Everlight EHP-5393/UY01-P01 High power lamp Datasheet

Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Features
․Popular 10mm package.
․View angle:25° .
․High light flux output
․Soldering methods: Dip soldering.
․Optical efficiency: 42 lm/W
․Thermal resistance (junction to leadframe): 13K/W
․The product itself will remain within RoHS compliant version.
․ESD-withstand voltage: up to 4KV
Descriptions
․The series is specially designed for applications
requiring higher brightness.
․The LED lamps are available with different
colors, intensities, epoxy colors, etc.
Applications
․Flashlight
․Sunshine light.
․Advertising Signs.
․Back lighting.
Device Selection Guide
LED Part No.
EHP5393/UY01-P01
Chip
Material
Emitted Color
AlGaInP
Brilliant Yellow
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 1 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Package Dimensions
.30
±
45
.2
1
10±0.3
31.
in
M
2
.0
±
2
3.
0
±
88
.3
51
n.i
M
.2
0
±
5
.1
.20
±
5.
1
1
2
.01
.n
i
M
1±0.2
1 Anode
1±0.2
2 Cathode
10±0.3
Notes:
․Other dimensions are in millimeters, tolerance is 0.25mm except being specified.
․Protruded resin under flange is 1.5mm Max LED.
․Bare copper alloy is exposed at tie-bar portion after cutting.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 2 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Absolute Maximum Rating (Ta=25℃
℃)
Parameter
Forward Current
Symbol
IF
Absolute Maximum Rating
385
Unit
mA
Thermal resistance (junction to
leadframe)
Rth(j-l)
13
K/W
Operating Temperature
Storage Temperature
Electrostatic Discharge
Topr
Tstg
ESD
-40 ~ +85
-40 ~ +100
4K
℃
℃
V
Soldering Temperature
Tsol
260 ±5
℃
Power Dissipation
Pd
1.3
Reverse Voltage
Zener Reverse Current
Notes: Soldering time≦5 seconds.
VR
Iz
5
100
W
V
mA
Electro-Optical Characteristics (Ta=25℃
℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Flux
Flux
27
35
52
lm
Peak Wavelength
λp
--
591
--
nm
Dominant Wavelength
λd
584
589
596
nm
Viewing Angle
2θ1/2
--
25
--
deg
Forward Voltage
VF
2.0
2.4
3.0
V
Reverse Current
IR
--
--
10
μA
VR=5V
Zener Reverse Voltage
Vz
5.2
--
--
V
Iz=5mA
IF=350mA
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 3 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Rank Combination (IF=350mA)
Rank
Y2
Y3
Y4
Y5
Luminous Flux
27~33
33~39
39~45
45~52
*Measurement Uncertainty of Luminous Intensity: ±15%
Unit:lm
Forward Voltage Combination (V at 350mA)
Rank
2
3
4
5
6
Forward Voltage
2.0~2.2
2.2~2.4
2.4~2.6
2.6~2.8
2.8~3.0
*Measurement Uncertainty of Forward Voltage: ±0.1V
Unit:V
Color Combination ( at 350mA)
Rank
1
2
3
Dominant Wavelength
584~588
588~592
592~596
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
Unit:nm
*The quantity ratio of the ranks is decided by EVERLIGHT.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 4 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 5 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Packing Quantity Specification
1.200PCS/1Bag,3Bags/1Box
2.10Boxes/1Carton
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
EVERLIGHT
CPN:
P/N:
RoHS
EHP-5393/UY01-P01
QTY:
LOT NO:
CAT:
HUE:
REF:
CAT: Ranks of Total Flux and Forward Voltage
HUE: Ranks of Dominant Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
MADE IN TAIWAN
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 6 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises
to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through
the zener branch to keep the voltage at exactly Vz.
5. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 7 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Technical Data Sheet
High Power Lamp
EHP-5393/UY01-P01
6. If the emitter is operated, consider using metal heat sink with the lowest possible thermal
resistance. We do not recommend lighting the emitter for more than a few seconds without an
additional heat sink. For the thermal performance using a flat heat sink, allow an exposed
surface area of about 25mm2 at least.
7. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
400℃ Max. (30W
Max.)
Preheat temp.
100℃ Max. (60 sec Max.)
Soldering time
3 sec Max.
Bath temp.
265 Max.
Distance
3mm Min.(From solder
Bath time.
5 sec Max.
Distance
3mm Min.
joint to case)
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev: 1
Page: 8 of 8
Device Number : DLE-539-004
Prepared date:01-25-2007
Prepared by: Shaohsulu
Similar pages