Panasonic ERJ8BQJR22V Thick film chip resistors / low resistance type Datasheet

Thick Film Chip Resistors / Low Resistance Type
Thick Film Chip Resistors / Low Resistance Type
ERJ R, B : 0402, 0603, 0805, 1206, 1210, 1812, 2512
ERJ L
: 0603, 0805, 1206, 1210, 1812, 2010, 2512
Type:
ERJ 2B, 3R, 3B, 6R, 6B, 8R, 8B,
14R, 14B, 12R, 1TR
ERJ L03, L06, L08, L14, L12,
L1D, L1W
■ Features
● Small size and lightweight
● High reliability
Metal glaze thick film resistive element and three layers of electrodes
● Suitable for both reflow and flow soldering
● Low Resistance Value
ERJ2BW Type : 47 m to 91 m
ERJ6BW, 8BW Type : 10 m to 100 m
ERJ2BS, 2BQ Type : 0.1 to 1.0 ERJ3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR Type : 0.1 to 9.1 ERJL03, L06, L08 Type : 47 m to 100 m
ERJL14, L12 Type : 20 m to 100 m
ERJL1D, L1W Type : 40 m to 100 m
● Reference Standards
IEC 60115-8, JIS C 5201-8
■ Explanation of Part Numbers
● ERJ2BS/2BQ, 3R, 3B, 6R, 6B, 8R, 8B, 14R, 14B, 12R, 1TR Series
1
2
3
4
5
6
7
8
9
10
11
E
R
J
8
R
Q
F
R
2
2
V
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Type: inches Power R.
2B : 0402 0.125 W
3R : 0603
0.1 W
3B : 0603
0.2 W
6R : 0805 0.125 W
6B : 0805 0.25 W
8R : 1206 0.25 W
8B : 1206 0.33 W
14R : 1210 0.25 W
14B : 1210
0.5 W
12R : 1812
0.5 W
1TR : 2512
1W
Resistance Value
Res. Value
Code
S 0.1 to 0.2 Q 0.22 to 9.1 ✽
✽ 2B : 0.22 to 1.0 Resistance Tolerance
Code
Tolerance
F
±1%
G
±2%
J
±5%
Packaging Methods
Packaging
Code
X
Punched Carrier Taping
2 mm pitch
V
Punched Carrier Taping
4 mm pitch
U
Embossed Carrier Taping
4 mm pitch
Type
ERJ2BS
ERJ2BQ
ERJ3R/3B
ERJ6R/6B
ERJ8R/8B
ERJ14R/14B
ERJ12R
ERJ1TR
Resistance Value
Shown by 3 digits or letters.
(Ex.) R22 : 0.22 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jun. 2008
Thick Film Chip Resistors / Low Resistance Type
● ERJ2BW, 6BW, 8BW Series
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
2
B
W
G
R
0
4
7
X
Code Size:inches Power Rating
0.125 W
2BW
0402
0.33 W
6BW
0805
0.5 W
8BW
1206
Product Code
Thick Film
Chip Resistors
Resistance Tolerance
Resistance Value
47 m to 91 m
10 m to 100 m
10 m to 100 m
Code
F
G
J
Code
Tolerance
±1%
±2%
±5%
X
Packaging Methods
Packaging
Pressed Carrier Taping
2 mm pitch
Punched Carrier Taping
4 mm pitch
V
Type
ERJ2BW
ERJ6BW
ERJ8BW
Resistance Value
Shown by 4 digits or letters.
(Ex.) R047 : 0.047 =47 m
● ERJL03, L06, L08, L14, L12, L1D, L1W Series
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
L
1
4
K
J
5
0
M
U
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Type: inches Power R.
L03 : 0603
0.1 W
L06 : 0805 0.125 W
L08 : 1206
0.25 W
L14 : 1210
0.33 W
L12 : 1812
0.5 W
L1D : 2010
0.5 W
L1W : 2512
1W
Resistance Tolerance
Res. Value
Code
Std.
✽
20 m, 22 m, 33 m,
K
39 m, 47 m, 50 m,
100 m
U
20 m to 100 m✽
✽ L03, L06, L08 : 47 m to 100 m
L1D, L1W : 40 m to 100 m
(
)
Code
F
J
Code
Tolerance
±1%
±5%
V
U
Packaging Methods
Packaging
Type
ERJL03
Punched Carrier Taping
ERJL06
4 mm pitch
ERJL08
ERJL14
Embossed Carrier Taping ERJL12
4 mm pitch
ERJL1D
ERJL1W
Resistance Value
Shown by 3 digits or letters.
