Ecliptek EC5350DV-12800M 4.5mmheight thru-hole sinewave tcxo Datasheet

Marketing Bulletin
DATE:
January 5, 2004
TO:
Affected Customers
FROM:
Mark Stoner
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the termination of the following Ecliptek series
effective November 11th, 2003:
Series
EC51
ES51
EC53
Description
5V 14 Pin DIP TCXO, HCMOS
5V 14 Pin DIP TCXO, Sinewave
3.3V 14 Pin DIP TCXO, HCMOS
Recommended Replacement
EB51F3
ES51F3
EB52F3
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after February 1st, 2004, with
deliveries to conclude by July 1st 2004.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
STANDARD SPECIFICATIONS
Frequency Range:
Frequency Stability:
vs. Input Voltage (±5%)
vs. Load (±2kΩ//±2pF)
vs. Aging (at 25°C)
Operating/Storage Temp. Range
Supply Voltage
Input Current
Output Voltage
Load Drive Capabillity
Internal Trim (Top of Can)
Pin 1 Control Voltage
Blank
V
Frequency Deviation
Typical Phase Noise
9.600MHz to 35.000MHz
See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
±0.3ppm Maximum
±0.3ppm Maximum
±1ppm/year Maximum
See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC
5.0Vdc ±5%
1.5mA Max. ≤ 20.000MHz, 2.0mA Max. 20.001MHz to 29.999MHz, 3.0mA Max. ≥ 30.000MHz
1.0Vp-p Minimum
10kOhms // 10pF
±3ppm Minimum
OBSOLETE
No Connect (Pin 1 not present)
2.5Vdc ±2.0Vdc, Positive Transfer Charateristic
±5ppm Minimum over Control Voltage
-85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
-145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test:
Gross Leak Test:
Mechanical Shock:
Vibration:
Lead Integrity:
MIL-STD-883, Method
MIL-STD-883, Method
MIL-STD-202, Method
MIL-STD-883, Method
MIL-STD-883, Method
Solderability:
Temperature Cycling:
Resistance to Soldering Heat:
Resistance to Solvents:
1014, Condition A
1014, Condition C
213, Condition C
2007, Condition A
2004
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
TABLE 1: PART NUMBERING CODES
OPERATING
TEMPERATURE
FREQUENCY STABILITY
X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency.
Range
Code
0°C to +50°C
-10°C to +60°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-35°C to +80°C
-40°C to +85°C
A
B
C
D
E
F
G
Code
50
35
30
25
20
15
±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
Y
X
X
Y
Y
X
X
Y
X
X
MARKING GUIDE
(Line #1) ECLIPTEK
(Line #2) ES51 00 X Y
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Control Voltage 2.5Vdc ±2.0Vdc
Positive Transfer Characteristic
Operating Temperature
Code Per Table 1
Frequency Stability
Code Per Table 1
PART NUMBERING GUIDE
ES51 25 E V - 12.800M
(Line #3) XX.XXXM
Frequency
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Voltage Control
(Line #4) XX Y ZZ
Operating Temperature Range Code Per Table 1
Week of Year
Last Digit of Year
Ecliptek Manufacturing Code
Frequency Stability Code Per Table 1
∅3.5 ±0.5
4.5 ±0.3
ECLIPTEK
ES5100XY
XX.XXXM
XXYZZ
Frequency
5.0 ±1.0
NOTE: Marking shall conform to conditions
listed in TQC41-001-000.
