Part Number: EMG2835D 3.81mmx19.05mm LED LIGHT BAR www.SunLED.com Features z UNIFORM LIGHT EMITTING AREA. z LOW CURRENT OPERATION. z EASILY MOUNTED ON P.C. BOARDS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z RoHS COMPLIANT. Operating Characteristics (TA=25°C) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MG (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 140 mA Power Dissipation PT 62.5 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number °C MG (GaP) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 565 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 30 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF 260°C For 3~5 Seconds Emitting Color EMG2835D Published Date : MAR 19, 2008 Green Emitting Material GaP Luminous Intensity (IF=20mA) mcd Lens-color Green Diffused Drawing No : SDSA3883 V4 Wavelength nm λP min. typ. 36 98 Checked : Shin Chi 565 P.1/4 Part Number: EMG2835D 3.81mmx19.05mm LED LIGHT BAR www.SunLED.com MG Published Date : MAR 19, 2008 Drawing No : SDSA3883 V4 Checked : Shin Chi P.2/4 Part Number: EMG2835D 3.81mmx19.05mm LED LIGHT BAR www.SunLED.com Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 19, 2008 Drawing No : SDSA3883 V4 Checked : Shin Chi P.3/4 Part Number: 3.81mmx19.05mm LED LIGHT BAR www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 19, 2008 EMG2835D Drawing No : SDSA3883 EMG2835D V4 Checked : Shin Chi P.4/4