Gulf ES2C-A Surface mount fast ultrafast rectifier voltageï¼ 50 to 400v currentï¼ 2.0a Datasheet

ES2A-A THRU ES2G-A
SURFACE MOUNT FAST
ULTRAFAST RECTIFIER
VOLTAGE:
:50 TO 400V
CURRENT:
:2.0A
SMA/
/DO-214AA
FEATURE
Ideal for surface mount pick and place application
Low profile package
Built-in strain relief
High surge capability
High temperature soldering guaranteed
260℃/10sec/at terminals
Glass passivated chip
Ultrafast recovery time for high efficiency
MECHANICAL DATA
Terminal:Solder plated, solderable per MIL-STD-750,
Method 2026
Case:JEDEC DO-214AC molded plastic body over
passivated chip
Polarity:color band denotes cathode
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
ES2A-A
ES2B-A
ES2C-A
ES2D-A
ES2G-A
units
Maximum Recurrent Peak Reverse Voltage
Vrrm
50
100
150
200
400
V
Maximum RMS Voltage
Vrms
35
70
105
140
280
V
Maximum DC blocking Voltage
Vdc
50
100
150
200
400
V
Maximum Average Forward Rectified at TL =100℃
Peak Forward Surge Current 8.3ms single half
sine- wave superimposed on rated load
Maximum Instantaneous Forward Voltage at rated
forward current
Maximum DC Reverse Current
Ta =25℃
at rated DC blocking voltage
Ta =100℃
If(av)
2.0
A
Ifsm
50.0
A
Vf
0.92
1.25
10.0
350.0
Ir
µA
Maximum Reverse Recovery Time
(Note1 )
Trr
Typical Junction Capacitance
(Note 2)
Cj
18.0
pF
Typical Thermal Resistance
(Note 3)
Rth(ja)
Rth(jl)
75.0
20.0
℃/W
Tstg, Tj
-55 to +150
℃
Storage and Operating Junction Temperature
15
V
25
nS
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Units mounted on P.C.B. 5.0×5.0mm(0.013mm thick) land areas
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES ES2A-A THRU ES2G-A
Rev.A1
www.gulfsemi.com
Similar pages