Vishay EB73DBC18SGFXA Edgeboard connectors, dual readout Datasheet

EB7D
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
At sea level: 1800VRMS.
At 70,000 feet [21,336 meters]: 450VRMS.
Insulation Resistance: 5000 Megohm minimum at 500VDC
potential.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of 0.070" [1.78mm] thick steel test gauge,
contact resistance less than 0.030V at 5 amps and individual
contact retention force when measured with a 0.054" [1.37mm]
thick steel test slug greater than 1/2 ounce.
Shock: Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
Vibration: 2 hours in each of 3 mutually perpendicular planes,
frequency sweep 10 to 55cps at 0.06 double amplitude with
no loss of continuity.
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows.
Number of Contacts: 6, 10, 12, 15, 18, 22, 36, 43 per side.
Contact Spacing: 0.156" [3.96mm] center to center.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: Dual Readout = 0.260" [6.60mm].
NOTE: High temperature burn-in, edgeboard connectors,
0.156" [3.96mm] center to center are on page 20 of this catalog.
• 0.156" C-C x 0.140" grid [3.96mm x 3.56mm].
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse conditions
such as vibration or PC board irregularities.
• Accepts PC board thickness of 0.054" - 0.071"
[1.37mm -1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of a contact position.
• Selective gold plating.
• Polarizing key is reinforced nylon, may be inserted by hand,
requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
to contact which might be caused by warped or out of
tolerance boards.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File
E65524, Project 77CH3889.
APPLICATIONS
For use with 0.062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on 0.156" [3.96mm] centers.
MATERIAL SPECIFICATIONS
Body: (Standard) Glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94V-0). (Optional - See Ordering
Information):
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame retardant
(UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94V-0).
Contacts: Phosphor bronze.
Polarizing Key: Glass reinforced nylon, flame retardant (UL 94H-B).
Contact Plating: Gold (See Ordering Information).
ORDERING INFORMATION
EB7
MODEL
1
BODY
MATERIAL
D
DUAL
READOUT
Optional Body
Material
1 = Diallyl Phthalate.
3 = Glass-filled
Polyester.
5 = Glass-filled
Polyphenylene
Sulfied.
Omit for
standard
phenolic.
www.vishay.com
8
B
OPTIONAL
CONTACTS
A
STANDARD
TERMINAL
VARIATIONS
Beryllium Copper
A, E,
contacts optional.
C or K
Available in “A” and
“E” contact styles
only. (Omit for
standard.)
22
CONTACTS
SG
CONTACT
PLATING
X
MOUNTING
VARIATIONS
SG = Selective Gold
6, 10, 12, Plating (0.00003"
15, 18, 22, [0.000762mm] minimum
thick) on contact area with
36 or 43
Gold Flash on terminal.
SGF = Selective Gold
Plating (0.00001"
[0.000254mm] minimum
thick) on contact area with
Gold Flash on terminal.
All Gold Plating over
0.00005" [0.00127mm]
minimum, Nickel
Underplate.
Contact factory for
additional plating options.
For technical questions, contact [email protected]
A
POLARIZING
KEY
POSITIONS
Key(s) are
located to right
of position(s)
designated.
Required only
when polarizing
keys are to be
factory installed.
Document Number 36003
Revision 14-Aug-02
EB7D
Vishay Dale
Edgeboard Connectors, Dual Readout
DIMENSIONS in inches [millimeters]
0.030 [0.762]
0.062 ± 0.010
[1.57 ± 0.254]
R Typ.
A
B
D
E
C
C
0.156 ± 0.005
[3.96 ± 0.127]
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Contact
Variations
0.440
[11.18]
0.250
[6.35]
Section C-C
F
± 0.010 [0.254]
Polarizing Key
Type “A”
Types “C” and “K”
0.054 - 0.071
[1.37 - 1.80]
0.054 - 0.071
[1.37 - 1.80]
0.260 [6.60]
Depth of Card
Insertion
0.260 [6.60]
Depth of Card
Insertion
0.250
[6.35]
# OF CONTACT
POSITIONS
0.028
[.711]
0.230
[5.84]
0.245
[6.22]
When ordering polarizing keys individually, specify
Model Number: PK-7 between contacts. Hand
insertion tool, TPK-7, provided on request.
0.140 [3.56]
A
B
D
E
F
6
1.78 [45.21]
1.53 [38.86]
1.22 [30.99]
1.10 [27.94]
0.328 [8.33]
10
2.41 [61.21]
2.16 [54.86]
1.84 [46.74]
1.72 [43.69]
0.328 [8.33]
12
2.72 [69.09]
2.47 [62.74]
2.16 [54.86]
2.04 [51.82]
0.328 [8.33]
15
3.19 [81.03]
2.94 [74.68]
2.62 [66.55]
2.50 [63.50]
0.328 [8.33]
18
3.66 [92.96]
3.41 [86.61]
3.09 [78.49]
2.97 [75.44]
0.328 [8.33]
22
4.28 [108.71]
4.03 [102.36]
3.72 [94.49]
3.60 [91.44]
0.328 [8.33]
36
6.53 [165.86]
6.22 [157.99]
5.91 [150.11]
5.78 [146.81]
0.438 [11.13]
43
7.62 [193.55]
7.30 [185.42]
7.00 [177.80]
6.80 [172.72]
0.500 [12.70]
Document Number 36003
Revision 14-Aug-02
For technical questions, contact [email protected]
www.vishay.com
9
EB7D
Vishay Dale
Edgeboard Connectors, Dual Readout
MOUNTING VARIATIONS in inches [millimeters]
Type “V”
Clearance Hole
Type “VI”
Clearance Hole
No Mounting Pad
0.250
[6.35]
Ref.
0.142 [3.61] Dia.
0.142
[3.61]
Dia.
0.250
[6.35]
Ref.
0.010 [.254]
0.000 [.000]
0.220
[5.59]
Ref.
0.128 [3.25] Dia.
Type “Z”
Floating Bushing Radial Float 0.047 [1.19]
Type “Y”
Threaded Insert
0.250
[6.35]
Ref.
0.250
[6.35]
Ref.
0.220
[5.59]
Ref.
Type “X”
Clearance Hole
0.250
[6.35]
Ref.
Type “XI”
Clearance Hole
No Mounting Pad
0.128
[3.25]
Dia.
Type “W”
No Mounting Flange
4-40
UNC-2B
0.250 [6.35]
Ref.
0.218
[5.54]
Ref.
NOTE: Overall body length
increased by 0.060 [1.52].
0.250
[6.35]
Dia.
0.116
[2.95]
Dia.
0.270 [6.86]
TERMINAL VARIATIONS in inches [millimeters]
Type “A”
Type “C” and “K”
Type “E”
Pierced
Solder Dip
Card Extender
To fit 0.051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
0.200 ± 0.015
[5.08 ± 0.381]
0.140 ± 0.015
[3.56 ± 0.381]
0.086 x 0.008
[2.18 x 0.203]
G
See Table
www.vishay.com
10
0.050
[1.27]
120°
Typ.
0.220 ± 0.015
[5.59 ± 0.381]
TYPE
G
C
0.125 ± 0.015 [3.18 ± 0.381]
K
0.200 ± 0.015 [5.08 ± 0.381]
0.086
[2.18]
0.100
[2.54]
15°
Typ.
For technical questions, contact [email protected]
Uses
Type “A”
Contact
Document Number 36003
Revision 14-Aug-02
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages