Gamewell-FCI ET70WP-2475W Cooper-wheelock et series low-profile speakers & speaker strobe Datasheet

Cooper-Wheelock ET Series
Low-Profile Speakers & Speaker Strobes
Features
• ADA/NFPA/UFC/ANSI compliant.
• Meets OSHA 29 Part 1910.165.
• Wall mount models are available with
Description
ET70 Series Speaker Strobe
Cooper-Wheelock’s high performance Series
ET Speakers and Series ET Speaker Strobes
provide high audio output, clear audibility,
dual voltage (25/70 VRMS) capability and field
selectable taps from 1/8 to 8 watts. They are
designed to meet the critical needs of the life
safety industry for effective emergency voice
communications, tone signaling and visible
signaling to alert the hearing impaired.
Field Selectable Candela Settings of
15/30/75/110cd or 135/185cd (MultiCandela models) or 15/75cd (Single
Candela model).
• Ceiling mount models are available with
field selectable candela settings of
15/30/75/95cd or 115/177cd (multicandela models).
• Strobes produce 1 flash per second over
the regulated voltage range.
The low profile design incorporates a speaker
mounting plate for faster and easier installation. Each model has a built-in level adjustment feature and an aesthetic two (2) screw
grille cover.
ET90 Series Speaker Strobe
The Series ET Speaker Strobe models incorporate Low Current draw Series RSS
Strobes.
using filtered DC or unfiltered VRMS input
voltage.
• Synchronize with Cooper-Wheelock SM,
DSM or power supply with built-in Wheelock sync protocol.
• Field selectable taps for 25 or 70 VRMS op-
Strobe options for wall mount models include
15/75 cd or Cooper-Wheelock’s patented
MCW multi-candela strobe with field selectable candela settings of 15/30/75/110cd or
the high intensity MCWH strobe with field
selectable 135/185cd. Ceiling mount models
Multi-Candela Indicator
are available in Cooper-Wheelock’s patented
(bottom of Strobe Lens)
MCC multi-candela ceiling strobe with field
selectable intensities of 15/30/75/95cd or the high intensity MCCH strobe with
field selectable 115/177cd.
The strobe portion of all Series ET Strobes may be synchronized when used
with the Cooper-Wheelock SM, DSM sync modules or any power supply with
patented Cooper-Wheelock Sync Protocol. Cooper-Wheelock’s synchronized
strobes offer an easy way to comply with ADA recommendations concerning
photosensitive epilepsy.
Series ET70 and ET90 Speaker Strobes are UL Listed for indoor use under
Standard 1971 (Signaling Devices for the Hearing Impaired) and Standard 1480
(Speaker Appliances), and use a Xenon flashtube with solid state circuitry enclosed in a rugged Lexan® lens to provide maximum reliability for effective visual
signaling. All inputs are supervised and employ IN/OUT wiring terminals for fast
installation using 12 to 18 AWG wiring.
Color options for Series ET speakers and speaker strobes are red or white.
Cooper-Wheelock’s Weatherproof Low Profile Speaker Strobe, Series ET70WP2475W-FR appliance has an extended temperature range of -31° F to 150° F
(-35° C to 66° C) that will satisfy virtually all outdoor and severe environment
applications.
The strobe has a 75 candela intensity on axis at 31°F (-35°C) and 180cd at 77°F
(25°C) with low current draw. For outdoor applications, the ET70WP-2475W-FR
must be wall mounted to a Weatherproof Back Box (IOB).
ET Low Profile Speakers & Strobes
• 24 VDC with wide UL “Regulated Voltage”
CS-2240 09/01/06
Page 1 of 4
eration from 1/8 watt to 8 watts.
• High efficiency design for maximum output
at minimum wattage across a frequency
range of 400 to 4000 HZ.
• Fast installation with IN/OUT screw terminals using 12 to 18 AWG wires.
Listings
Listings and approvals below apply to the
basic ET Series Low Profile Speakers and
Speaker Strobes. In some cases, certain
modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: files S2652 (Speakers), S2652/
S5391 (Strobe/Speakers)
• MEA Listed. file 151-92-E Vol. XXI
• CSFM approved: files 7135-0785:135,
7125-0785:146, 7125-0785:152
General Notes
• Strobes are designed to flash once per second minimum over their “Regulated
Voltage Range”. Note that NFPA-72 specifies a flash rate of 1 to 2 flashes per
second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
• All candela ratings represent min. effective Strobe intensity per UL Standard 1971.
