NEC ET2F High heat resistivity Datasheet

DATA S H E E T
AUTOMOTIVE RELAY
ET2F/ET1F SERIES
HIGH HEAT RESISTIVITY
DESCRIPTION
The new NEC ET2F/ET1F series is PC-board mount type automotive relay suitable for various motor and
heater control applications that require a high quality and performance. ET2F is a twin relay type and ET1F is a
single relay type. The operate temperature range for ET2F/ET1F series is –40˚C through +125˚C.
By this high heat resistivity, the contact carrying current of ET2F/ET1F series at 25˚C increases 1.3 to 1.4 times
compared with that of ET2/ET1 series.
FEATURES
™ Operating ambient temperature up to +125˚C (ET2/ET1 : +85˚C)
™ Suitable for motor and solenoid reversible control
™ High performance and productivity by unique structure
™ Flux tight housing
APPLICATIONS
™ Motor control
™ Heater control
™ Solenoid control
Type ET2F
Type ET1F
For Proper Use of Miniature Relays
DO NOT EXCEED MAXIMUM RATINGS.
Do not use relays under exceeding conditions such as over ambient temperature, over voltage and
over current. Incorrect use could result in abnormal heating and damage to relay or other parts.
READ CAUTIONS IN THE SELECTION GUIDE.
Read the cautions described in NEC's "Miniature Relays" (ER0046EJ∗) before dose designing
your relays applications.
The information in this document is subject to change without notice.
Document No. ER0482EJ1V0DS00
Date Published October 1999 M
Printed in Japan
©
1999
ET2F/ET1F SERIES
SCHEMATIC (BOTTOM VIEW)
ET2F
2
1
3
ET1F
2
4
5
8
7
6
4
3
1
5
DIMENSIONS mm (inch)
ET2F
ET1F
Vent Hole
PHILIPPINES
PHILIPPINES
Date Code
Vent Hole
ET1F-B3M1S
ET2F-B3M1S 9G5 99
9G5 99
Date Code
Part Number
12.8±0.5
(0.50)
∗2.06-1.1
(0.023×0.043)
11.0
(0.43)
10.5±0.5
(0.41)
0.5 (0.02)
2.05(0.081)
9.35
(0.37)
6.4
(0.25)
1.15(0.045)
10.5±0.5
(0.41)
(0.149)
4.6
(0.25)
∗2- φ 0.6
(0.023)
∗2-0.6×1.1
(0.023×0.043)
1.13
(0.044)
3.7
(0.145)
∗2.04-1.3
(0.016×0.051)
∗4- φ 0.6
(0.023)
7.3
(0.29)
9.87
(0.39)
11.0
(0.43)
∗0.4×1.3
(0.013×0.051)
4.6
(0.25)
4.35 2.95
(0.17) (0.12)
0.4
(0.016)
3.6
(0.14)
12.8±0.5
(0.50)
14.0±0.5
(0.57)
(0.14)
1.0(0.04)
5.25 4.35
(0.21) (0.17)
9.87
(0.39)
7.3
(0.29)
3.6
∗3.8+1.0
–0.5
0.5 (0.02)
22.0±0.5
(0.87)
∗3.8 +1.0
–0.5
(0.149)
Part Number
∗: After soldering
7.4
(0.29)
10.6
(0.42)
12.0
(0.472)
PCB PAD LAYOUT mm (inch) (BOTTOM VIEW)
0.4
(0.016)
3.6
(0.14)
11.0
(0.43)
2
7.3
(0.29)
9.87
(0.39)
11.0
(0.43)
9.35
(0.37)
6.4
(0.25)
φ 1.6+0.1
–0
(0.063)
2- φ 1.6+0.1
–0
(0.063)
DATA SHEET ER0482EJ1V0DS00
2- φ 1.1+0.1
–0
(0.043)
2- φ 1.5+0.1
–0
(0.059)
6.4
(0.25)
6.4
(0.25)
2- φ 1.5+0.1
–0
(0.059)
4.35 2.95
(0.17) (0.12)
(0.14)
1.0 (0.04)
5.25 4.35
(0.21) (0.17)
∗4- φ 1.1+0.1
–0
(0.043)
ET1F
2.05 (0.081)
1.15 (0.045)
ET2F
9.87
(0.39)
7.3
(0.29)
3.6
1.13
(0.044)
3.7
(0.145)
7.4
(0.29)
10.6
(0.42)
12.0
(0.472)
ET2F/ET1F SERIES
SPECIFICATIONS
(at 20˚C)
Twin
Single
Items
ET2F-B3M1/ET2F-B3M1S
ET1F-B3M1/ET1F-B3M1S
Contact Form
1 Form c × 2 (H Bridge)
1 Form c
Type
Max. Switching Voltage
16 V dc
Max. Switching Current
25 A (at 16 Vdc)
Max. Carrying Current
Contact Ratings
25 A (2 minutes 12 Vdc at 125˚C)
30 A (2 minutes 12 Vdc at 85˚C)
35 A (2 minutes 12 Vdc at 20˚C)
Min. Switching Current
30 A (2 minutes 12 Vdc at 125˚C)
35 A (2 minutes 12 Vdc at 85˚C)
40 A (2 minutes 12 Vdc at 20˚C)
1 A (at 5 Vdc)
Current Resistance
4 mΩ typical (measured at 7 A) Initial
Contact Material
Silver oxide comlex alloy
Operate Time (Excluding Bounce)
