CHEMI-CON ELXH201VSN681MR30S Long life, overvoltage resistant design, 105â Datasheet

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105℃
LXH
Series
LXH
・Doesn't spark with DC over voltage
・Same case sizes of KMH
・Endurance with ripple current : 5,000 hours at 105℃
・Non solvent resistant type
・RoHS Compliant
Downsized
Longer life
KLG
Downsized
CHA P255
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-25 to +105℃
Rated Voltage
Capacitance Tolerance
Leakage Current
200 & 400Vdc
±20% (M)
I=0.02CV or 3mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Dissipation Factor
(tanδ)
0.15 max.
Low Temperature
Characteristics
Z(-25℃) /Z(+20℃)≦4
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
(at 120Hz)
(at 20℃, 1MHz)
50nH max.
When an excessive DC voltage is applied to the capacitors under the test conditions on next page, the vent shall operate and then the
capacitors shall become open-circuit without burning materials.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed
. the rated voltage) for 5,000 or 3,000 hours at 105℃
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±15% of the initial value
D.F. (tanδ)
≦150% of the initial specified value
Leakage current
≦The initial specified value
ESL
DC Overvoltage Test
Endurance
Shelf Life
◆DIMENSIONS [mm]
●Terminal
Code : VS (φ22 to φ35)
Negative mark
PC board pin-out
10
φD+1max.
Sleeve (PET : Brown)
*
4.0±0.5
L±2
Vent
2-φ2
*φD=35mm : 3.5±0.5mm
The standard design has no plastic disc.
◆PART NUMBERING SYSTEM
1
2
3
4
E LXH
5
6
7
8
9
10
VS N
11
12
13
14
M
15
16
17
18
S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 68µF:680, 1,500µF:152)
Dummy terminal code
Terminal code
Voltage code (ex. 200V:201, 400V:401)
Series code
Category
Please refer to "Product code guide (snap-in type)"
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency
Multipliers
Frequency (Hz)
200Vdc
400Vdc
50
0.81
0.77
120
1.00
1.00
300
1.17
1.16
1k
1.32
1.30
10k
1.45
1.41
50k
1.50
1.43
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
257
CAT. No. E1001N
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Long life, Overvoltage resistant design, 105℃
LXHSeries
◆STANDARD RATINGS
WV
(Vdc)
200
400
Cap
(µF)
Case size
φD×L(mm)
270
330
330
390
390
470
470
470
560
560
560
680
680
680
680
820
820
820
1,000
1,000
1,200
1,200
1,500
68
68
82
82
100
100
120
120
120
150
150
150
180
180
180
180
220
220
220
270
270
270
330
330
390
390
470
22× 25
22× 30
25.4× 25
22× 35
25.4× 30
22× 40
25.4× 30
30× 25
22× 45
25.4× 35
30× 30
22× 50
25.4× 40
30× 30
35× 25
25.4× 50
30× 35
35× 30
30× 45
35× 35
30× 50
35× 40
35× 45
22× 25
25.4× 20
22× 30
25.4× 25
22× 35
25.4× 30
22× 40
25.4× 30
30× 25
22× 45
25.4× 35
30× 30
22× 50
25.4× 40
30× 30
35× 25
25.4× 45
30× 35
35× 30
25.4× 50
30× 40
35× 30
30× 45
35× 35
30× 50
35× 40
35× 45
Rated ripple current
(Arms/105℃,120Hz)
tanδ
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
Part No.
5,000 hours
3,000 hours
0.45
0.62
0.62
0.67
0.66
0.72
0.72
0.77
0.80
0.78
0.81
0.89
0.89
0.89
0.88
1.05
1.03
1.05
1.18
1.18
1.33
1.36
1.57
0.26
0.24
0.30
0.30
0.34
0.34
0.37
0.37
0.39
0.42
0.43
0.43
0.49
0.48
0.47
0.48
0.55
0.54
0.55
0.62
0.62
0.59
0.71
0.69
0.80
0.79
0.89
0.87
1.20
1.21
1.31
1.28
1.40
1.41
1.50
1.56
1.53
1.57
1.74
1.74
1.74
1.72
2.04
2.00
2.04
2.30
2.30
2.60
2.65
3.08
0.51
0.46
0.58
0.58
0.66
0.66
0.72
0.72
0.76
0.82
0.84
0.84
0.95
0.94
0.92
0.94
1.07
1.06
1.08
1.21
1.21
1.15
1.39
1.35
1.55
1.54
1.74
ELXH201VSN271MP25S
ELXH201VSN331MP30S
ELXH201VSN331MQ25S
ELXH201VSN391MP35S
ELXH201VSN391MQ30S
ELXH201VSN471MP40S
ELXH201VSN471MQ30S
ELXH201VSN471MR25S
ELXH201VSN561MP45S
ELXH201VSN561MQ35S
ELXH201VSN561MR30S
ELXH201VSN681MP50S
ELXH201VSN681MQ40S
ELXH201VSN681MR30S
ELXH201VSN681MA25S
ELXH201VSN821MQ50S
ELXH201VSN821MR35S
ELXH201VSN821MA30S
ELXH201VSN102MR45S
ELXH201VSN102MA35S
ELXH201VSN122MR50S
ELXH201VSN122MA40S
ELXH201VSN152MA45S
ELXH401VSN680MP25S
ELXH401VSN680MQ20S
ELXH401VSN820MP30S
ELXH401VSN820MQ25S
ELXH401VSN101MP35S
ELXH401VSN101MQ30S
ELXH401VSN121MP40S
ELXH401VSN121MQ30S
ELXH401VSN121MR25S
ELXH401VSN151MP45S
ELXH401VSN151MQ35S
ELXH401VSN151MR30S
ELXH401VSN181MP50S
ELXH401VSN181MQ40S
ELXH401VSN181MR30S
ELXH401VSN181MA25S
ELXH401VSN221MQ45S
ELXH401VSN221MR35S
ELXH401VSN221MA30S
ELXH401VSN271MQ50S
ELXH401VSN271MR40S
ELXH401VSN271MA30S
ELXH401VSN331MR45S
ELXH401VSN331MA35S
ELXH401VSN391MR50S
ELXH401VSN391MA40S
ELXH401VSN471MA45S
◆DC OVERVOLTAGE TEST CONDITIONS
The vent will operate and the capacitor shall become an open circuit without burning materials
when the following test DC voltage is applied.
● Test
DC voltage
Rated Voltage
200Vdc
400Vdc
Capacitance
<330µF
330≦C<470µF
≧470µF
<100µF
100≦C<220µF
≧220µF
● Test
Current limit Test DC voltage
4A
5A
300/375Vdc
7A
2A
4A
500/600Vdc
7A
AC input
Circuit
SW
+
CX
-
Constant DC voltage/current power supply
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
258
CAT. No. E1001N
Similar pages