• Series ET Speaker Strobes and Series ET Speakers are listed under UL Standard 1971 for indoor use with a temperature range of 32°F to 120°F (0°C to 49°
C) and maximum humidity of 85%.
• Cooper-Wheelock Weatherproof Appliances are designed to operate over an
extended temperature of of -31° F to 150°F (-35°C - 66°C) and all candela ratings represent minimum effective strobe intensity based on UL 1638. Maximum
humidity of 93% RH + 2%
• “Regulated Voltage Range” is the newest terminology used by UL to identify
voltage range. Prior to this change, UL used the term, “Listed Voltage Range”.
Engineer’s Specifications
The speaker appliances shall be Cooper-Wheelock Series ET Speakers and
speaker strobe appliances shall be Cooper-Wheelock Series ET Speaker Strobes
or approved equals. The speakers shall be UL Listed under Standard 1480 for Fire
Protective Service and speakers equipped with strobes shall be listed under UL
Standard 1971 for Signaling Devices for the Hearing-Impaired. In addition, the
strobes shall be certified to meet the requirements of FCC Part 15, Class B.
All speakers shall be designed for a field selectable input of either 25 or 70 VRMS,
with selectable power taps from 1/8 watt to 8 watts. All models shall have listed
sound output of up to 93 dB at 10 feet and a listed frequency response of 400 to
4000 Hz. The speaker shall also incorporate a sealed back construction. All inputs
shall employ terminals that accept #12 to #18 AWG wire sizes.
The strobe portion of the appliance produces a flash rate of one (1) flash per second over the Regulated Voltage Range and incorporates a Xenon flashtube enclosed in a rugged Lexan® lens. The strobe is of low current design. If, MultiCandela Speaker Strobes are specified, the strobe intensity has field selectable
settings and is rated per UL Standard 1971 at 15/30/75/110cd or 135/185cd for
wall mount and 15/30/75/95 cd or 115/177cd for ceiling mount. The selector switch
for the candela is tamper resistant. The 15/75 strobe is specified when 15 candela
UL Standard 1971 listing with 75 candela on-axis is required (ADA compliance).
When synchronization is required, the strobe portion of the appliance is compatible
with Cooper-Wheelock’s SM, DSM sync modules or power supply with built-in Cooper-Wheelock Patented Sync Protocol. The strobes do not drift out of synchronization during operation. If the sync module or Power Supply fails to operate,
(i.e.,contacts remain closed), the strobe reverts to a non-synchronized flash rate.
The speaker and speaker strobe appliances shall be designed for indoor surface or
flush mounting. The speaker and speaker strobe incorporates a speaker mounting
plate with a grille cover which is secured with two screws for a level, aesthetic finish and shall mount to standard electrical hardware requiring no additional trimplate
or adapter. The finish of the Series ET speakers and speaker strobes shall be
white or red plate. All speakers and speaker strobes shall be backward compatible.
Cooper-Wheelock products must be used within their published specifications and
must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with their installation instructions at the time of installation and at least twice a year or more often and in accordance with local, state
and federal codes, regulations and laws. Specification, application, installation,
operation, maintenance and testing must be performed by qualified personnel for
proper operation in accordance with all of the latest National Fire Protection Association (NFPA), Underwriters’ Laboratories (UL), National Electrical Code (NEC),
Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and other applicable building and fire standards, guidelines,
regulations, laws and codes including, but not limited to, all appendices and
amendments and the requirements of the local authority having jurisdiction (AHJ).
ET Low Profile Speakers & Strobes
CS-2240 09/01/06
Page 2 of 4
WARNING: CONTACT COOPER-WHEELOCK
FOR THE CURRENT “INSTALLATION INSTRUCTIONS” AND “GENERAL INFORMATION” SHEET (P82380) ON THESE PRODUCTS.
THESE DOCUMENTS UNDERGO PERIODIC
CHANGES. IT IS IMPORTANT THAT YOU HAVE
CURRENT INFORMATION ON THESE PRODUCTS. THESE MATERIALS CONTAIN IMPORTANT INFORMATION THAT SHOULD BE READ
PRIOR TO SPECIFYING OR INSTALLING
THESE PRODUCTS, INCLUDING:
•
TOTAL CURRENT REQUIRED BY ALL APPLIANCES CONNECTED TO SYSTEM SECONDARY POWER SOURCES.
•
USE RATINGS ON NOTIFICATION APPLIANCE CIRCUITS TO HANDLE PEAK CURRENTS FROM ALL APPLIANCES ON THOSE
CIRCUITS.
