ELCR80, e3 LOW CAPACITANCE RECTIFIER SCOTTSDALE DIVISION APPEARANCE The ELCR80 low capacitance rectifier is used in parallel with a low-capacitance transient voltage suppressor (TVS) such as the LCE6.5-170A series for T-18 unidirectional applications as shown in Figure 4. It is rated for 100 Amp forward surges to compliment this 1500 Watt TVS series and also provide a low capacitance and a low forward (VF) voltage with fast response time. The low capacitance rating of 100 pF when used in parallel to the LCE6.5-170A series will result in a total capacitance of 200 pF or less at zero volts for protecting higher frequency applications from inductive switching threats or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With their fast response time, they also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively. WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • APPLICATIONS / BENEFITS • Suppresses transient in forward direction up to 1500 Watts Peak Pulse Power @ 10/1000 µs Economical small plastic surface mount with robust axial subassembly package Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% temperature cycle -55oC to +125oC (10X) as well as surge (3X) and 24 hours HTRB with post test VZ & IR Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, or MSP prefixes respectively to part number, e.g. MXELCR80, MVELCR80, etc. Also available in surface mount package with part number HSMBJLCR80 (see separate data sheet) RoHS Compliant devices available by adding “e3” suffix • • • • • • Low-capacitance Rectifier to compliment the low capacitance TVS series for unidirectional applications Improved protection of low capacitance TVS Low Capacitance for data-line protection to 1 MHz Protection for aircraft fast data rate lines per select level waveforms in RTCA/DO-160D & ARINC 429 with bit rates of 100 kb/s (per ARINC 429, Part 1, par. 2.4.1.1) ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance in the forward direction for Class 1, 2, 3, and 4 Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance in the forward direction for Class 1, 2, and 3 MAXIMUM RATINGS • • • • MECHANICAL AND PACKAGING • o Forward Peak Pulse Current at 25 C: 100 Amps @ 10/1000 μs with repetition rate of 0.01% or less* o Steady State Power Dissipation: 5 Watts at TL = 25 C 3/8 inch from body Clamping Speed (0 volts to V(BR) Min.) less than 5 nanoseconds. o • • • • o Operating and Storage Temperature: -65 C to +150 C CASE: Void Free Transfer Molded Thermosetting Plastic epoxy body meeting UL94V-0 FINISH: Tin-Lead or RoHS Compliant annealed matte-Tin plating readily solderable per MIL-SD-750, method 2026 POLARITY: Cathode Marked with Band MARKING: Part number ELCR80 or ELCRe3 WEIGHT: 0.7 Grams (Approx.) MICROSEMI PART NUMBER WORKING PEAK REVERSE VOLTAGE REVERSE BREAKDOWN VOLTAGE @ I(BR) 1.0mA V(BR) VRWM ELCR80 ELCR80e3 *See Figure 3 Copyright © 2005 9-12-2005 REV 0 Volts 200 Volts Min. 220 REVERSE CURRENT @VRWM IR μA MAXIMUM FORWARD VOLTAGE @ IPP VF MAXIMUM PEAK PULSE CURRENT* RATING IPP Volts Amps 7.0 100 10 ELCR80, e3 ELECTRICAL CHARACTERISTICS @ 25oC MAXIMUM CAPACITANCE @ 0 Volts pF 100 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 ELCR80, e3 LOW CAPACITANCE RECTIFIER SCOTTSDALE DIVISION IPP – Peak Pulse Current - % IPP Peak Power (Single Pulse) % of Rated Power WWW . Microsemi .C OM GRAPHS Average Power o TL – Lead Temperature – C t – Time – ms FIGURE 2 FIGURE 3 SCHEMATIC APPLICATIONS A typical low capacitance TVS device configuration is shown in Figure 4 when used with a separate rectifier to maintain low capacitance. As shown, an additional low capacitance rectifier diode is used in parallel in the same polarity direction as the TVS. In applications where random high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode within the TVS and also provide a low voltage conducting direction. This added rectifier diode such as the ELCR80 is of similar low capacitance as the TVS and also has a higher reverse voltage rating than the TVS clamping voltage VC. The unidirectional configuration in Figure 4 will result in twice the capacitance of the LCE6.5 – 170A series of low capacitance TVSs that are rated at 100 pF maximum. This results in a total of 200 pF maximum in this parallel configuration since the ELCR80 is also the same capacitance value of 100 pF maximum. PACKAGE DIMENSIONS LCExxx (low capacitance TVS) ELCR80 Low Capacitance Rectifier Copyright © 2005 9-12-2005 REV 0 ELCR80, e3 FIGURE 4 Unidirectional configuration of Low Capacitance TVS (such as the LCE6.5-170A series) and a separate ELCR80 rectifier in parallel) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2