Littelfuse EC103M175 Teccor brand thyristors 0.8 amp sensitive scr Datasheet

Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
EC103xx & SxSx Series
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Features & Benefits
• RoHS compliant
• Glass – passivated
junctions
Main Features
• Voltage capability up
to 600 V
• Surge capability up to
20 A
Applications
Symbol
IT(RMS)
VDRM /VRRM
IGT
Value
Unit
0.8
A
400 to 600
V
12 to 500
μA
Typical applications are capacitive discharge systems
for strobe lights and gas engine ignition. Also controls
for power tools, home/brown goods and white goods
appliances.
Schematic Symbol
A
K
G
Absolute Maximum Ratings — Sensitive SCRs
Parameter
Test Conditions
Value
Unit
IT(RMS)
Symbol
RMS on-state current
TC = 75°C
0.8
A
IT(AV)
Average on-state current
TC = 75°C
0.51
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
16
single half cycle; f = 60Hz;
TJ (initial) = 25°C
20
I2t Value for fusing
tp = 8.3 ms
1.6
A2s
Critical rate of rise of on-state current
f = 60 Hz ; TJ = 110°C
50
A/μs
Peak gate current
TJ = 110°C
1
A
Average gate power dissipation
TJ = 110°C
0.1
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 110
°C
ITSM
I 2t
di/dt
IGM
PG(AV)
Tstg
TJ
EC103xx & SxSx Series
Peak non-repetitive surge current
163
Revised: June 21, 2011 04:14 PM
A
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Value
Symbol
IGT
VGT
Test Conditions
MAX.
VD = 6V; RL = 100 Ω
dv/dt
VD = VDRM; RGK = 1kΩ
SxS1
EC103X1
SxS2
EC103X2
12
50
MAX.
400V
600V
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 110°C
MIN.
IT = 20mA (initial), RGK = 1kΩ
MAX.
tq
(1)
MAX.
tgt
IG = 2 x IGT; PW = 15µs; IT = 1.6A
SxS3
EC103X3
Unit
200
500
µA
0.8
MIN.
IH
SxS /
2N6565
EC103X
V
20
25
30
40
10
10
15
20
0.2
0.25
V
5
60
TYP.
V/μs
2
5
8
mA
50
45
μs
20
30
μs
(1) IT=1A; tp=50µs; dv/dt=5V/µs; di/dt=-5A/µs
Static Characteristics
Symbol
Test Conditions
IT = 1.2A; tp = 380 µs
VTM
Value
Unit
1.7
V
MAX.
TJ = 25°C
IDRM / IRRM
VDRM = VRRM
RGK = 1kΩ
1
TJ = 100°C
50
MAX.
TJ = 110°C
μA
100
Thermal Resistances
Symbol
Parameter
Rθ(J-C)
Junction to case (AC)
Rθ(J-A)
Junction to ambient
Value
EC103xy/2N6565
75
SxSy
60*
EC103xy/2N6565
160
Unit
°C/W
°C/W
Notes: x = voltage, y = sensitivity
* = Mounted on 1 cm2 copper (two-ounce) foil surface
EC103xx & SxSx Series
164
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Figure 1: Normalized DC Gate Trigger Current
vs. Junction Temperature
Figure 2: N
ormalized DC Gate Trigger Voltage
vs. Junction Temperature
2.0
Ratio of VGT / VGT (TJ = 25ºC)
Ratio of IGT/IGT (TJ = 25°C)
4.0
3.0
2.0
1.0
1.5
1.0
0.5
0.0
0.0
-40
-15
10
35
60
85
-40
110
-15
10
Junction Temperature (TJ) -- (°C)
Figure 3: Normalized DC Holding Current
vs. Junction Temperature
85
110
10
Instantaneous On-state Current (iT) – Amps
2.5
Ratio of IH / IH (TJ = 25°C)
60
Figure 4: O
n-State Current vs. On-State
Voltage (Typical)
3.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
TJ = 25°C
8
6
4
2
0
0.7
0.8
Junction Temperature (TJ) -- (°C)
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Instantaneous On-state Voltage (vT) – Volts
Figure 5: Power Dissipation (Typical)
vs. RMS On-State Current
Figure 6: M
aximum Allowable Case Temperature
vs. RMS On-State Current
0.7
115
Maximum Allowable Case Temperature
(TC) - °C
Average On-State Power Dissipation
[PD(AV)] - (Watts)
35
Junction Temperature (TJ) -- (°C)
0.6
105
0.5
95
0.4
0.3
85
0.2
75
0.1
65
0.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
RMS On-State Current [IT(RMS)] - Amps
RMS On-State Current [IT(RMS)] - Amps
EC103xx & SxSx Series
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
165
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
1.0
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Figure 7: Maximum Allowable Case Temperature
vs. Average On-State Current
Figure 8: Maximum Allowable Ambient Temperature
vs. RMS On-State Current
120
Maximum Allowable Ambient Temperature
(TA) - °C
Maximum Allowable Case Temperature
(TC) - °C
115
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
100
105
80
95
60
85
40
75
65
20
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
0.0
0.1
0.2
0.3
0.4
0.5
0
