EVALSPEAr320HMI EVALSPEAr320HMI SPEAr320 expansion board for HMI applications Data brief Features Application board ■ 1 x Ethernet RJ45 connector (ST802RT1A) ■ 1x LCD interface for 5.7” 640x480 EDT screen (ET057010DHU) ■ 1x Unified LCD interface (EDT displays with Unified interface) ■ 1x Resistive touch screen interface (STMPE811) ■ 2 x CAN DB9 plug connectors ■ 3 x RS232 DB9 plug connectors (ST3232EBTR) ■ Onboard temperature sensor and potentiometer (STMPE811) ■ 64 Kbit dual interface EEPROM: ISO 15693 and ISO 18000-3 mode 1 compliant contactless interface + I2C (M24LR64) ■ 4 Gb NAND flash memory ■ PWM mono audio output ■ Analog extension connector featuring 8 ADC lines ■ General purpose extension connector with GPIOs and I2C functionality ■ Unified Power Line modem (PLM) connector ■ Raisonance Primer2 extension boards interface connector ■ DC/DC converter L7986A (+24V/+5V) ■ MicroSDcard socket ■ 4 LEDs ■ 2 general purpose buttons ■ System reset button CPU board Description The SPEAr320HMI expansion board is intended to be used in conjunction with a SPEAr320 CPU board(a) to evaluate the SPEAr320 microprocessor with a variety of devices, especially in its SMII automation networking mode. a. Sold separately, order code EVALSPEAR320CPU April 2011 Doc ID 018697 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 EVALSPEAr320HMI Revision history Table 1. 2/3 Document revision history Date Revision 12-Apr-2011 1 Changes Initial release Doc ID 018697 Rev 1 EVALSPEAr320HMI Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 018697 Rev 1 3/3