Ecliptek EC1100ETT-60.000M Oscillator Datasheet

EC11 Series
EC11
• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 5.0V supply voltage
• 14 pin DIP package
• Stability to ±20ppm
• Custom lead length,
gull wing options available
H 5.08
W 20.8
L 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
0.250MHz to 106.250MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
5.0VDC ±10%
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
250.000kHz to 24.000MHz
45mA Maximum
24.001MHz to 50.000MHz
55mA Maximum
50.001MHz to 66.667MHz
65mA Maximum
66.668MHz to 106.250MHz
85mA Maximum
Inclusive of Operating Temperature Range, Supply Voltage,
±100ppm, ±50ppm, ±25ppm, or
and Load
±20ppm Max. (0°C to 70°C Only)
w/TTL Load
2.4VDC Minimum
w/HCMOS Load
VDD-0.5VDC Minimum
w/TTL Load
0.4VDC Maximum
w/HCMOS Load
0.5VDC Maximum
0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of
6 nSeconds Maximum
Waveform w/HCMOS Load
Duty Cycle
Load Drive Capability
Tri-State Input Voltage
at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load
50 ±10(%) (Standard)
at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz
50 ±5(%) (Optional)
at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz
50 ±5(%) (Optional)
250.000kHz to 24.000MHz
10TTL Load or 50pF HCMOS Load
24.001MHz to 70.000MHz
10TTL Load or 15pF HCMOS Load
70.001MHz to 106.250MHz
10LSTTL Load or 15pF HCMOS Load
VIH :No Connection
Enables Output
VIH :≥2.2VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
ECLIPTEK CORP.
OSCILLATOR
EC11
14 pin DIP
800-ECLIPTEK www.ecliptek.com for latest revision
VOLTAGE
5.0V
CLASS
REV.DATE
OS04
08/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC11 00 ET T TS - 60.000M - G
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Full Size Gull Wing (See Page 132)
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Max.(Standard), 45=±50ppm Max.
25=±25ppm Max., 20=±20ppm Max.
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
FREQUENCY
K=kHz, M=MHz
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
OUTPUT CONTROL FUNCTION
Blank=None (No Connection on Pin 1)
TS=Tri-State Enable High
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MARKING SPECIFICATIONS
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Line 1: ECLIPTEK
Line 2: EC11 TS
Output Control Function
Blank = None (No Connection on Pin 1)
TS = Tri-State Enable High
Series Designator
Line 3: XX.XXX M
M=MHz, K=kHz
Frequency (5 Digits Maximum + Decimal)
Pin 1: No Connect or Tri-State
Pin 7: Case Ground
Pin 8: Output
Pin 14: Supply Voltage
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Line 4: XX Y ZZ
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
Characteristic
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC11
14 pin DIP
5.0V
OS04
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
EC11 Series
EC11
• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 5.0V supply voltage
• 8 pin DIP package
• Stability to ±20ppm
• Custom lead length,
gull wing options available
H 5.6
L 13.2
W 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
0.250MHz to 106.250MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
Supply Voltage (VDD)
5.0VDC ±10%
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
250.000kHz to 24.000MHz
45mA Maximum
24.001MHz to 50.000MHz
55mA Maximum
50.001MHz to 66.667MHz
65mA Maximum
66.668MHz to 106.250MHz
85mA Maximum
Inclusive of Operating Temperature Range, Supply Voltage,
±100ppm, ±50ppm, ±25ppm, or
and Load
±20ppm Max. (0°C to 70°C Only)
w/TTL Load
2.4VDC Minimum
w/HCMOS Load
VDD-0.5VDC Minimum
w/TTL Load
0.4VDC Maximum
w/HCMOS Load
0.5VDC Maximum
0.4VDC to 2.4VDC w/TTL Load; 20% to 80% of
6 nSeconds Maximum
Waveform w/HCMOS Load
Duty Cycle
Load Drive Capability
Tri-State Input Voltage
at 1.4VDC w/TTL Load; at 50% of Waveform w/HCMOS Load
50 ±10(%) (Standard)
at 1.4VDC w/TTL Load or w/HCMOS Load < 70.000MHz
50 ±5(%) (Optional)
at 50% of Waveform w/TTL Load or w/HCMOS Load > 70.000MHz
50 ±5(%) (Optional)
250.000kHz to 24.000MHz
10TTL Load or 50pF HCMOS Load
24.001MHz to 70.000MHz
10TTL Load or 15pF HCMOS Load
70.001MHz to 106.250MHz
10LSTTL Load or 15pF HCMOS Load
VIH :No Connection
Enables Output
VIH :≥2.2VDC
Enables Output
VIL :≤0.8VDC
Disables Output: High Impedance
Aging (at 25°C)
±5ppm / year Maximum
Start Up Time
10mSeconds Maximum
Period Jitter: Absolute
±100pSeconds Maximum
Period Jitter: One Sigma
±25pSeconds Maximum
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
ECLIPTEK CORP.
OSCILLATOR
EC11
8 pin DIP
5.0V
OS05
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
08/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC11 00 HS ET T TS - 60.000M - G TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Max.(Standard), 45=±50ppm Max.
25=±25ppm Max., 20=±20ppm Max.
PACKAGING OPTIONS
Blank=Bulk (Standard)
TR=Tape & Reel (only offered with
Half Size G and Half Size G2 Options)
PACKAGE
HS=Half Size 8 Pin DIP
AVAILABLE OPTIONS
Blank=None (Standard)
CLXXX=Custom Lead Length (See Page 133)
G=Half Size Gull Wing (See Page 132)
G2=Half Size Gull Wing (See Page 132)
OPERATING TEMP. RANGE
Blank=0°C to 70°C (Standard), ET=-40°C to 85°C
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
FREQUENCY
K=kHz, M=MHz
OUTPUT CONTROL FUNCTION
Blank=None (No Connection on Pin 1), TS=Tri-State Enable High
MECHANICAL DIMENSIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1 Locator for Gull Wing
(1) For “G” Option
(2) For “G2” Option
Ø
Pin 1: No Connect or Tri-State
Pin 4: Case Ground
Pin 5: Output
Pin 8: Supply Voltage
MARKING SPECIFICATIONS
Line 1: ECLIPTEK
Line 2: EC11 TS
Output Control Function
Blank = None (No Connection on Pin 1)
TS = Tri-State Enable High
Series Designator
700 Pieces Per Reel
Compliant to EIA-481A
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 3: XX.XXX M
M=MHz, K=kHz
Characteristic
Frequency (5 Digits Maximum + Decimal)
Line 4: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Note: Pin 1 shall be designated with a dot
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Lead Integrity
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC11
8 pin DIP
5.0V
OS05
08/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages