSURE THAT THE TOTAL AVERAGE CURRENT AND TOTAL PEAK REQUIRED BY ALL
APPLIANCES DO NOT EXCEED THE RATED
CAPACITY OF THE POWER SOURCES OR
FUSES.
•
THE VOLTAGE APPLIED TO THESE
PRODUCTS MUST BE WITHIN THEIR
“REGULATED VOLTAGE RANGE”.
•
INSTALLATION OF 110 CANDELA STROBE
PRODUCTS IN SLEEPING AREAS.
•
INSTALLATION IN OFFICE AREAS AND
OTHER SPECIFICATION AND INSTALLATION ISSUES.
•
USE STROBES ONLY ON CIRCUITS WITH
CONTINUOUSLY APPLIED OPERATING
VOLTAGE. DO NOT USE STROBES ON
CODED OR INTERRUPTED CIRCUITS IN
WHICH THE APPLIED VOLTAGE IS CYCLED
ON AND OFF AS THE STROBES MAY NOT
FLASH.
•
FAILURE TO COMPLY WITH THE
INSTALLATION INSTRUCTIONS OR GENERAL INFORMATION SHEETS COULD RESULT IN IMPROPER INSTALLATION, APPLICATION, AND/OR OPERATION OF THESE
PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE AND SERIOUS INJURY OR
DEATH TO YOU AND/OR OTHERS.
•
CONDUCTOR SIZE (AWG), LENGTH AND
AMPACITY SHOULD BE TAKEN INTO CONSIDERATION PRIOR TO DESIGN AND INSTALLATION OF THESE PRODUCTS, PARTICULARLY IN RETROFIT INSTALLATIONS.
The speaker appliances shall be Cooper-Wheelock Series E Speakers and
speaker strobe appliances shall be Cooper-Wheelock Series E Speaker Strobes or
approved equals. The speakers shall be UL Listed under Standard 1480 for Fire
Protective Service and speakers equipped with strobes shall be listed under UL
Standard 1971 for Signaling Devices for the Hearing-Impaired. In addition, the
strobes shall be certified to meet the requirements of FCC Part 15, Class B.
All speakers shall be designed for a field selectable input of either 25 or 70 VRMS,
with selectable power taps from 1/8 watt to 2 watts. All models shall have listed
sound output of up to 87 dB at 10 feet and a listed frequency response of 400 to
4000 Hz. The speaker shall also incorporate a sealed back construction. All inputs
shall employ terminals that accept #12 to #18 AWG wire sizes.
The strobe portion of the appliance shall produce a flash rate of one (1) flash per
second over the Regulated Voltage Range and shall incorporate a Xenon flashtube
enclosed in a rugged Lexan® lens. The strobe shall be of low current design.
Where, Multi-Candela Speaker Strobes are specified, the strobe intensity has field
selectable settings and shall be rated per UL Standard 1971 at 15/30/75/110cd or
135/185cd for wall mount and 15/30/75/95cd or 115/177cd for ceiling mount. The
selector switch for selecting the candela shall be tamper resistant. The 15/75 candela strobe shall be specified when 15 candela UL Standard 1971 listing with 75
candela on-axis is required (ADA compliance).
When synchronization is required, the strobe portion of the appliance shall be compatible with Cooper-Wheelock’s SM, DSM sync modules or the power supply with
built-in Patented Cooper-Wheelock Sync Protocol. The strobes shall not drift out of
synchronization at any time during operation. If the sync module or Power Supply
fails to operate, (i.e., contacts remain closed), the strobe shall revert to a nonThe speaker and speaker strobe appliances shall be designed for indoor surface or
flush mounting. The speaker and speaker strobe shall incorporate a speaker
mounting plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall mount to standard electrical hardware requiring no additional
trimplate or adapter. The finish of the Series E speakers and speaker strobes shall
be white, red or nickel plate. All speakers and speaker strobe appliances shall be
backward compatible.
Cooper-Wheelock products must be used within their published specifications and
must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance with local, state
and federal codes, regulations and laws. Specification, application, installation,
operation, maintenance and testing must be performed by qualified personnel for
proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters’ Laboratories (UL), National Electrical Code (NEC),
Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other applicable building and fire standards, guidelines,
regulations, laws and codes including, but not limited to, all appendices and
amendments and the requirements of the local authority having jurisdiction (AHJ).
E Low Profile Speakers & Strobes
CS-2242 09/01/06
Page 2 of 4
FROM
PRECEDING
APPLIANCE OR VOICE
EVACUATION
PANEL
+
Wiring Diagram
SERIES E SPEAKER & STROBE
OPERATE INDEPENDENTLY
(NON-SYNC OR SYNC)
+
-
+
-
FROM
PRECEDING
STROBE, SYNC
MODULE, POWER
SUPPLY OR
FACP
NEXT
+TO
STROBE OR
- EOLR
+-
+-
STROBE
SPEAKER
Audible NAC Cir.
Strobe NAC Cir.
SERIES E SPEAKER STROBES
SYNCHRONIZED WITH MULTIPLE
DSM MODULES
Note: Figure shows interconnection to strobe through sync
module. Speaker portion requires 2 separate conductors to
FACP.
F
A
C
P
TO NEXT
APPLIANCE
OR EOLR
Audible NAC Cir.
DSM #1
Sync
+
-
E
E
E
E
E
DSM #2
Strobe NAC Cir.