(Ex.) 50 M:50 m, 10 C:100 m
■ Construction
■ Dimensions in mm (not to scale)
L
a
W
t
Protective coating
b
Alumina substrate
Electrode (Inner)
Electrode
(Between)
Thick film
resistive element
Electrode (Outer)
Type
(inches)
Dimensions (mm)
L
W
a
b
Mass(Weight)
[g/1000 pcs.]
t
±0.10
ERJ2BW (0402) 1.00 ±0.10 0.50 +0.10
0.24±0.10 0.35 ±0.05
–0.05 0.24
0.8
ERJ2BS
±0.10
(0402) 1.00 ±0.10 0.50 +0.10
0.27±0.10 0.35 ±0.05
–0.05 0.20
ERJ2BQ
0.8
ERJ3R
ERJ3B (0603)
ERJL03
ERJ6BW(0805)
ERJ6R
ERJ6B (0805)
ERJL06
ERJ8BW(1206)
ERJ8R
ERJ8B (1206)
ERJL08
ERJ14R
ERJ14B (1210)
ERJL14
ERJ12R
(1812)
ERJL12
±0.20
0.30 ±0.15 0.45 ±0.10
1.60 ±0.15 0.80 +0.15
–0.05 0.30
2
2.00 ±0.20 1.25 ±0.20 0.55 ±0.20 0.55 ±0.20 0.65 ±0.10
6
2.00 ±0.20 1.25 ±0.10 0.40 ±0.20 0.40 ±0.20 0.60 ±0.10
4
3.20 ±0.20 1.60 ±0.20 1.00 ±0.20 1.00 ±0.20 0.65 ±0.10
13
+0.05
±0.20
0.50 ±0.20 0.60 ±0.10
3.20 +0.05
–0.20 1.60 –0.15 0.50
10
3.20 ±0.20 2.50 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.10
16
4.50 ±0.20 3.20 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.10
27
ERJL1D (2010) 5.00 ±0.20 2.50 ±0.20 0.60 ±0.20 0.60 ±0.20 0.60 ±0.10
27
±0.20
±0.20
±0.20
±0.20
±0.10
6.40
3.20
0.65
0.60
0.60
ERJ1TR
(2512)
ERJL1W
6.40 ±0.20 3.20 ±0.20 0.65 ±0.20 1.30 ±0.20 1.10 ±0.10
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
45
79
Mar. 2008
Thick Film Chip Resistors / Low Resistance Type
■ Ratings
<Low resistance type>
ERJL03
(0603)
ERJL06
(0805)
ERJL08
(1206)
Power Rating
at 70 °C
(W)
0.1
(0.2) ✽1
0.125
(0.25) ✽1
0.25
(0.33) ✽1
ERJL14
(1210)
0.33
Type (inches)
ERJL12
ERJL1D
(1812)
(2010)
ERJL1W (2512)
0.5
Category Temperature Range
Resistance
Tolerance
(%)
Resistance
Range
()
±1, ±5
47 m to 100 m ✽2
±200
–55 to +125
±1,±5
47 m to 100 m ✽2
±100
–55 to +125
±1, ±5
47 m to 100 m ✽2
±100
–55 to +125
±1, ±5
20 m to 100 m ✽2
±1, ±5
20 m to 100 m
✽2
R<47 m:±300
–55 to +125
✽2
R >47 m:±100
–55 to +125
T.C.R.
(Operating Temperature Range)
[10 –6/°C (ppm/°C)]
(°C)
0.5
±1, ±5
40 m to 100 m
1
±1, ±5
40 m to 100 m ✽2
–55 to +125
–55 to +125
✽1 Please contact us when resistors with guaranteed high power are needed.
✽2 Standard R.V. : 20 m, 22 m, 33 m, 39 m, 47 m, 50 m, 100 m, Custom R.V. : Each 1 m within upper range.
<High power type>
Type (inches)
ERJ2BW
ERJ2BS
ERJ2BQ
ERJ3BS
(0402)
(0402)
(0402)
(0603)
ERJ3BQ (0603)
ERJ6BW (0805)
Power Rating
at 70 °C
(W)
0.125
ERJ8BW (1206)
±2, ±5
±1, ±2, ±5
0.2
±1, ±2, ±5
0.33
ERJ6BS (0805)
ERJ6BQ (0805)
Resistance
Tolerance
(%)
0.01 to 0.1
±1, ±2, ±5
0.25
0.5
±1, ±2, ±5
0.33
±1, ±2, ±5
0.5
±1, ±2, ±5
Power Rating
at 70 °C
(W)
Resistance
Tolerance
(%)
0.1
±1, ±2, ±5
ERJ8BS (1206)
ERJ8BQ (1206)
ERJ14BS (1210)
ERJ14BQ (1210)
Resistance
Range
()
0.047 to 0.091 (E24)
0.10 to 0.20 (E24)
0.22 to 1.0 (E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
0.01 to 0.1
0.10
0.22
1.0
0.10
0.22
1.0
to
to
to
to
to
to
0.20
0.91
9.1
0.20
0.91
9.1
Category Temperature Range
T.C.R.