4.0 ±0.3
11.7 ±0.5
1.2 +0/-0.5
SPECIFICATION CONTROL DRAWING
Ø0.50 ±0.05
18.3 ±0.5
Control
Voltage (1)
4.0 ±0.3
Drawing Number
Ground (2)
CSC06-020-000
2.5
±0.3
Title
4.5mm HEIGHT THRU-HOLE SINEWAVE TCXO
7.62 ±0.30
Output (3)
Supply
Voltage (4)
15.24 ±0.40
Revision
NOTE: Pin 1 is not present
when Control Voltage is
specified as a "No Connect"
ALL DIMENSIONS
IN MILLIMETERS
Effectivity Date
E
05-02-03
ECN Number
8396
Approved By
PAGE 1 OF 2
Date Released By
Date
STANDARD SPECIFICATIONS
9.600MHz to 35.000MHz
See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
±0.3ppm Maximum
±0.3ppm Maximum
±1ppm/year Maximum
See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC
5.0Vdc ±5%
30mA Maximum
2.4Vdc Min. w/TTL Load, VDD-0.5Vdc Min. w/HCMOS Load
0.4Vdc Max. w/TTL Load, 0.5Vdc Max. w/HCMOS Load
10nSec (0.4Vdc to 2.4Vdc w/TTL Load, 20% to 80% of waveform w/HCMOS Load)
50% ±10% (@1.4Vdc w/TTL Load, @50% of waveform w/HCMOS Load)
10TTL Load or 15pF HCMOS Load Maximum
±3ppm Minimum
Frequency Range:
Frequency Stability:
vs. Input Voltage (±5%)
vs. Load (±2pF)
vs. Aging (at 25°C)
Operating/Storage Temp. Range
Supply Voltage
Input Current
Output Voltage Logic High
Output Voltage Logic Low
Rise/Fall Time
Duty Cycle
Load Drive Capabillity
Internal Trim (Top of Can)
Pin 1 Control Voltage
Blank
V
Frequency Deviation
Typical Phase Noise
OBSOLETE
No Connect (Pin 1 not present)
2.5Vdc ±2.0Vdc, Positive Transfer Charateristic
±5ppm Minimum over Control Voltage
-85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
-145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test:
Gross Leak Test:
Mechanical Shock:
Vibration:
Lead Integrity:
MIL-STD-883, Method
MIL-STD-883, Method
MIL-STD-202, Method
MIL-STD-883, Method
MIL-STD-883, Method
1014, Condition A
1014, Condition C
213, Condition C
2007, Condition A
2004
Solderability:
Temperature Cycling:
Resistance to Soldering Heat:
Resistance to Solvents:
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
TABLE 1: PART NUMBERING CODES
OPERATING
TEMPERATURE
FREQUENCY STABILITY
X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency.
Range
Code
0°C to +50°C
-10°C to +60°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-35°C to +80°C
-40°C to +85°C
A
B
C
D
E
F
G
50
35
30
25
20
15
Code
±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
X
X
Y
Y
X
X
Y
X
X
MARKING GUIDE
(Line #1) ECLIPTEK
(Line #2) EC51 00 X Y
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Control Voltage 2.5Vdc ±2.0Vdc
Positive Transfer Characteristic
Operating Temperature
Code Per Table 1
Frequency Stability
Code Per Table 1
PART NUMBERING GUIDE
EC51 25 E V - 12.800M
Frequency
Frequency
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Voltage Control
(Line #4) XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Code
Operating Temperature Range Code Per Table 1
Frequency Stability Code Per Table 1
∅3.5 ±0.5
ECLIPTEK
EC5100XY
XX.XXXM
XXYZZ
(Line #3) XX.XXXM
4.5 ±0.3
5.0 ±1.0
NOTE: Marking shall conform to conditions
listed in TQC41-001-000.