2.5 ms typical (at Nominal Voltage)
Release Time (Excluding Bounce)
3 ms typical (at Nominal Voltage, with diode) Initial
Nominal Operating Power
640 mW
Insulation Resistance
100 MΩ at 500 Vdc
Breakdown Voltage
Between Open Contacts
500 Vdc min. (for 1 minute)
Between Coil and Contacts
500 Vdc min. (for 1 minute)
98 m/s2 (10 G)
Misoperation
Shock Resistance
980 m/s2 (100 G)
Destructive Failure
10 to 300 Hz, 43 m/a2 (4.4 G)
Misoperation
Vibration Resistance
10 to 500 Hz, 43 m/a2 (4.4 G) 200 hour
Destructive Failure
Ambient Temperature
–40 to +125˚C (–40 to +257˚F)
Coil Temperature Rise
70˚C (158˚F) / W (without contact carrying current)
Life Expectancy
1 × 106 operations
Mechanical
Power Window Motor
(14 V, 20 A locked)
100 × 103 operations
Power Window Motor
(14 V, 20 A / 3 A, Unlocked)
100 × 103 operations
Electrical
Weight
Approx. 7.5 g (0.26 oz)
Approx. 4.5 g (0.16 oz)
COIL RATING
SSEALED TYPE
Contact Form
(at 20˚C)
Part Number
Twin
1 Form c × 2
ET2F-B3M1S
Single
1 Form c
ET1F-B3M1S
Nominal
Voltage
(Vdc)
Coil
Resistance
(Ω ± 10%)
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
12
225
6.5
0.9
Nominal
Voltage
(Vdc)
Coil
Resistance
(Ω ± 10%)
Must Operate
Voltage
(Vdc)
Must Release
Voltage
(Vdc)
12
225
6.5
0.9
SUNSEALED TYPE
Contact Form
(at 20˚C)
Part Number
Twin
1 Form c × 2
ET2F-B3M1
Single
1 Form c
ET1F-B3M1
DATA SHEET ER0482EJ1V0DS00
3
ET2F/ET1F SERIES
NUMBERING SYSTEM
ET2 F-B3M1S
Enclosure
Nil : Unsealed
S : Sealed
Must Operate Voltage
1 : 6.5 V
Contact Material
M : Silver oxide complex alloy
3 : 225 Ω
Coil Resistance
Contact carrying current
B : Standard type
Ambient temperature
Nil : Standard type
(–40 to +85˚C)
F : High heat resistivity (–40 to +125˚C)
Type
1 : Single
2 : Twin
COIL TEMPERATURE RISE
Test piece : ET1F-B3M1S
100
Coil temperature rise [deg. C]
90
16 V
80
70
60
12 V
50
40
9V
30
20
10
0
0
5
15
10
20
Coil energized time [min.]
Coil saturated temperature rise [deg. C]
100
90
80
70
60
50
40
30
20
10
0
0
0.5
1
Coil energized Power [W]
4
DATA SHEET ER0482EJ1V0DS00
1.5
ET2F/ET1F SERIES
RELAY CHARACTERISTICS DISTRIBUTION (INITIAL)
Samples : ET1F-B3M1S
100 pieces
99.99
Operate voltage
Release voltage
99.9
99
95
90
80
70
50
95
90
80
70
50
CDF (%)
99
30
20
10
5
1
30
20
10
5
1
0.1
0.1
0.01
0.01
0
1
2
3
4
5
6
7
8
9
10
0
1
Operate voltage/Release voltage (V)
99.99
3
4
5
99.99
6
7
8
9
10
Excluding contact bounce
Including contact bounce
99.9
99
99
95
90
80
70
50
95
90
80
70
50
CDF (%)
CDF (%)
2
Operate voltage/Release voltage (V)
Excluding contact bounce
Including contact bounce
99.9
30
20
10
5
1
30
20
10
5
1
0.1
0.1
0.01
0.01
0
1
2
3
4
5
6
7
8
9
10
0
1
2
Operate time (ms)
99.99
3
4
5
6
7
8
9
10
Operate time (ms)
99.99
Excluding contact bounce
Including contact bounce
99.9
Excluding contact bounce
Including contact bounce
99.9
99
99
95
90
80
70
50
95
90
80
70
50
CDF (%)
CDF (%)
100 pieces
99.99
Operate voltage
Release voltage
99.9
CDF (%)
Samples : ET2F-B3M1S
30
20
10
5
1
30
20
10
5
1
0.1
0.1
0.01
0.01
0
5
10
15
20
25
0
Release time (ms)
5
10
15
20
25
Release time (ms)
DATA SHEET ER0482EJ1V0DS00
5
ET2F/ET1F SERIES
Samples : ET1F-B3M1S
99.99
Samples : ET2F-B3M1S
99.99
Normally open contact
Normally close contact
99.9
99
99
95
90
80
70
50
95
90
80
70
50
30
20
10
5
1
30
20
10
5
1
0.1
0.1
0.01
0.01
0
2
4
6
8
0
10
Contact resistance (mΩ)
99.9
99
99
95
90
80
70
50
95
90
80
70
50
CDF (%)
99.99
99.9
CDF (%)
99.99
30
20
10
5
4
6
8
10
30
20
10
5
1
0.1
0.1
0.01
0.01
100
2
Contact resistance (mΩ)
1
150
200
250
300
100
Operate resistance (Ω)
6
100 pieces
Normally open contact
Normally close contact
99.9
CDF (%)
CDF (%)
100 pieces
150
200
Operate resistance (Ω)
DATA SHEET ER0482EJ1V0DS00
250
300
ET2F/ET1F SERIES
DURABILITY LIFE
Mechanical life test
: 20˚C
: 15 Hz (50% duty)
¡ Contact load
: No load
¡ Number of operations
: 10 × 106
¡ Samples
: ET2F-B3M1S 10 pieces
10
10
8
8
Voltage (V)
Voltage (V)
¡ Ambient temperature
¡ Frequency
6
4
4
2
2
0
6
0
1
10
100
1000
0
10000
0
1
1000
Number of operations ( × 10 )
Operate Voltage
Release Voltage
10000
Resistance (mΩ)
100
10
1
0
1
10
100
1000
10000
10
1
0.1
0
1
10
100
1000
Number of operations ( × 103)
Number of operations ( × 103)
Contact Resistance (N.O contact)
Contact Resistance (N.C contact)
10000
300
Resistance (Ω)
Resistance (mΩ)
100
3
100
0.1
10
Number of operations ( × 10 )
3
200
100
0
0
1
10
100
Number of operations ( × 10 )
3
Coil Resistance
DATA SHEET ER0482EJ1V0DS00
7
ET2F/ET1F SERIES
Electrical life test (1)
¡ Ambient temperature
: 125˚C
: 0.2s ON/9.8s OFF, 0.1 Hz
¡ Contact load
: 14 Vdc, 20 A, Power window motor load, locked
¡ Number of operations
: 100 × 103
¡ Samples
: ET2F-B3M1S 10 pieces
10
10
8
8
Voltage (V)
Voltage (V)
¡ Frequency
6
4
2
0
6
4
2
0
1
10
0
100
0
1
3
Number of operations (× 10 )
Number of operations (× 10 )
Operate Voltage
Release Voltage
Resistance (mΩ)
Resistance (mΩ)
100
10
1
0
1
100
10
10
1
0.1
0
1
10
Number of operations (× 103)
Number of operations (× 103)
Contact Resistance (N.O contact)
Contact Resistance (N.C contact)
Resistance (Ω)
300
200
100
0
0
1
10
100
3
Number of operations (× 10 )
Coil Resistance
8
100
3
100
0.1
10
DATA SHEET ER0482EJ1V0DS00
100
ET2F/ET1F SERIES
Electrical life test (2)
¡ Ambient temperature
: 125˚C
: 0.2s ON/9.8s OFF, 0.1 Hz
¡ Contact load
: 14 Vdc, 20 A, Power window motor load, unlocked
¡ Number of operations
: 100 × 103
¡ Samples
: ET2F-B3M1S 10 pieces
10
10
8
8
Voltage (V)
Voltage (V)
¡ Frequency
6
4
2
0
6
4
2
0
1
10
0
100
0
1
Number of operations ( × 10 )
Operate Voltage
Release Voltage
Resistance (mΩ)
100
10
1
0
1
100
10
10
1
0.1
0
1
10
Number of operations ( × 103)
Number of operations ( × 103)
Contact Resistance (N.O contact)
Contact Resistance (N.C contact)
100
300
Resistance (Ω)
Resistance (mΩ)
100
3
100
0.1
10
Number of operations ( × 10 )
3
200
100
0
0
1
100
10
Number of operations ( × 10 )
3
Coil Resistance
DATA SHEET ER0482EJ1V0DS00
9
ET2F/ET1F SERIES
10
DATA SHEET ER0482EJ1V0DS00
ET2F/ET1F SERIES
DATA SHEET ER0482EJ1V0DS00
11
ET2F/ET1F SERIES
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which
may appear in this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other
liability arising from use of such device. No license, either express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its electronic
components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or
injury to persons or property arising from a defect in an NEC electronic component, customers must
incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and antifailure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based
on a customer designated "quality assurance program" for a specific application. The recommended
applications of a device depend on its quality grade, as indicated below. Customers must check the
quality grade of each device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
Similar pages