(Operating Temperature Range)
[10 /°C (ppm/°C)]
(°C)
–6
±300
–55 to +125
±250
±300
–55 to +125
±200
R<0.015 :±300
R>0.015 :±200
–55 to +155
±250
–55 to +125
±200
0.010 < R < 0.020 : ±200
(E24) 0.020 < R < 0.047 : ±150
0.047 < R < 0.100 : ±100
(E24)
±250
(E24)
(E24)
±200
(E24)
±200
(E24)
(E24)
±100
–55 to +155
–55 to +125
–55 to +125
<Standard type>
Type (inches)
ERJ3RS (0603)
ERJ3RQ (0603)
ERJ6RS (0805)
ERJ6RQ (0805)
0.125
±1, ±2, ±5
ERJ8RS (1206)
ERJ8RQ (1206)
0.25
±1, ±2, ±5
ERJ14RS (1210)
ERJ14RQ (1210)
0.25
±1, ±2, ±5
ERJ12RS (1812)
ERJ12RQ (1812)
0.5
±1, ±2, ±5
ERJ1TRS (2512)
ERJ1TRQ (2512)
1
±1, ±2, ±5
Resistance
Range
()
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
Category Temperature Range
T.C.R.
(Operating Temperature Range)
[10 –6/°C (ppm/°C)]
(°C)
±300
–55 to +125
±200
±250
–55 to +125
±200
±250
–55 to +125
±200
±200
–55 to +125
±100
±200
–55 to +125
±100
±200
–55 to +125
±100
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Jun. 2008
Thick Film Chip Resistors / Low Resistance Type
–55 °C
100
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
70 °C
80
60
2B, 3R, 3B, 6R, 6B, 8R, 8B,
14R, 14B, 12R, 1TR,
L03, L06, L08, L14, L12, L1D, L1W
40
125 °C
0
–60 –40 –20
0
Kind of Taping
Pressed Carrier Taping
ERJ2BS, 2BQ
ERJ3R, 3B, L03
20
40
60
80 100 120 140 160 180
Ambient Temperature (°C)
● Standard Quantity
Type
155 °C
20
■ Packaging Methods (Taping)
ERJ2BW
6BW, 8BW
Pitch (P1)
Quantity
2 mm
10000 pcs./reel
Punched Carrier Taping
ERJ6R, 6B, L06
ERJ8R, 8B, L08
5000 pcs./reel
ERJ14R, 14B, L14
4 mm
ERJ12R, L12
Embossed Carrier Taping
ERJL1D
ERJ1TR
4000 pcs./reel
ERJL1W
3000 pcs./reel
● Carrier Tape
(Unit : mm)
Punched Carrier
Embossed Carrier
P1
φD0
P2
P0
B
W
F
E
Pressed Carrier
T
P1 (2 mm pitch)
A
T
T
φD1 (Only Emboss)
Type
A
B
±0.10
ERJ2BW
0.67
1.17
ERJ2BS, 2BQ
0.67±0.05
1.17±0.05
±0.10
±0.05
ERJ3R, 3B, L03
1.10
ERJ6BW
1.55 ±0.15
2.30 ±0.20
±0.15
±0.20
ERJ6R, 6B, L06
1.65
W
F
E
P1
P2
φD 0
P0
1.90
2.50
ERJ8BW, 8R, 8B, L08 2.00 ±0.15
3.60 ±0.20
±0.20
±0.20
ERJ14R, 14B, L14
2.80
ERJ12R, L12
3.50 ±0.20
4.80 ±0.20
ERJL1D
2.80
±0.20
5.30 ±0.20
ERJ1TR
3.60 ±0.20
6.90 ±0.20
ERJL1W
3.60 ±0.20
6.90 ±0.20
3.50
±0.05
–
0.52±0.05
–
±0.05
–
0.61
2.00 ±0.10
8.00 ±0.20
0.70
3.50 ±0.05
–
0.84
1.75 ±0.10
8.00
φD1
T
±0.10
±0.30
2.00 ±0.05
4.00
4.00 ±0.10
±0.05
+0.10
1.50−0
–
–
±0.10
1.0 +0.10
−0
1.00 ±0.10
12.00 ±0.30 5.50 ±0.20
1.5 min.
