Vishay EGL41A Surface mount glass passivated ultrafast rectifier Datasheet

BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
Surface Mount Glass Passivated Ultrafast Rectifier
FEATURES
• Cavity-free glass-passivated junction
• Ideal for automated placement
• Ultrafast reverse recovery time
• Low switching losses, high efficiency
• High forward surge capability
• Meets environmental standard MIL-S-19500
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 250 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
®
ed*
t
n
e
Pat
*Glass-plastic encapsulation
is covered by
Patent No. 3,996,602,
brazed-lead assembly to
Patent No. 3,930,306
DO-213AB (GL41)
TYPICAL APPLICATIONS
For use in high frequency rectification and
freewheeling application in switching mode converters
and inverters for consumer, computer, automotive and
telecommunication.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 400 V
IFSM
30 A
trr
50 ns
VF
1.0 V, 1.25 V
TJ max.
175 °C
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive
peak reverse voltage rating
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Fast efficient device: 1st band is Green
Polarity color bands (2nd Band)
BYM12-50
BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 UNIT
EGL41A
EGL41B
EGL41C
EGL41D
EGL41F
EGL41G
Gray
Red
Pink
Orange
Brown
Yellow
Maximum repetitive peak
reverse voltage
VRRM
50
100
150
200
300
400
V
Maximum RMS voltage
VRMS
35
70
105
140
210
280
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
V
Maximum average forward rectified
current at TT = 75 °C
IF(AV)
1.0
A
Peak forward surge current 8.3 ms
single half sine-wave superimposed
on rated load
IFSM
30
A
TJ, TSTG
- 65 to + 175
°C
Operating junction and storage
temperature range
Document Number: 88581
Revision: 27-Aug-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
TEST
CONDITIONS
PARAMETER
SYMBOL
BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400
EGL41A
EGL41B
EGL41C
EGL41D
EGL41F
EGL41G
UNIT
Max. instantaneous
forward voltage (1)
1.0 A
VF
Max. DC reverse
current at rated DC
blocking voltage (1)
TA = 25 °C
TA = 125 °C
IR
5.0
50
µA
Max. reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr
50
ns
Typical junction
capacitance
4.0 V, 1 MHz
CJ
1.0
1.25
20
V
14
pF
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum thermal resistance (1)(2)
BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400
EGL41A
EGL41B
EGL41C
RθJA
RθJT
EGL41D
EGL41F
EGL41G
60
30
UNIT
°C/W
Notes:
(1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
EGL41D-E3/96
0.114
96
1500
7" diameter plastic tape and reel
EGL41D-E3/97
0.114
97
5000
13" diameter plastic tape and reel
EGL41DHE3/96 (1)
0.114
96
1500
7" diameter plastic tape and reel
EGL41DHE3/97 (1)
0.114
97
5000
13" diameter plastic tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
30
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.0
0.5
Resistive or Inductive Load
0
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
25
20
15
10
5.0
0
0
25
50
75
100
125
150
175
1
10
100
Lead Temperature (°C)
Number of Cycles at 60 Hz
Figure 1. Maximum Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88581
Revision: 27-Aug-07
BYM12-50 thru BYM12-400, EGL41A thru EGL41G
Vishay General Semiconductor
70
Pulse Width = 300 µs
1 % Duty Cycle
TJ = 150 °C
10
1
TJ = 25 °C
0.1
50
40
30
20
10
EGL41A - EGL41D
EGL41F - EGL41G
0.01
0.2
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
60
Junction Capacitance (pF)
Instantaneous Forward Current (A)
50
EGL41A - EGL41D
EGL41F - EGL41G
0
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 5. Typical Junction Capacitance
100
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Leakage
Current (µA)
1000
100
TJ = 150 °C
10
TJ = 100 °C
1
0.1
TJ = 25 °C
20
40
60
80
1
0.1
0.01
0.01
0
10
100
0.1
1
10
100
t - Pulse Duration (s)
Percent of Rated Peak Reverse Voltage (%)
Figure 4. Typical Reverse Leakage Characteristics
Figure 6. Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB (GL41)
Mounting Pad Layout
Solderable Ends
1st Band
D2
0.022 (0.56)
0.018 (0.46)
0
D2 = D1 +
- 0.008 (0.20)
0.138 (3.5)
MAX.
D1 =
0.105
0.095
(2.67)
(2.41)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
0.118 (3.0)
MIN.
0.049 (1.25)
MIN.
0.238 (6.0)
REF.
1st Band Denotes Type and Positive End (Cathode)
Document Number: 88581
Revision: 27-Aug-07
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages