Light Touch Switches/EVQPL 4.9 mm Square SMD Light Touch Switches Type: EVQPL ■ Features ■ Recommended Applications ● External dimensions : 4.9 mm҂4.9 mm, ● Operation switches for portable electronic equipment Height: 0.8 mm(Without push plate), 1.5 mm(With push plate) (Notebook PC, Camcorders, Portable audio players, etc.) ● Operation switches for car audio systems ■ Explanation of Part Numbers 1 2 3 4 5 E V Q P L Product Code 6 7 8 9 A Type Height ■ Product Chart Height H=0.8 mm H=1.5 mm (With Push Plate) Embossed Embossed Packaging Operating Force 1.0 N EVQPLB EVQPLD 1.6 N EVQPLF EVQPLH 2.6 N EVQPLK EVQPLM ■ Specifications Type Snap action/Push-on type SPST Rating 10 µA 2 Vdc to 20 mA 15 Vdc (Resistive load) Contact Resistance Electrical 50 m액 max. Insulation Resistance 50 M액 min. (at 100 Vdc) Dielectric Withstanding Voltage 250 Vac for 1 minute 3 ms max. (ON) 8 ms max. (OFF) Bouncing Operating Force Mechanical 1.0 N±0.5 N 1.6 N±0.5 N Travel Endurance Operating Life 2.6 N±0.6 N 0.25 mm +0.10 –0.20 mm 500000 cycles min. Operating Temperature 200000 cycles min. –20 °C to +70 °C –40 °C to +85 °C (Bulk) –20 °C to +60 °C (Taping) Storage Temperature Minimum Quantity/Packing Unit 5000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 25000 pcs. Note: Non washable Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES80 – 00 Sep. 2010 Light Touch Switches/EVQPL ■ Dimensions in mm (not to scale) No. 1 Be careful not to scratch the film A 0.3 B 2 φ3. 0.2 4.9 4.6 Surface mount For reflow soldering Without push plate A' B' Operating part 1.2 3.7 4.6 4.9 0.4 0.8 (5.5) (4.6) 4.3 3.1 A (1) GND B 3.4 5.4 (Embossed Taping) 0.45 0.05 2.5 5.0±0.5 EVQPLB EVQPLF EVQPLK A’ PWB land pattern for reference Operating Force 1.0 N 1.6 N 2.6 N φ4 4 B φ2. Operating part Operating Life 500000 cycles 500000 cycles 200000 cycles 0.45 0.05 A’ B’ φ4 .4 2.5 5±0.5 0.4 0.8 1.2 1.5 +– 0.2 0.1 (5.5) (4.6) 4.3 3.1 A (1) GND 1.2 3.7 4.6 4.9 B 3.4 5.4 Surface mount For reflow soldering With push plate 0.2 (3.4) (3.8) 4.9 4.6 (Embossed Taping) A Height 0.8 mm 0.8 mm 0.8 mm 0.3 EVQPLD EVQPLH EVQPLM φ2.2 Part Numbers EVQPLBA08 EVQPLFA08 EVQPLKA08 No. 2 B’ Circuit diagram A’ PWB land pattern for reference Part Numbers EVQPLDA15 EVQPLHA15 EVQPLMA15 Operating Force 1.0 N 1.6 N 2.6 N B’ Circuit diagram Height 1.5 mm 1.5 mm 1.5 mm Operating Life 500000 cycles 500000 cycles 200000 cycles Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES81 – 00 Sep. 2010 Light Touch Switches/EVQPL ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. 230 180 Tape width=12.0 mm t1 150 Feeding hole Chip pocket P2 P0 E φD0 F W A B Operation Top (°C) MAX. 260 (Normal Temp.) 90±30 40±10 t2 P1 Chip component Tape running direction Soldering Time (s) Unit: mm Part No. Height A B W F E P1 P2 P0 D0 Dia. EVQPL 0.8/1.5 5.0±0.2 5.0±0.2 12.0±0.3 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5 –0 Item A t1 +0.1 t2 0.35±0.05 1.0/1.7±0.2 ● Standard Reel Dimensions in mm (not to scale) T B C Rate (mm) φ370.0±2.0 φ50.0 min. φ13.0±0.5 E C Item W E 2.0±0.5 T t r — 1.0 to 3.0 1.0±0.5 B Rate (mm) 14.0±1.5 D φ21.0±1.0 D r A W ■ Recommended Shape of Test Pole t ■ Recommended Operating Conditions for Reflow soldering type 0.3 mm max. Test pole φ1.0 Leaning angle range 90 °±4 ° (vertical direction) Switch Mounting surface R0.2±0.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES82 – 00 Sep. 2010