4.0 ±0.3
11.7 ±0.5
1.2 +0/-0.5
SPECIFICATION CONTROL DRAWING
Ø0.50 ±0.05
Drawing Number
CSC06-010-000
18.3 ±0.5
Control
Voltage (1)
4.0 ±0.3
Ground (2)
Title
2.5
±0.3
4.5mm HEIGHT THRU-HOLE HCMOS/TTL TCXO
Revision
7.62 ±0.30
Output (3)
Supply
Voltage (4)
15.24 ±0.40
Effectivity Date
NOTE: Pin 1 is not present
when Control Voltage is
specified as a "No Connect" ECN Number
ALL DIMENSIONS
IN MILLIMETERS
E
05-02-03
8395
PAGE 1 OF 2
Approved By
Date Released By
Date
STANDARD SPECIFICATIONS
9.600MHz to 35.000MHz
See Table 1 for Maximum Values (Inclusive of Operating Temperature Range)
±0.3ppm Maximum
±0.3ppm Maximum
±1ppm/year Maximum
See Table 1 for Operating Temperature Range / Storage -40ºC to +85ºC
3.3Vdc ±5%
10mA Maximum < 20.000MHz, 20mA Maximum > 20.000MHz
2.7Vdc Minimum
0.5Vdc Maximum
10nSec. Maximum (20% to 80% of waveform)
50% ±10% (@50% of waveform)
15pF HCMOS Load Maximum
±3ppm Minimum
Frequency Range:
Frequency Stability:
vs. Input Voltage (±5%)
vs. Load (±2pF)
vs. Aging (at 25°C)
Operating/Storage Temp. Range
Supply Voltage
Input Current
Output Voltage Logic High
Output Voltage Logic Low
Rise/Fall Time
Duty Cycle
Load Drive Capabillity
Internal Trim (Top of Can)
Pin 1 Control Voltage
Blank
V
Frequency Deviation
Typical Phase Noise
OBSOLETE
No Connect (Pin 1 not present)
1.65Vdc ±1.35Vdc, Positive Transfer Charateristic
±5ppm Minimum over Control Voltage
-85dBc/Hz at 10Hz Offset, -115dBc/Hz at 100Hz Offset, -135dBc/Hz at 1kHz Offset, -140dBc/Hz at 10kHz Offset,
-145dBc/Hz at 100kHz Offset, -150dBc/Hz at 1MHz Offset
ENVIRONMENTAL & MECHANICAL
Fine Leak Test:
Gross Leak Test:
Mechanical Shock:
Vibration:
Lead Integrity:
MIL-STD-883, Method
MIL-STD-883, Method
MIL-STD-202, Method
MIL-STD-883, Method
MIL-STD-883, Method
1014, Condition A
1014, Condition C
213, Condition C
2007, Condition A
2004
Solderability:
Temperature Cycling:
Resistance to Soldering Heat:
Resistance to Solvents:
TABLE 1: PART NUMBERING CODES
OPERATING
TEMPERATURE
MARKING GUIDE
FREQUENCY STABILITY
X Denotes availability from 9.600MHz to 25.000MHz
Y Denotes availability for any valid frequency.
Range
Code
0°C to +50°C
-10°C to +60°C
-20°C to +70°C
-30°C to +60°C
-30°C to +75°C
-35°C to +80°C
-40°C to +85°C
A
B
C
D
E
F
G
50
35
30
25
20
15
Code
±1.5ppm ±2.0ppm ±2.5ppm ±3.0ppm ±3.5ppm ±5.0ppm Range
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
X
Y
Y
Y
Y
X
Y
Y
Y
X
X
Y
Y
X
X
Y
X
X
(Line #1) ECLIPTEK
(Line #2) EC53 00 X Y
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Control Voltage 1.65Vdc ±1.35Vdc
Positive Transfer Characteristic
Operating Temperature
Code Per Table 1
Frequency Stability
Code Per Table 1
PART NUMBERING GUIDE
(Line #3) XX.XXXM
EC53 25 E V - 12.800M
Frequency
Frequency
Pin 1 Connection
Blank = No Connect (pin 1 not present)
V = Voltage Control
ECLIPTEK
EC5300XY
XX.XXXM
XXYZZ
(Line #4) XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Code (Per TEN02-001-000)
Operating Temperature Range Code Per Table 1
Frequency Stability Code Per Table 1
∅3.5 ±0.5
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
4.5 ±0.3
5.0 ±1.0
NOTE: Marking shall conform to conditions
listed in TQC41-001-000.
4.0 ±0.3
11.7 ±0.5
1.2 +0/-0.5
SPECIFICATION CONTROL DRAWING
Ø0.50 ±0.05
Drawing Number
18.3 ±0.5
Control
Voltage (1)
4.0 ±0.3
CSC06-110-000
Ground (2)
7.62 ±0.30
Output (3)
Supply
Voltage (4)
15.24 ±0.40
CLASS/SUBCLASS: OS62
2.5
±0.3
Title
4.5mm THRU-HOLE 3.3Vdc HCMOS/TTL TCXO
NOTE: Pin 1 is not present Revision
when Control Voltage is
specified as a "No Connect"
ECN Number
ALL DIMENSIONS
IN MILLIMETERS
Effectivity Date
C
8400
Approved By
05-02-03
PAGE 1 OF 2
Date Released By
Date
Similar pages