•
COMPOSITE FLASH RATE FROM MULTIPLE
STROBES WITHIN A PERSON’S FIELD OF
VIEW.
•
ADDING, REPLACING OR CHANGING APPLIANCES OR CHANGING CANDELA SETTINGS WILL AFFECT CURRENT DRAW.
RECALCULATE CURRENT DRAW TO INSURE THAT THE TOTAL AVERAGE CURRENT AND TOTAL PEAK REQUIRED BY ALL
APPLIANCES DO NOT EXCEED THE RATED
CAPACITY OF THE POWER SOURCES OR
FUSES.
•
THE VOLTAGE APPLIED TO THESE PRODUCTS MUST BE WITHIN THEIR
“REGULATED VOLTAGE RANGE”.
•
INSTALLATION OF 110 CANDELA STROBE
PRODUCTS IN SLEEPING AREAS.
•
INSTALLATION IN OFFICE AREAS AND
OTHER SPECIFICATION AND INSTALLATION ISSUES.
•
USE STROBES ONLY ON CIRCUITS WITH
CONTINUOUSLY APPLIED OPERATING
VOLTAGE. DO NOT USE STROBES ON
CODED OR INTERRUPTED CIRCUITS IN
WHICH THE APPLIED VOLTAGE IS CYCLED
ON AND OFF AS THE STROBES MAY NOT
FLASH.
•
FAILURE TO COMPLY WITH THE INSTALLATION INSTRUCTIONS OR GENERAL INFORMATION SHEETS COULD RESULT IN IMPROPER INSTALLATION, APPLICATION,
AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION,
WHICH COULD RESULT IN PROPERTY
DAMAGE AND SERIOUS INJURY OR DEATH
TO YOU AND/OR OTHERS.
•
CONDUCTOR SIZE (AWG), LENGTH AND
AMPACITY SHOULD BE TAKEN INTO CONSIDERATION PRIOR TO DESIGN AND INSTALLATION OF THESE PRODUCTS, PARTICULARLY IN RETROFIT INSTALLATIONS.
Wiring Diagram
SERIES EP SPEAKER & STROBE
OPERATE INDEPENDENTLY
(NON-SYNC OR SYNC)
FROM
PRECEDING
APPLIANCE
OR VOICE
EVACUATION
PANEL
+
+
-
-
+
-
FROM
PRECEDING
STROBE,
SYNC MODULE,
POWER SUPPLY
OR FACP
+
+-
+-
STROBE
SPEAKER
TO NEXT
APPLIANCE
OR EOLR
TO NEXT
STROBE OR
EOLR
DSM #1
Strobe NAC Cir.
SERIES EP SPEAKER STROBES
SYNCHRONIZED WITH MULTIPLE
DSM MODULES
Note: Figure shows interconnection to strobe through sync
module. Speaker portion requires 2 separate conductors to
FACP.
F
A
C
P
Sync
+
-
ET
ET
ET
ET
ET
ET
DSM #2
Strobe NAC Cir.
Sync
+
DSM #3
Sync
Strobe NAC Cir.
+-
DSM Interconnecting wiring shown. Maximum of
twenty (20)
STROBE
NAC
CIRCUIT
OUT
SERIES ET SPEAKER STROBE
APPLIANCES SYNCHRONIZED WITH
DSM MODULE SINGLE CLASS “A”
DSM
SYNC
+
-
+OUT 1
+ IN 1
ET
ET
ET
ET
ET
ET
MINUS 1
+
AUDIBLE
-
FACP
MINUS 2
+ IN 2
STROBE
NAC
CIRCUIT
RETURN
ET Low Profile Speakers & Strobes
CS-2240 09/01/06
+ OUT 2
Page 3 of 4
NOTE: All CAUTIONS and WARNINGS are identified by the symbol . All warnings are printed in bold capital letters.
PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS OR WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE
PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY
OR DEATH TO YOU AND/OR OTHERS.
