GE EDF1AM Miniature glass passivated fast efficient bridge rectifier Datasheet

EDF1AM THRU EDF1DM
MINIATURE GLASS PASSIVATED FAST EFFICIENT BRIDGE RECTIFIER
Reverse Voltage - 50 to 200 Volts
FEATURES
Case Style DFM
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ This series is UL listed under Recognized Component Index,
file number E54214
♦ Glass passivated chip junctions
♦ High forward surge current capability
♦ Ideal for printed circuit boards
♦ Superfast recovery times for high efficiency
♦ High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
0.255 (6.5) 0.315 (8.00)
0.245 (6.2) 0.285 (7.24)
0.335 (8.51)
0.320 (8.12)
0.130 (3.3)
0.120 (3.05)
Forward Current - 1.0 Ampere
0.080 (2.03)
0.050 (1.27)
0.045 (1.14)
0.035 (0.89)
0.185 (4.69)
0.150 (3.81)
0.023 (0.58)
0.018 (0.46)
0.075 (1.90)
0.055 (1.39)
0.205 (5.2)
0.195 (5.0)
MECHANICAL DATA
0.013 (3.3)
0.0086 (0.22)
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.04 ounce, 1.0 gram
0.350 (8.9)
0.300 (7.6)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
EDF1AM
EDF1BM
EDF1CM
EDF1DM
UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
Volts
Maximum RMS voltage
VRMS
35
70
106
140
Volts
Maximum DC blocking voltage
VDC
50
100
150
200
Volts
Maximum average forward output
rectified current at TA=40°C
I(AV)
1.0
Amp
Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C
IFSM
50.0
Amps
Rating for fusing (t < 8.3ms)
I2t
10.0
A2sec
Maximum instantaneous forward voltage drop
per leg at 1.0A
VF
1.05
Volts
Maximum reverse current
at rated DC blocking voltage
IR
5.0
1.0
µA
mA
Maximum reverse recovery time at (NOTE 1)
trr
50.0
ns
Typical thermal resistance per leg (NOTE 2)
RΘJA
RΘJL
38.0
12.0
°C/W
TJ, TSTG
-55 to +150
°C
TA=25°C
TA=125°C
Operating junction and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.51 x 0.51" (13 x 13mm) copper pads
7/28/98
RATINGS AND CHARACTERISTICS CURVES EDF1AM THRU EDF1DM
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
60
1.0
60 HZ RESISTIVE OR INDUCTIVE LOAD
P.C.B. MOUNTED ON
0.51 x 0.51” (13 x 13mm)
COPPER PADS WITH
0.06” (1.5mm) LEAD LENGTH
0.75
0.5
CAPACITIVE
LOADS
Ipk / IAV=5.0
Ipk / IAV=10
Ipk / IAV=20
0.25
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
FIG. 1 - DERATING CURVES OUTPUT RECTIFIED
CURRENT
50
40
30
40
60
80
100
120
140
160
1.0 CYCLE
20
10
0
0
20
SINGLE SINE-WAVE
(JEDEC Method)
TJ=150°C
100
10
1
NUMBER OF CYCLES AT 60Hz
AMBIENT TEMPERATURE, °C
FIG. 4 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
FIG. 3 - TYPICAL FORWARD CHARACTERISTICS
PER LEG
1,000
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
10
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
0.1
0.01
0.4
0.6
0.8
1.0
1.2
JUNCTION CAPACITANCE, pF
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
15
10
5
1
10
REVERSE VOLTAGE, VOLTS
TJ=25°C
0
20
0
0.1
1
0.1
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
PER LEG
25
10
1.4
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
30
TJ=125°C
100
100
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100
Similar pages