Panasonic ECHU1H822X5 Stacked metallized pps film chip capacitor Datasheet

Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
■Features
• Small in size (minimum size 1.6 mm ✕ 0.8 mm)
• 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours
• For reflow soldering
• RoHS directive compliant
■Recommended Applications
• Time-constant
• Filtering
• Oscillation and resonance
■Explanation of Part Numbers
1
2
3
4
E
C
H
U
Product code
Dielectric &
construction
5
6
7
8
9
10
11
X
Rated voltage
Capacitance
Cap. Tol. Suffix
G ±2 %
J ±5 %
1C 16 VDC
1H 50 VDC
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
12
Tape width
Reel diameter ❈ Tape width 8 mm
and diameter
8 mm
5
size ø180 mm ø330 mm reel is
prepared.
12 mm
9
size ø330 mm
−55 ℃ to +125 ℃
16 VDC,50 VDC
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃)
Capacitance tolerance
0.00010 µF to 0.22 µF (E12)
±2 %(G), ±5 %(J)
Withstand voltage
Between terminals : Rated volt. (VDC)✕150 % 60 s
Dissipation factor (tan )
tanδ≦0.6 % (20 ℃, 1 kHz)
16 VDC:IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)
50 VDC:IR≧3000 MΩ (20 ℃, 50 VDC, 60 s)
Insulation resistance (IR)
Soldering conditions
Suffix
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
❈ Please consult us for flow soldering
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
■Construction
■Dimensions in mm (not to scale)
saize
code
L
W
H
e
g
K1
1.6
0.8
0.7
0.35
≧0.4
J1
J2
H1
2.0
2.0
3.2
1.25
1.25
1.6
0.9
1.1
0.9
0.45
0.45
0.65
≧0.6
≧0.6
≧1.0
H2
H3
3.2
3.2
1.6
1.6
1.1
1.5
0.65
0.65
≧1.0
≧1.0
G1
G2
G3
3.2
3.2
3.2
2.5
2.5
2.5
1.1
1.5
2.1
0.65
0.65
0.65
≧1.0
≧1.0
≧1.0
E1
E2
4.8
4.8
3.3
3.3
1.5
2.1
0.80
0.80
≧2.0
≧2.0
D1
D3
D4
6.0
6.0
6.0
4.1
4.1
4.1
1.9
2.5
2.8
0.80
0.80
0.80
≧2.0
≧2.0
≧2.0
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
− FC16 −
Plastic Film Capacitors
■Taping Specification for Automatic Mounting
Refer to the page of taping specifications
■Rating, Dimensions & Quantity/Reel
Rated volt. 16 VDC
Cap. (µF)
0.00010
0.00012
0.00015
0.00018
0.00022
0.00027
0.00033
0.00039
0.00047
0.00056
0.00068
0.00082
0.0010
0.0012
0.0015
0.0018
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
0.0068
0.0082
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
Part No.
ECHU1C101□X5
ECHU1C121□X5
ECHU1C151□X5
ECHU1C181□X5
ECHU1C221□X5
ECHU1C271□X5
ECHU1C331□X5
ECHU1C391□X5
ECHU1C471□X5
ECHU1C561□X5
ECHU1C681□X5
ECHU1C821□X5
ECHU1C102□X5
ECHU1C122□X5
ECHU1C152□X5
ECHU1C182□X5
ECHU1C222□X5
ECHU1C272□X5
ECHU1C332□X5
ECHU1C392□X5
ECHU1C472□X5
ECHU1C562□X5
ECHU1C682□X5
ECHU1C822□X5
ECHU1C103□X5
ECHU1C123□X5
ECHU1C153□X5
ECHU1C183□X5
ECHU1C223□X5
ECHU1C273□X5
ECHU1C333□X5
ECHU1C393□X5
ECHU1C473□X5
ECHU1C563□X5
ECHU1C683□X5
ECHU1C823□X5
ECHU1C104□X5
↑
Dimensions (mm)
L
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
W
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.5
2.5
2.5
2.5
H
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.9
0.9
0.9
0.9
0.9
1.1
1.1
0.9
0.9
0.9
0.9
1.1
1.1
1.5
1.5
1.5
1.5
2.1
2.1
Chip
●Capacitance tolerance : ± 2 % (G), ± 5 % (J)
Rated volt. 50 VDC
Size
Code
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
K1
J1
J1
J1
J1
J1
J2
J2
H1
H1
H1
H1
H2
H2
H3
H3
G2
G2
G3
G3
Q'ty
Part No.