Ordering Information
S T RO BE
C A NDEL A
NO NS Y NC
S Y NC
W /S M ,
M O DEL
C OL OR
WALL/
C EIL ING
M O UNT ING
O P T IO NS **
UL
ET7 0 - 2 4 MCW - FR
1 5 /3 0 /7 5 /1 1 0
X
ET7 0 - 2 4 MCW - FW
1 5 /3 0 /7 5 /1 1 0
X
X
Re d
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
X
W h ite
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
ET7 0 - 2 4 1 5 7 5 W - FR
1 5 ( 7 5 o n a x is )
X
X
X
Re d
W a ll
L ,O ,P,Q ,U,Y
X
X
X
*
X
ET7 0 - 2 4 MCW H- FR
ET7 0 - 2 4 MCW H- FW
1 3 5 /1 8 5
X
X
Re d
W a ll
L ,O ,P,Q ,U,Y
X
*
*
*
*
1 3 5 /1 8 5
X
X
W h ite
W a ll
L ,O ,P,Q ,U,Y
X
*
*
*
*
ET7 0 W P- 2 4 7 5 W
75
X
X
Re d
W a ll
M
X
X
X
*
*
ET9 0 - 2 4 MCC- FW
1 5 /3 0 /7 5 /9 5
X
X
W h ite
Ce ilin g
L ,Q ,U,V ,Y
X
*
X
*
*
1 1 5 /1 7 7
X
X
W h ite
Ce ilin g
L ,Q ,U,V ,Y
X
*
*
*
*
-
-
-
L ,O ,P,Q ,U,Y
X
X
X
*
X
-
-
-
L ,O ,P,Q ,U,Y
X
X
X
*
X
M O DEL
ET9 0 - 2 4 MCCH- FW
ET7 0 - R
ET7 0 - W
W a ll/
Ce ilin g
W a ll/
Ce ilin g
Re d
Nic ke l
A G ENC Y A P P RO V A L S
M EA C S FM
FM
BFP
X
TABLE 1: AVERAGE RMS CURRENT*
ET70/ET90
SPEAKER
STROBES
16 vdc
24 vdc
33 vdc
ET70 STROBE CURRENT - WALL MOUNT
241575W
15/75cd
0.101
0.064
0.047
24MCW
15cd
0.062
0.041
0.032
30cd
0.102
0.065
0.047
ET90 STROBE CURRENT - CEILING MOUNT
24MCWH
75cd
0.192
0.116
0.081
110cd
0.265
0.155
0.107
135cd
0.300
0.195
0.145
24MCC
185cd
0.420
0.270
0.190
15cd
0.068
0.045
0.035
30cd
0.112
0.072
0.052
75cd
0.211
0.128
0.089
24MCCH
95cd 115cd
0.292 0.300
0.171 0.195
0.118 0.145
177cd
0.420
0.270
0.190
* Average RMS Current is per UL average RMS method and Average Mean Current is per UL average mean method. For rate In
Rush and Peak current across the UL listed voltage range for both filtered DC and unfiltered VRMS (FWR).
** Refer to mounting options data sheet.
Table 3: UL Listed Model and Candela Strobe Rating
TABLE 2: ET70/ET90 UL REVERBERANT dBA @ 10 Feet**
1/8
1/4
1/2
1
2
4
8
ET Speaker
w atts
78.3
81.5
84.4
87.2
90.1
92.8
94.9
ET Speaker Strobe
78.3
81.5
84.4
87.2
90.1
92.8
94.9
77
80
83
86
88
91
93
ET70WP-2475W
***dBA ratings based on UL testing under UL
Standard 1480
Voltage
*Rated
Average
Currenty
16.0VDC
0.150
24.0 VDC
0.102
33.0 VDC
0.085
Rated Strobe Candela (cd)
@ 77°F (25C)
@ -31°F
(-35C)
180cd
75cd
* Average current per actual Cooper-Wheelock production testing. For
rated average peak and inrush current across the UL Listed voltage
range for both filtered DC and unfiltered VRMS, see Installation Instructions.
SM Sync Module is rated for 3.0 amperes
@ 24 VDC.
S Y N C M OD E LS / P OWE R S UP P LY
M OD E L
N UM B E R
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
IN P UT
VOLT A GE
(V D C )
A V E R A GE
M EA N
C UR R E N T
@ 24 V D C
M OUN T IN G
OP T ION S
SM -12/24-R
24
.028
W
DSM -12/24-R
24
.035
W
DSM Sync Module is rated for 3.0 amperes per circuit. The maximum number
of interconnected DSM modules is twenty
(20). Refer to Data Sheet S3000 or Installation Instructions P83123 for SM and
P83177 for DSM.
Specifications and wiring information are provided for information only and are believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation. For more
information, contact Gamewell-FCI.
Page 4 of 4
ET Low Profile Speakers & Strobes CS-2240
09/01/06
Similar pages