Sync
Audible NAC Cir.
DSM #3
+
Sync
Strobe NAC Cir.
E
+
-
DSM Interconnecting wiring shown. Maximum of
twenty (20)
STROBE
NAC
CIRCUIT
OUT
DSM
SYNC
+
-
+OUT 1
+ IN 1
SERIES E SPEAKER STROBE
APPLIANCES SYNCHRONIZED WITH
DSM MODULE SINGLE CLASS “A”
E
E
E
E
+
AUDIBLE
MINUS 2
+ IN 2
CS-2242 09/01/06
E
MINUS 1
FACP
STROBE
NAC
CIRCUIT
RETURN
E Low Profile Speakers & Strobes
E
+ OUT 2
Page 3 of 4
NOTE: All CAUTIONS and WARNINGS are
identified by the symbol . All warnings are
printed in bold capital letters. PLEASE READ
THESE SPECIFICATIONS AND ASSOCIATED
INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR
APPLYING THIS PRODUCT. FAILURE TO
COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD
RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF
THESE PRODUCTS IN AN EMERGENCY
SITUATION, WHICH COULD RESULT IN
PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
S Y N C M O D E LS / P O W E R S UP P LY
M OD EL
N UM B E R
IN P U T
V O LT A G E
(VD C )
A VER A GE
M EA N
C UR R E N T
@ 24 VD C
M O U N T IN G
O P T IO N S
SM -12/ 24-R
24
.028
W
D SM -12/24-R
24
.035
W
SM Sync Module is rated for 3.0 amperes @ 24 VDC.
DSM Sync Module is rated for 3.0 amperes per circuit. The maximum number of interconnected DSM modules is twenty (20). Refer
to Data Sheet S3000 or Installation Instructions P83123 for SM and
P83177 for DSM.
Ordering Information
S T RO BE
C A NDEL A
NO NS Y NC
E7 0 - 2 4 MCW - FR
1 5 /3 0 /7 5 /1 1 0
X
X
E7 0 - 2 4 MCW - FW
1 5 /3 0 /7 5 /1 1 0
X
X
M O DEL
E7 0 - 2 4 1 5 7 5 W - FR
S Y NC M O DEL
W /S M , C O L O R
WALL/
C EIL ING
M O UNT ING
O P T IO NS ***
UL
A G ENC Y A P P RO V A L S
M EA C S FM
FM
BFP
Re d
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
X
W h ite
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
X
1 5 ( 7 5 o n A x is )
X
X
Re d
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
X
E7 0 - R
-
-
-
Re d
W a ll/Ce ilin g
Q ,V
X
X
X
*
X
E7 0 - W
-
-
-
W h ite
W a ll/Ce ilin g
Q ,V
X
X
X
*
X
*
E7 0 - 2 4 MCW H- FR
1 3 5 /1 8 5
X
X
Re d
W a ll
L ,O ,P,Q ,U,Y
X
*
*
*
E7 0 - 2 4 MCW H- FW
1 3 5 /1 8 5
X
X
W h ite
W a ll
L ,O ,P,Q ,U,Y
X
*
*
*
*
1 5 /3 0 /7 5 /9 5
X
X
W h ite
Ce ilin g
Q ,V
X
*
X
*
*
E9 0 - W
-
-
-
W h ite
W a ll/Ce ilin g
Q ,V
X
X
X
*
X
E9 0 - R
-
-
-
Re d
W a ll/Ce ilin g
Q ,V
X
X
X
*
X
1 1 5 /1 7 7
X
X
W h ite
Ce ilin g
Q ,V
X
*
*
*
*
E9 0 - 2 4 MCC- FW
E9 0 - 2 4 MCCH- FW
T A BL E 1: A V ERA GE RM S C URRENT *
E70/E90
SPEA KER
ST ROBES
16 v dc
24 v dc
33 v dc
E70 ST ROBE C URRENT - WA L L M OUNT
241575W
15/75c d
0.101
0.064
0.047
24M C W
15c d
0.062
0.041
0.032
30c d
0.102
0.065
0.047
75c d
0.192
0.116
0.081
E90 ST ROBE C URRENT - C EIL ING M OUNT
24M C WH
110c d
0.265
0.155
0.107
135c d
0.300
0.195
0.145
24M C C
185c d
0.420
0.270
0.190
15c d
0.068
0.045
0.035
30c d
0.112
0.072
0.052
24M C C H
75c d
0.211
0.128
0.089
95c d
0.292
0.171
0.118
115c d
0.300
0.195
0.145
177c d
0.420
0.270
0.190
* Average RMS Current is per UL average RMS method and Average Mean Current is per UL average mean method. For rate In
Rush and Peak current across the UL Listed voltage range for both filtered DC and unfiltered VRMS (FWR), see installation instructions.
** Refer to mounting options data sheet.
TABLE 2: E70/E90 UL REVERBERANT dBA @ 10 Feet**
w atts
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
1/8
1/4
1/2
1
2
E Speaker
78.1
80.8
83.8
86.0
88.8
E Speaker Strobe
77.5
80.4
83.2
85.7
87.8
** dBA ratings based
on UL testing under
UL Standard 1480
Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more
information, contact Gamewell-FCI.
Page 4 of 4
E Low Profile Speakers & Strobes CS-2242
09/01/06
Similar pages