1.60 ±0.10
● Taping Reel
(Unit : mm)
T
φB
φC
φA
W
Type
ERJ2B
ERJ3R, 3B, L03
ERJ6R, 6B, L06
ERJ8R, 8B, L08
ERJ14R, 14B, L14
ERJ12R, L12
ERJL1D
ERJ1TR
ERJL1W
φA
φB
φC
W
T
9.0 ±1.0
11.4±1.0
±1.0
180.0 +0
–3.0 60 min. 13.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
13.0 ±1.0 15.4±2.0
Feb. 2007
Thick Film Chip Resistors / Low Resistance Type
■ Recommended Land Pattern
In case of flow soldering, the land width must be smaller than the Chip Resistor width to control the solder amount properly.
Generally, the land width should be 0.7 to 0.8 times (W) of the width of chip resistor. In case of reflow soldering, solder
amount can be adjusted, therefore the land width should be set to 1.0 to 1.3 times chip resistor width (W).
Type (inches)
c
Chip Resistor
a
b
ERJ2BW
(0402)
ERJ2B
(0402)
ERJ3R, 3B, L03 (0603)
ERJ6BW
(0805)
ERJ6R, 6B, L06 (0805)
ERJ8BW
(1206)
ERJ8R, 8B, L08 (1206)
ERJ14R, 14B, L14 (1210)
ERJ12R, L12
(1812)
ERJL1D
(2010)
ERJ1TR
(2512)
ERJL1W
(2512)
a
0.52
0.5 to 0.6
0.7 to 0.9
0.9
1 to 1.4
1.2
2 to 2.4
2 to 2.4
3.3 to 3.7
3.6 to 4
5 to 5.4
3.6 to 4
Dimensions (mm)
b
1.4 to 1.6
0.4
1.4 to 1.6
0.4
2 to 2.2
0.8
3.2 to 3.8
1.1
3.2 to 3.8
0.9
4.4 to 5
1.3
4.4 to 5
1.2
4.4 to 5
1.8
5.7 to 6.5
2.3
6.2 to 7
1.8
7.6 to 8.6
2.3
7.6 to 8.6
2.3
c
to 0.6
to 0.6
to 1
to 1.4
to 1.4
to 1.8
to 1.8
to 2.8
to 3.5
to 2.8
to 3.5
to 3.5
■ Recommended Soldering Conditions
Recommendations and precautions are described below.
● Recommended soldering conditions for reflow
· Reflow soldering shall be performed a maximum of
two times.
· Please contact us for additional information when
used in conditions other than those specified.
· Please measure the temperature of the terminals
and study every kind of solder and printed circuit
board for solderability before actual use.
Temperature
Peak
Preheating
Heating
For soldering (Example : Sn/Pb)
Preheating
Main heating
Peak
Temperature
140 °C to 160 °C
Above 200 °C
235 ± 5 °C
Time
60 s to 120 s
30 s to 40 s
max. 10 s
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
Time
Preheating
150 °C to 180 °C
60 s to 120 s
Main heating
Above 230 °C
30 s to 40 s
Peak
max. 260 °C
max. 10 s
Time
● Recommended soldering conditions for flow
Preheating
Soldering
For soldering
Temperature
Time
140 °C to 180 °C
60 s to 120 s
245 ± 5 °C
20 s to 30 s
For lead-free soldering
Temperature
Time
150 °C to 180 °C
60 s to 120 s
max. 260 °C
max. 10 s
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors
shown on page ER2 of this catalog.
1. Take measures against mechanical stress during and after mounting of Thick Film Chip Resistors (hereafter called the
resistors) so as not to damage their electrodes and protective coatings.
2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations
of the resistors when installed in your products before use.
Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired.
3. Do not use halogen-based or other high-activity flux. Otherwise, the residue may impair the resistors' performance
and/or reliability.
4. When soldering with a soldering iron, never touch the resistors' bodies with the tip of the soldering iron. When using a
soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.).
5. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing
problems such as cracks and faulty characteristics. Avoid applying an excessive amount of solder.
6. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors'
protective coatings and bodies may be chipped, affecting their performance.
7. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2007
Safety Precautions
(Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (au to mo bile, train, vessel), traffi c lights, medical equipment, aerospace equipment, elec tric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
• These products are designed and manufactured for general and stan dard use in general elec tron ic
equipment (e.g. AV equipment, home electric ap plianc es, offi ce equipment, information and com mu ni cation
equipment)
• These products are not intended for use in the following special conditions. Before using the products, carefully
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin
or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will not
affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or
inflammables, such as vinyl-coated wires, near these products .
• Note that non- cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the
performance or reliability of the products.
• Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave
water residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °
C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their
electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials)
may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Oct. 2007
– ER3 –
Similar pages