ECHU1H101□X5
ECHU1H121□X5
ECHU1H151□X5
ECHU1H181□X5
ECHU1H221□X5
ECHU1H271□X5
ECHU1H331□X5
ECHU1H391□X5
4000 ECHU1H471□X5
ECHU1H561□X5
ECHU1H681□X5
ECHU1H821□X5
ECHU1H102□X5
ECHU1H122□X5
ECHU1H152□X5
ECHU1H182□X5
ECHU1H222□X5
ECHU1H272□X5
ECHU1H332□X5
ECHU1H392□X5
ECHU1H472□X5
ECHU1H562□X5
ECHU1H682□X5
ECHU1H822□X5
3000 ECHU1H103□X5
ECHU1H123□X5
ECHU1H153□X5
ECHU1H183□X5
ECHU1H223□X5
ECHU1H273□X5
ECHU1H333□X5
ECHU1H393□X5
ECHU1H473□X9
2000 ECHU1H563□X9
ECHU1H683□X9
ECHU1H823□X9
ECHU1H104□X9
ECHU1H124□X9
ECHU1H154□X9
ECHU1H184□X9
ECHU1H224□X9
↑
Dimensions (mm)
L
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4.8
4.8
4.8
4.8
4.8
6.0
6.0
6.0
6.0
W
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.6
1.6
1.6
1.6
1.6
1.6
1.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.3
3.3
3.3
3.3
3.3
4.1
4.1
4.1
4.1
H
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.1
1.1
1.1
1.1
1.5
1.5
1.5
2.1
2.1
1.5
1.5
1.5
2.1
2.1
1.9
1.9
2.5
2.8
Size
Code
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
J1
H1
H1
H1
H1
H1
H2
H2
G1
G1
G2
G2
G2
G3
G3
E1
E1
E1
E2
E2
D1
D1
D3
D4
Cap. tol. code
■Recommended for Land Dimensions (mm)
Land dimensions
Size
Code
Reflow soldering
A
K1
J1,J2
H1,H2,H3
G1,G2,G3
E1,E2
D1,D3,D4
0.6
0.8
1.8
1.8
3.0
4.0
B
C
2.0
2.4
3.6
3.6
5.6
7.0
0.7
1.1
1.4
2.3
3.0
3.8
❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when
“Recommender for Land dimensions” is adopted.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
− FC17 −
Q'ty
3000
2000
3000
2000
ECHU (X) Type
(Stacked Metallized Film)
DC10V series
Electrical Characteristics <Typical Data >
Temperature Characteristics
at 1kHz
10
5
27nF
10nF
0
3.3nF
-5
Capacitance change(%)
Capacitance change(%)
10
Frequency Characteristics
27nF
5
10nF
0
3.3nF
-5
-10
-10
-60 -40 -20
0
1
20 40 60 80 100 120 140
10
Temperature(Degree C)
4
27nF
2
10nF
3.3nF
0
0
Dissipation factor(%)
Dissipation factor(%)
6
6
4
27nF
2
3.3nF
10nF
1
10
100
1000
at DC10V
100000
1.E+11
3.3nF
10nF
27nF
1.E+10
1.E+09
1.E+08
1.E+07
10000
1000
100
10
3.3nF
10nF
27nF
1
1.E+06
-60 -40 -20 0
10000
Frequency(kHz)
Impedance(ohm)
Insulation resistance(ohm)
8
0
20 40 60 80 100 120 140
Temperature(Degree C)
1.E+12
10000
10
8
-60 -40 -20
1000
Frequency(kHz)
at 1kHz
10
100
20 40 60 80 100 120 140
Temperature(Degree C)
0.1
1
10
100
1000
Frequency(kHz)
10000
ECHU (X) Type
(Stacked Metallized Film)
DC10V series
Applicable Specifications
Permissible Current
Permissible Voltage
(at sine wave)
100
0.5
Effective value (Vrms)
0.3
27nF
0.2
22nF
18nF
15nF
12nF
0.1
From
3.3nF
10
to 27nF
10nF
8.2nF
6.8nF
5.6nF 4.7nF
3.9nF 3.3nF
0.0
1
10
100
1
1000
1
10
Frequency(kHz)
100
1000
Frequency(kHz)
Pulse Handling Capability (dv/dt)
Voltage Derating by Temperature
(Max 10000cycles)
20
Rating Capacitance
Voltage
Value(uF)
0.0033
DC
10V
dV/dt Current(0-P)
code
(A)
(V/us)
332
47
0.16
0.0039
392
44
0.17
0.0047
472
40
0.19
0.0056
562
37
0.21
0.0068
682
34
0.23
0.0082
822
31
0.25
0.01
103
28
0.28
0.012
123
26
0.31
0.015
153
24
0.36
0.018
183
22
0.40
0.022
223
20
0.44
0.027
273
18
0.49
16
DC Rated Voltage (V)
Effective value (Arms)
0.4
12
From
3.3nF
to 27nF
8
4
0
-60 -40 -20
0
20 40 60 80 100 120 140
Surface Temperature of Capacitor(DegreeC)
* Please consult Panasonic if your condition exceeds the above
*Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.
