PROTEC EM8Q-100 Lcd emi filter/tvs array Datasheet

05217
EM8Q-100
Only One Name Means ProTek’Tion™
LCD emi filter/tvs array
Description
The EM8Q-100 is a QFN-16, 8 line low pass filter array with integrated TVS diodes. The EM8Q-100 is designed to
suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces such as LCD displays
and SMART phones.
With a desired cutoff frequency of 150MHz, the EM8Q-100 provides good EMI/RFI attenuation better than 25dB in
the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband
chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-4-2 (ESD)
and 61000-4-4 (EFT) immunity requirements.
QFN-16 package
Features
applications
•
•
•
•
•
•
•
•
•
•
•
•
Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
ESD Protection > 25 kilovolts
Bidirectional EMI Filtering/TVS Low Pass Filters
Low Insertion Loss: -3dB Roll-Off @ 150MHz
Protects up to 8 Data Lines
RoHS Compliant
REACH Compliant
SMART Phones
LCD Display Panel
Portable Electronics
SMART Cards
Mechanical characteristics
• Molded JEDEC QFN-16 Package
• Approximate Weight: 7 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 12mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
circuit diagram & pin configuration
R2
I/O 4
Pin 16
R3
Pin 15
L3 L4 L5
16 15 14
R4
1
L2
D2
R5
I/O 7
Pin 13
R6
Pin 6
I/O 8
Pin 12
R7
3 4
L1 L2
I/O 6
Pin 14
D1
Pin 5
2
L1
Pin 4
Pin 3
I/O 5
L6
13
Pin 11
5 6 7
8
L3 L4 L5 L6
3mm X 3mm
R8
D2
Pin 7
Pin 8
Pin 9
10 11
L8 L8
R1
I/O 3
Pin 1
12
L7
I/O 2
Pin 2
D1
9
L7
I/O 1
Pin 10
Center tab as the ground
05217.R5 3/11
Page 1
www.protekdevices.com
05217
EM8Q-100
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
TA
-40 to 85
°C
Operating Temperature
Storage Temperature
TSTG
-55 to 150
°C
DC Power per Resistor
P
100
mW
Typical Resistance @ ±15%
R
100
OHMs
Soldering Temperature for 10 seconds
TL
265
°C
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
EM8Q-100
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
LEAKAGE
CURRENT
typical
forward
voltage
MINIMUM
ATTENUATION
cut-off
frequency
(50 ohms i/o)
zero bias
TYPICAL
CAPACITANCE
per line
(Note 1)
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@ 3V
ID
µA
@ 10mA
VF
VOLTS
@
800-3000 MHz
dB
fC
MHz
@2.5V, 1MHz
C
pF
5.0
6.0
0.1
0.8
25
150
20
NoteS
1. ± 20% tolerance.
05217.R5 3/11
Page 2
www.protekdevices.com
05217
EM8Q-100
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
typical filter performance
(TA = 25°C, DC Bias = 0V, 50 Ohm Environment)
0
Insertion Loss - dB
-10
-20
-30
-40
1
10
1000
10000
figure 2
resistance vs temperature
(Normalized to Resistance at 25°C)
1.10
Normalized Resistance
100
Frequency - MHz
1.06
1.02
0.98
0.94
0.90
-40
05217.R5 3/11
-20
0
20
40
Temperature - °C
Page 3
60
80
100
www.protekdevices.com
05217
EM8Q-100
Only One Name Means ProTek’Tion™
qfn-16 package information
C
outline dimensions
dim
millimeters
min
A
B
max
inches
min
3.00 SQ
1.65
Pin 1
max
F
D
E
0.118 SQ
1.75
0.065
0.069
C
1.50 BSC
0.059 BSC
D
0.50 BSC
0.020 BSC
E
0.18
0.28
0.007
0.011
F
0.35
0.45
0.014
0.018
G
0.71
0.81
0.028
0.032
H
0.00
0.05
0.00
0.002
I
0.18
0.23
0.007
0.009
A
Chamfer 0.300 x 45
B
TOP VIEW
G
NOTEs
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.M, 1985.
3. Decimal tolerances for mounting pad and outline .xxx ± 0.05mm (±
0.002”).
4. Package length, width and height does not include protrusions, lead
and gate burrs.
H
SIDE VIEW
I
pad layout dimensions
millimeters
inches
nominal
nominal
4.00
0.16
B
0.70
0.028
C
1.00
0.040
D
0.50
0.020
E
0.30
0.012
dim
A
Pin 1
B
A
C
NOTES
1. Controlling dimension: millimeters.
E
05217.R5 3/11
Page 4
D
www.protekdevices.com
05217
EM8Q-100
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
D
t
10 Pitches Cumulative
Tolerance on tape ± 0.2
P2
E
F
Pin 1
W
K0
B0
A0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
12mm
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
3.30 ± 0.10 3.30 ± 0.10 1.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.10 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 8.00 ± 0.10
0.25
Notes
1.
2.
3.
4.
5.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T73 = 7” Reel - 3,000 pieces per 12mm tape.
Suffix - T13 = 13” Reel - 10,000 pieces per 12mm tape.
Marking on Part - logo, part number and pin one defined by dot on package.
Package outline, pad layout and tape specifications per document number 06054.R3 3/11.
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
EM8Q-100
-LF
-T73
3,000
7”
n/a
EM8Q-100
-LF
-T13
10,000
7”
n/a
05217.R5 3/11
Page 5
www.protekdevices.com
05217
EM8Q-100
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2005 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05217.R5 3/11
Page 6
www.protekdevices.com
Similar pages