Rectron EFM206L Surface mount glass passivated super fast silicon rectifier voltage range 50 to 600 volts current 2.0 ampere Datasheet

EFM201L
THRU
EFM207L
SURFACE MOUNT GLASS PASSIVATED
SUPER FAST SILICON RECTIFIER
VOLTAGE RANGE 50 to 600 Volts CURRENT 2.0 Ampere
FEATURES
*
*
*
*
*
*
Glass passivated device
Ideal for surface mounted applications
Low leakage current
Metallurgically bonded construction
Mounting position: Any
Weight: 0.098 gram
SMBL
MECHANICAL DATA
* Epoxy : Device has UL flammability classification 94V-0
0.083 (2.11)
0.077 (1.96)
0.155 (3.94)
0.130 (3.30)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.085 (2.15)
0.061 (1.55)
0.060 (1.52)
0.030 (0.76)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0.008 (0.203)
0.004 (0.102)
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
0.220 (5.59)
0.205 (5.21)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
RATINGS
SYMBOL
EFM201L EFM202L EFM203L EFM204L EFM205L EFM206L EFM207L
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
150
200
300
400
600
Volts
Maximum RMS Voltage
VRMS
35
70
105
140
210
280
420
Volts
VDC
50
100
150
200
300
400
600
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TA = 55oC
IO
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 4)
Typical Junction Capacitance (Note 2)
Operating and Storage Temperature Range
2.0
IFSM
Amps
75
Amps
RqJA
75
75
RqJL
20
25
CJ
30
0
20
C/W
pF
T J, TSTG
-55 to + 150
SYMBOL
EFM201L EFM202L EFM203L EFM204L EFM205L EFM206L EFM207L
0
C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 2.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
VF
@TA = 25oC
@TA = 100oC
Maximum Reverse Recovery Time (Note 1)
NOTES :
1. Reverse Re covery Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts
3. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
4. Thermal Resistance : Mounted on PCB.
0.95
1.25
5.0
IR
trr
1.50
Volts
mAmps
100
35
UNITS
50
nSec
2006-12
RATING AND CHARACTERISTICS CURVES ( EFM201L THRU EFM207L )
50 W
NONINDUCTIVE
(+)
25 Vdc
(approx)
(-)
(-)
D.U.T
PULSE
GENERATOR
(NOTE 2)
1
NONINDUCTIVE
trr
+0.5A
10 W
NONINDUCTIVE
OSCILLOSCOPE
(NOTE 1)
0
-0.25A
(+)
NOTES: 1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
-1.0A
2. Rise Time = 10ns max. Source Impedance =
50 ohms.
1cm
SET TIME BASE FOR 14/1 ns/cm
AVERAGE FORWARD CURRENT, (A)
2.5
2.0
1.5
1.0
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
0.5
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE, (OC)
FIG.2 TYPICAL FORWARD CURRENT
DERATING CURVE
175
INSTANTANEOUS REVERSE CURRENT, (uA)
FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
1000
100
TA = 100 OC
10
TA = 75 OC
TA = 25 OC
1.0
0.1
0
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 TYPICAL REVERSE
CHARACTERISTICS
140
PEAK FORWARD SURGE CURRENT, (A)
20
10
TJ = 25 OC
3.0
EFM207L
1.0
EFM205L~EFM206L
0.3
0.1
EFM201L~EFM204L
0.03
0.01
Pulse Width=300uS
1% Duty Cycle
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
200
8.3ms Single Half Sine-Wave
(JEDED Method)
100
50
30
20
10
1
5
INSTANTANEOUS FORWARD VOLTAGE, (V)
10
TJ = 25 OC
100
60
EFM201L~EFM204L
40
20
EFM205L~EFM207L
10
6
4
2
0.1 0.2
100
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
200
1
50
NUMBER OF CYCLES AT 60Hz
FIG.4 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
JUNCTION CAPACITANCE, (pF)
INSTANTANEOUS FORWARD CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( EFM201L THRU EFM207L )
0.4
1.0
2
4
10
20
40
REVERSE VOLTAGE, (V)
FIG.6 TYPICAL JUNCTION CAPACITANCE
100
Mounting Pad Layout
0.106 MAX.
(2.69 MAX.)
0.083MIN.
(2.10 MIN.)
0.050 MIN.
(1.27 MIN.)
0.220
(5.58) REF
Dimensions in inches and (millimeters)
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
Similar pages