ECHU (X) Type
(Stacked Metallized Film)
DC16V series
Electrical Characteristics < Typical Data >
Temperature Characteristics
Frequency Characteristics
at 1kHz
10
10
5
0.010uF
0.10uF
0
-5
Capacitance change(%)
Capacitance change(%)
0.10uF
0.010uF
5
0
3300pF
-5
-10
-10
1
-60 -40 -20 0 20 40 60 80 100 120 140
10
Temperature(Degree C)
at 1kHz
8
6
4
2
0.010uF
0.10uF
10000
2
0.10uF
0.010uF
1
3300pF
0
0
-60 -40 -20 0 20 40 60 80 100120 140
1
Temperature(Degree C)
1.E+12
10
100
1000
10000
10000
100000
Frequency (kHz)
at DC 10V
10000
0.010uF
1.E+11
1.E+10
1000
0.10uF
1.E+09
1.E+08
Impedance(ohm)
Insuration resistance(ohm)
1000
3
Dissipation factor(%)
Dissipation factor(%)
10
100
Frequency (kHz)
0.10uF
1
0.1
1.E+06
0.01
10
Temperature(Degree C)
0.010uF
10
1.E+07
-60 -40 -20 0 20 40 60 80 100120 140
3300pF
100
100
1000
Frequency (kHz)
ECHU (X) Type DC16V series
(Stacked Metallized Film)
Applicable Specifications
Permissible Voltage
Permissible Current
(at sine wave)
100
2.0
0.10 uF
0.082 uF
0.068 uF
Effective value (A)
Effective value (A)
1.5
0.056 uF
1.0
0.047 uF
0.039 uF
0.033 uF
0.027 uF
From 3300 pF to 0.039 uF
10
0.022 uF
0.018 uF
0.5
0.0
10
100
Frequency (kHz)
0.015 uF
0.012 uF
0.010 uF
8200 pF
6800 pF
5600 pF
4700 pF
3900 pF
3300 pF
From 0.047 uF to 0.10 uF
1
10
1000
100
1000
Frequency (kHz)
Pulse Handling Capability (dv/dt)
(Max 10000cycles)
DC
16V
Capacitance
Value(uF)
Code
dv/dt(V/us)
Current(0-P )
(A)
0.0033
332
86
0.28
0.0039
392
80
0.31
0.0047
472
74
0.35
0.0056
562
68
0.38
0.0068
682
62
0.42
0.0082
822
58
0.48
0.010
103
52
0.52
0.012
123
48
0.58
0.015
153
43
0.65
0.018
183
40
0.72
0.022
223
37
0.81
0.027
273
33
0.89
0.033
333
31
1.02
0.039
393
28
1.09
0.047
473
26
1.22
0.056
563
24
1.34
0.068
683
22
1.50
0.082
823
20
1.64
0.10
104
19
1.90
Voltage Derating by Temperature
20
DC Rated Voltage (V)
Rating
Voltage
15
10
5
0
-60 -40 -20 0 20 40 60 80 100 120 140
Surface Temperature of Capacitor(DegreeC)
* Please consult Panasonic if your condition exceeds the above spec.
*Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P ) value is calculated using nominal capacitance.