0.6
0.0
0.1
0.2
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable Ambient Temperature
vs. Average On-State Current
0.4
0.5
0.6
0.7
0.8
0.9
80
60
40
20
0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Average On-State Current [IT(AVE)] - Amps
Peak Discharge Current (ITM) -Amps
180
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
100
160
140
1 Hz
120
12 Hz
100
60 Hz
80
60
ITRM
40
20
tW
0
1
10
Pulse Current Duration (tW) - μs
Figure 11: Peak Repetitive Sinusoidal Pulse Current
Peak Discharge Current (ITM) - Amps
180
160
140
120
1 Hz
100
80
12 Hz
60
ITM
40
60 Hz
20
0
tW
1
100
10
Pulse Current Duration (tW) - μs
EC103xx & SxSx Series
1.0
Figure 10: Peak Capacitor Discharge Current
120
Maximum Allowable Ambient Temperature
(TA) - °C
0.3
RMS On-State Current [IT(RMS)] - Amps
166
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
100
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Figure 12: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive)
On-state Current (ITSM) – Amps
100.0
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. G
ate control may be lost during and immediately
following surge current interval.
2. O
verload may not be repeated until junction
temperature has returned to steady-state
rated value.
10.0
1.0
0.1
1
10
100
1000
Surge Current Duration -- Full Cycles
Figure 13: Simple Test Circuit for Gate Trigger Voltage and Current
Note: V
1 — 0 V to 10 V dc meter
VGT — 0 V to 1 V dc meter
IG — 0 mA to 1 mA dc milliammeter
R1 — 1 k potentiometer
Reset
Normally-closed
Pushbutton
100
+
6VDC
D.U.T.
IGT
–
V1
1k
(1%)
IN4001
IG
100
R1
VGT
To measure gate trigger voltage and current, raise gate
voltage (VGT) until meter reading V1 drops from 6 V to 1 V.
Gate trigger voltage is the reading on VGT just prior to V1
dropping. Gate trigger current IGT Can be computed from
the relationship
VGT
IGT = IG- ____
Amps
1000
where IG is reading (in amperes) on meter just prior to V1
dropping
Note: IGT may turn out to be a negative quantity (trigger
current flows out from gate lead). If negative current
occurs, IGT value is not a valid reading. Remove 1 k resistor
and use IG as the more correct IGT value. This will occur on
12 µA gate products.
EC103xx & SxSx Series
167
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Soldering Parameters
Pb – Free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
Physical Specifications
Terminal Finish
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Peak Temperature (TP)
tP
TP
Temperature
Reflow Condition
tS
time to peak temperature
Time
Environmental Specifications
100% Matte Tin-plated/Pb-free Solder
Dipped
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
Test
AC Blocking
Temperature Cycling
Temperature/
Humidity
Design Considerations
High Temp Storage
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the Thyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Low-Temp Storage
EC103xx & SxSx Series
Ramp-do
Ramp-down
168
Revised: June 21, 2011 04:14 PM
Thermal Shock
Autoclave
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 110°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
1008 hours; -40°C
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max)
transfer time between temperature
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
ANSI/J-STD-002, category 3, Test A
Lead Bend
MIL-STD-750, M-2036 Cond E
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Dimensions – TO-92 (E Package)
TC Measuring Point
A
B
Cathode
Anode
Gate
E
Millimeters
Min
Max
Min
Max
A
0.176
0.196
4.47
4.98
B
0.500
-
12.70
-
D
0.095
0.105
2.41
2.67
E
0.150
-
3.81
-
F
0.046
0.054
1.16
1.37
G
0.135
0.145
3.43
3.68
H
0.088
0.096
2.23
2.44
J
0.176
0.186
4.47
4.73
K
0.088
0.096
2.23
2.44
L
0.013
0.019
0.33
0.48
M
0.013
0.017
0.33
0.43
All leads insulated from case. Case is electrically nonconductive.
G
H
M
Inches
Dimension
F
L
D
K
J
Dimensions — Compak (C Package)
TC / TL Temperature
Measurement Point
B
D
M
A
Dimension
Gate
N
P
C
Cathode
Anode
H
F
L
E
J
0.079
(2.0)
K
0.079
(2.0)
G
0.079
(2.0)
0.040
(1.0)
0.030
(0.76)
0.110
(2.8)
Pad Outline
EC103xx & SxSx Series
Dimensions are in inches
(and millimeters).
