Vishay ESH1PB-E384A Vishay general semiconductor Datasheet

New Product
ESH1PB, ESH1PC & ESH1PD
Vishay General Semiconductor
High Current Density Surface Mount Ultrafast Rectifiers
eSMPTM
FEATURES
• Very low profile - typical height of 1.0 mm
Series
• Ideal for automated placement
• Glass passivated chip junction
• Ultrafast recovery times for high frequency
• Low forward voltage drop, low power loss
• Low thermal resistance
DO-220AA (SMP)
• Meets MSL level 1 per J-STD-020C, LF max peak
of 260 °C
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
MAJOR RATINGS AND CHARACTERISTICS
IF(AV)
1A
VRRM
100 V, 150 V, 200 V
trr
25 ns
VF
0.90 V
Tj max.
175 °C
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for
ultrafast switching speeds of ac-to-ac and dc-to-dc
converters in high temperature conditions for both
consumer and automotive applications.
MECHANICAL DATA
Case: DO-220AA (SMP)
Epoxy meets UL-94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
ESH1PB
PB
PC
PD
Maximum repetitive peak reverse voltage
VRRM
100
150
200
Device marking code
ESH1PC
ESH1PD
UNIT
V
Maximum average forward rectified current (Fig. 1)
IF(AV)
1.0
A
Peak forward surge current 10 ms single half sinewave superimposed on rated load
IFSM
50
A
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 175
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
VF
0.86
0.90
V
Maximum reverse current at rated Tj = 25 °C
VR (1) voltage
Tj = 125 °C
IR
1.0
25
µA
Maximum reverse current
IR
50
µA
Maximum instantaneous forward
voltage (1)
Document Number: 88895
Revision: 25-Jun-07
TEST CONDITIONS
at IF = 0.7 A, Tj = 25 °C
at IF = 1 A, Tj = 25 °C
at VR = 20 V, Tj = 150 °C
www.vishay.com
1
New Product
ESH1PB, ESH1PC & ESH1PD
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Maximum reverse recovery time
at IF = 0.5 A, IR = 1 A, Irr = 0.25 A
TEST CONDITIONS
trr
25
ns
Typical reverse recovery time
at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C
at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C
trr
25
35
ns
Typical reverse recovery time
at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 25 °C
at IF = 1.0 A, VR = 30 V di/dt = 50 A/µs, Irr = 10 % IRM Tj = 100 °C
Qrr
10
15
nC
Typical junction capacitance
at 4.0 V, 1 MHz
CJ
25
pF
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
ESH1PB
ESH1PC
105
15
20
RθJA
RθJL
RθJC
Typical thermal resistance (1)
ESH1PD
UNIT
°C/W
Note:
(1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 x 5.0 mm copper pad areas. RθJL is measured
at the terminal of cathode band. RθJC is measured at the top centre of the body
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
ESH1PB-E3/84A
0.024
84A
3000
7" Diameter Plastic Tape & Reel
ESH1PB-E3/85A
0.024
85A
10000
13" Diameter Plastic Tape & Reel
ESH1PBHE3/84A (1)
0.024
84A
3000
7" Diameter Plastic Tape & Reel
ESH1PBHE3/85A (1)
0.024
85A
10000
13" Diameter Plastic Tape & Reel
Note:
(1) Automotive grade AEC Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
50
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.2
1.0
0.8
0.6
0.4
TL measured
at the cathode band terminal
0.2
0
40
30
20
10
0
95
105
115
125
135
145
155
165
175
1
100
10
Lead Temperature (°C)
Number of Cycles at 50 Hz
Figure 1. Forward Current Derating Curve
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
Document Number: 88895
Revision: 25-Jun-07
New Product
ESH1PB, ESH1PC & ESH1PD
Vishay General Semiconductor
1000
10
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
Tj = 175 °C
Tj = 150 °C
1
Tj = 25 °C
0.1
10
Tj = 125 °C
0.01
0.2
0.4
0.6
0.8
1.2
1.0
1.4
1
0.1
1.6
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 5. Typical Junction Capacitance
1000
1000
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (µA)
100
Tj = 175 °C
100
Tj = 150 °C
10
Tj = 125 °C
1
0.1
Tj = 25 °C
0.01
10
20
30
40
50
60
70
80
90
100
10
1
0.01
100
1
0.1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Figure 4. Typical Reverse Leakage Characteristics
Figure 6. Typical Transient Thermal impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF
Cathode band
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.142 (3.61)
0.126 (3.19)
0.158 (4.00)
0.146 (3.70)
0.025
(0.635)
0.030
(0.762)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30)
0.000 (0.00)
Document Number: 88895
Revision: 25-Jun-07
0.036 (0.91)
0.024 (0.61)
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.100
(2.54)
0.050
(1.27)
0.018 (0.45)
0.006 (0.15)
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Similar pages