ECHU (X) Type
DC50V series (Stacked Metallized Film)
Electrical Characteristics <Typical Data >
Temperature Characteristics
at 1kHz
10
Capacitance change(%)
Capacitance change(%)
10
Frequency Characteristics
100pF
1000pF
0.01uF
0.1uF
0.22uF
5
0
-5
-10
0.1uF
0.22uF
5
0.039uF
1000pF
0
100pF
-5
-10
-60 -40 -20
0
20 40 60 80 100 120 140
10
100
Temperature(Degree C)
10at
1000
10000
Frequency(kHz)
1kHz
3
Dissipation factor(%)
Dissipation factor(%)
0.1uF
8
6
100pF
1000pF
0.01uF
0.1uF
0.22uF
4
2
0
-60 -40 -20
0
1000pF
1
100pF
0
20 40 60 80 100 120 140
10
100
at DC50V
100pF
0.01uF
1.E+10
0.1uF
0.22uF
1.E+09
10000
10000
100pF
1000pF
1.E+11
1000
Frequency(kHz)
1.E+08
1.E+07
1.E+06
Impedance(ohm)
Insulation resistance(ohm)
Temperature(Degree C)
1.E+12
0.039uF
0.22uF
2
1000
1000pF
100
10
1
0.039uF
0.1uF
0.22uF
0.1
0.01
-60 -40 -20 0
20 40 60 80 100 120 140
Temperature(Degree C)
100
1000
10000
Frequency(kHz)
100000
ECHU (X) Type
DC50V series (Stacked Metallized Film)
Applicable Specifications
Permissible Current
Permissible Current
1.2
0.12
0.10
1.0
2700pF
Effective value (Arms)
Effective value (Arms)
0.039uF
2200pF
0.08
1800pF
0.06
1500pF
1200pF
0.04
1000pF
820pF
680pF
0.033uF
0.8
0.027uF
0.022uF
0.018uF
0.6
0.015uF
0.012uF
0.4
0.01uF
8200pF
6800pF
5600pF
4700pF
3900pF
3300pF
0.2
0.02
560pF
〜100pF
0.0
0.00
10
100
10
1000
Permissible Current
1000
Permissible Voltage
2.0
(at sine wave)
100
From 100pF to 2700pF
1.5
0.22uF
0.18uF
0.15uF
0.12uF
0.1uF
0.082uF
0.068uF
0.056uF
0.047uF
1.0
0.5
Effective value
Effective value (Arms)
100
Frequency(kHz)
Frequency(kHz)
10
0.0
10
100
1
10
Frequency(kHz)
100
1000
Frequency(kHz)
*Please consult Panasonic if your condition exceeds the above
*Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) vlue is calculated using nominal capacitance.
ECHU (X) Type
DC50V series (Stacked Metallized Film)
Applicable Specifications
Permissible Voltage
Permissible Voltage
(at sine wave)
100
(at sine wave)
100
From 0.015uF
to 0.039uF
10
1
Effective value
Effective value
From 3300pF to 0.012uF
0.047uF
0.056uF
0.068uF
0.082uF
0.10uF
0.12uF
0.15uF
0.18uF
0.22uF
10
1
10
100
1000
10
100
Frequency(kHz)
Frequency(kHz)
Pulse Handling Capability (dv/dt)
(Max 10000cycles)
Rating Capacitance
dV/dt
code
Voltage Value(uF)
(V/us)
DC
50V
Current
(Ao-p)
Pulse Handling Capability (dv/dt)
(Max 10000cycles)
Rating Capacitance
dV/dt
code
Voltage Value(uF)
(V/us)
Current
(Ao-p)
0.00010
101
1100
0.11
0.0033
332
240
0.79
0.00012
121
1050
0.13
0.0039
392
220
0.86
0.00015
151
940
0.14
0.0047
472
200
0.94
0.00018
181
890
0.16
0.0056
562
190
1.06
0.00022
221
800
0.18
0.0068
682
170
1.16
0.00027
271
730
0.20
0.0082
822
160
1.31
0.00033
331
690
0.23
0.010
103
145
1.45
0.00039
391
610
0.24
0.012
123
135
1.62
0.00047
471
580
0.27
0.015
153
120
1.80
0.00056
561
520
0.29
0.018
183
110
1.98
0.00068
681
480
0.33
0.022
223
100
2.20
0.00082
821
440
0.36
0.027
273
94
2.54
0.0010
102
400
0.40
0.033
333
86
2.84
0.0012
122
370
0.44
0.039
393
78
3.04
0.0015
152
340
0.51
0.0018
182
310
0.56
0.0022
222
270
0.59
0.0027
272
260
0.70
DC
50V
*Please consult Panasonic if your condition exceeds the above
*Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.
ECHU (X) Type
DC50V series (Stacked Metallized Film)
Applicable Specifications
Voltage Derating by Temperature
Pulse Handling Capability (dv/dt)
DC
50V
60
Current
(Ao-p)
0.047
473
72
3.38
0.056
563
68
3.81
0.068
683
62
4.22
0.082
823
56
4.59
0.10
104
52
5.20
0.12
124
48
5.76
0.15
154
44
6.60
0.18
184
40
7.20
0.22
224
36
7.92
From 100pF to 0.1uF
50
DC Rated Voltage (V)
(Max 10000cycles)
Rating Capacitance
dV/dt
code
Voltage
Value(uF)
(V/us)
40
From 0.12uF to 0.22uF
30
20
10
0
-60 -40 -20 0
20 40 60 80 100 120 140
Surface Temperature of Capacitor(DegreeC)
*Please consult Panasonic if your condition exceeds the above
*Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage.
*The current(0-P) value is calculated using nominal capacitance.
Similar pages