169
Revised: June 21, 2011 04:14 PM
Inches
Millimeters
Min
Max
Min
Max
A
0.130
0.156
3.30
3.95
B
0.201
0.220
5.10
5.60
C
0.077
0.087
1.95
2.20
D
0.159
0.181
4.05
4.60
E
0.030
0.063
0.75
1.60
F
0.075
0.096
1.90
2.45
G
0.002
0.008
0.05
0.20
H
0.077
0.104
1.95
2.65
J
0.043
0.053
1.09
1.35
K
0.006
0.016
0.15
0.41
L
0.030
0.055
0.76
1.40
M
0.022
0.028
0.56
0.71
N
0.027
0.033
0.69
0.84
P
0.052
0.058
1.32
1.47
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Product Selector
Voltage
Part Number
400V
600V
X
X
EC103 x 1
EC103 x 2
800V
1000V
Gate Sensitivity
Type
Package
12μA
Sensitive SCR
TO-92
X
X
50μA
Sensitive SCR
TO-92
X / 2N6565
X
200μA
Sensitive SCR
TO-92
EC103 x 3
X
X
500μA
Sensitive SCR
TO-92
S x S1
X
X
12μA
Sensitive SCR
Compak
S x S2
X
X
50μA
Sensitive SCR
Compak
SxS
X
X
200μA
Sensitive SCR
Compak
S x S3
X
X
500μA
Sensitive SCR
Compak
EC103 x
Note: x = Voltage
Packing Options
Part Number
Marking
Weight
EC103xy / 2N6565
Packing Mode
Base Quantity
EC103xy / 2N6565
0.19 g
Bulk
2000
EC103xyRP
EC103xy
0.19 g
Reel Pack
2000
EC103xyAP
EC103xy
0.19 g
Ammo Pack
2000
SxSy
0.08 g
Embossed Carrier
2500
SxSyRP
Note: x = Voltage, y = sensitivity
TO-92 (3-lead) Reel Pack (RP) Radial Leaded Specifications
Meets all EIA-468-C Standards
1.6
(41.0)
0.236
(6.0)
0.708
(18.0)
0.02 (0.5)
0.098 (2.5) MAX
1.26
(32.0)
0.354
(9.0)
0.5
(12.7)
0.1 (2.54)
Cathode
0.2 (5.08)
Anode
Gate
0.157 DIA
(4.0)
14.17(360.0)
Flat up
1.97
(50.0)
Direction of Feed
EC103xx & SxSx Series
170
Revised: June 21, 2011 04:14 PM
Dimensions
are in inches
(and millimeters).
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Specifications
Meets all EIA-468-C Standards
0.236
(6.0)
1.62
(41.2)
0.708
(18.0)
0.02 (0.5)
0.098 (2.5) MAX
1.27
(32.2)
0.354
(9.0)
0.1 (2.54)
0.5
(12.7)
n of
Directio
0.157
(4.0) DIA
Anode
Cathode
0.2 (5.08)
Gate
Flat down
Feed
25 Devices per fold
1.85
(47.0)
12.2
(310.0)
1.85
(47.0)
Dimensions
are in inches
(and millimeters).
13.3
(338.0)
Compak Embossed Carrier Reel Pack (RP) Specifications
Meets all EIA-481-1 Standards
0.157
(4.0)
0.47
(12.0)
Anode
0.36
(9.2)
8.0
0.315
(8.0)
Cathode
Gate
0.059 DIA
(1.5)
12.99
(330.0)
0.512 (13.0) Arbor
Hole Dia.
Cover tape
Dimensions
are in inches
(and millimeters).
0.49
(12.4)
Direction of Feed
EC103xx & SxSx Series
171
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brand Thyristors
0.8 Amp Sensitive SCRs
Part Numbering System (TO-92)
Part Marking System
EC 103 D 1 75
TO-92 (E Package)
EC103D1
DEVICE TYPE
EC: TO-92 SCR
2N: JEDEC
Lead Form Dimensions
xx: Lead Form Option
®
YMLXX
CURRENT RATING
103: 0.8A (TO-92)
SENSITIVITY & TYPE
1: 12 µ A
2: 50 µ A
[blank]: 200 µ A
3: 500 µ A
VOLTAGE RATING
D: 400V
M: 600V
(JEDEC) 6565: 400V
Part Numbering System (Compak)
S 6
DEVICE TYPE
S: Compak SCR
VOLTAGE RATING
4: 400V
6: 600V
Part Marking System (Compak)
S 1
Compak (C Package)
SENSITIVITY & TYPE
1: 12 µ A
2: 50 µ A
[blank]: 200 µ A
3: 500 µ A
S6S1
®
YMXXX
CURRENT RATING
S: 0.8A (Compak)
EC103xx & SxSx Series
172
Revised: June 21, 2011 04:14 PM
©2011 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Similar pages