Frontier ES2A-LFR 2a fast efficient surface mount rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
2A FAST EFFICIENT SURFACE MOUNT RECTIFIER
ES2A-LFR THRU ES2J-LFR
FEATURES
z LOW PROFILE PACKAGE
z PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY 94V-0
z IDEAL FOR SURFACE MOUNTED APPLICATION
z GLASS PASSIVATED CHIP JUNCTION
z BUILT-IN STRAIN RELIEF DESIGN
z FAST EFFICIENT RECOVERY TIME FOR HIGH EFFICIENT
z HIGH TEMPERATURE SOLDERING: 250°C/10 SECONDS AT
TERMINAL
z ROHS
CATHODE
.086(2.20)
.077(1.96)
.220(5.59)
.205(5.21)
.180(4.57)
.160(4.06)
.155(3.94)
.130(3.30)
.096(2.44)
.084(2.13)
MECHANICAL DATA
z CASE: JEDEC DO-214AA (SMB), MOLDED PLASTIC BODY,
DIMENSIONS IN INCHES AND (MILLIMETERS)
z TERMINAL: SOLDER PLATED, SOLDERABLE PER MIL-STD750 METHOD 2026
z POLARITY: COLOR BAND DENOTES CATHODE
z WEIGHT:0.093 GRAMS
.060(1.52)
.030(0.76)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE
PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
SYMBOL ES2A-LFR ES2B-LFR ES2D-LFR ES2E-LFR ES2G-LFR ES2J-LFR UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
MAXIMUM RMS VOLTAGE
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
AT TL=90°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
VRRM
VRMS
VDC
TYPICAL THERMAL RESISTANCE (NOTE 2)
STORAGE TEMPERATURE RANGE
OPERATING TEMPERATURE RANGE
50
35
50
100
70
100
200
140
200
300
210
300
400
280
400
600
420
600
V
V
V
IO
2.0
A
IFSM
50
A
CJ
25
PF
RθjL
20
℃/W
TSTG
- 55 TO + 150
℃
TOP
- 55 TO + 150
℃
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL ES2A-LFR ES2B-LFR ES2D-LFR ES2E-LFR ES2G-LFR ES2J-LFR UNITS
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
MAXIMUM REVERSE CURRENT AT 25℃
IR
0.98
10
1.25
μA
MAXIMUM REVERSE CURRENT AT 100℃
IR
150
μA
MAXIMUM REVERSE RECOVERY TIME (NOTE 3)
TRR
25
MARKING
ES2A
ES2B
ES2D
ES2E
NOTE:
1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS
2. THERMAL RESISTANCE FROM JUNCTION TO AMBIENT AND JUNCTION TO LEAD P.C.B. MOUNTED ON
0.3×0.3”(8.0×8.0mm) COPPER PAD AREAS
3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A
ES2A-LFR THRU ES2J-LFR
1.75
V
nS
ES2G
Page: 1
ES2J
RATINGS AND CHARACTERISTIC CURVE ES2A-LFR THRU ES2J-LFR
FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTIC
FIG. 2-TYPICAL FORWARD
CURRENT DERATING CURVE
Trr
100Ω
NO INDUCTIVE
50Ω
NO INDUCTIVE
3.0
AVERAGE FORWARD
CURRENT (A)
+0.5A
(-)
D.U.T.
0
PULSE
GENERATOR
( NOTE 2 )
(+)
25 Vdc
(approx)
1Ω
NON
INDUCTIVE
(-)
OSCILLOSCOPE
( NOTE 1 )
-0.25A
(+)
-1.0A
SINGLE PHASE
HALF WAVE 60Hz
RESISTIVE OR
INDUCTIVE LOAD
2.0
1.0
P.C.B MOUNTED ON
0.3×0.3”(8.0×8.0mm)
COPPER PAD AREAS
0
1cm
NOTE: 1. RISE TIME=7ns MAX. INPUT
IMPEDANCE=1 MOhms 22PF
2. RISE TIME =10ns MAX. SOURCE
IMPEDANCE=50 OHMS
SET TIME BASE
FOR 10/20 ns/cm
FIG. 4-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1000
INSTANTANEOUS FORWARD CURRENT (A)
INSTANTANEOUS REVERSE CURRENT (uA)
FIG. 3-TYPICAL REVERSE CHARACTERISTICS
100
100
1010
TJ=125oC
1.0
1
TJ=80oC
0.1
0.1
TJ=25oC
0.01
.01
20
40
20 40 60 80 100 120 140 160 180 200
LEAD TEMPERATURE (oC)
10.0
ES2A-LF ~ES2D-LF
1.0
ES2E-LF ~ES2G-LF
.1
.01
ES2J-LF
.001
.4
60 80 100 120 140
.6
.8 1.0 1.2 1.4 1.6 1.8 2.0
INSTANTANEOUS FORWARD VOLTAGE (V)
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
FIG. 6-TYPICAL JUNCTION CAPACITANCE
FIG. 5-MAXIMUN NON-REPETITIVE
FORWARD SURGE CURRENT
200
8.3 ms Single Half Sine Wave
(JEDEC Method)
60
100
JUNCTION CAPACITANCE (pF)
PEAK FORWARD SURGE CURRENT (A)
70
50
40
30
20
10
40
TJ=25oC
20
10
6
4
2
1
0
1
5
10 20
50
100
NUMBER OF CYCLES AT 60 Hz
ES2A-LFR THRU ES2J-LFR
.1 .2
.4
1.0 2
4
10 20 40 100
REVERSE VOLTAGE (V)
Page: 2
Similar pages