Vectron EX-381-DAD-107-G-10.000 4 pin dip & smd evacuated miniature crystal oscillator Datasheet

Product Data Sheet
EX-380 Series
4 Pin DIP & SMD Evacuated Miniature Crystal Oscillator
EMXO™
Features
• Supply Voltage: 3.3 Vdc or 5 Vdc
• Aging: <1x10-9 /day, <1x10-7 /year (@ 10 MHz)
• Temperature Stability: to ±7.5x10-8 over -20°C to +70°C
• Acceleration Sensitivity: 1 x10-9/g, Total Gamma
• Uses SC Family 3rd Overtone Crystal
• Low Power Consumption: <0.35 watts @ +25°C
• Frequencies: 10 to 80 MHz for HCMOS or Sinewave outputs
• Fast Warm-up: 1 to 2 minutes
• Patented Technique*
Applications
• SONET/SDH, DWDM, FDM, ATM, 3G
• Telecom Transmission and Switching Equipment
• Wireless Communication Equipment
• Military Airborne and Mobile systems
Description
The model EX-380 Series is a low profile DIP or SMD, Evacuated
Miniature Oven Controlled Crystal Oscillator (EMXO),
available in frequencies from 10 MHz to 80 MHz.
Notes: 1. We acknowledge the support
of the U.S. Army for work on resonators
associated with this product under
contract #1 X66001 - 97-C-8635.
*U.S. Patent 5,917,272.
The EX-380 Series provides exceptionally low aging rates and high
temperature stabilities in an extremely small package over a
wide range of environmental conditions. The through hole
unit measures only 20.8mm x 13.2mm x 7.6mm (0.82" x
0.52" x 0.30"), @ 10 MHz provides aging rates of <1x109/day average, <1x10-7 for the first year and <1x10-6 for 10
years with temperature stabilities to ±1x10-7 over -40°C to
+85°C. Wider temperature ranges are available from -55°C to
+85°C. This is achieved by the application of new resonator
design concepts and technological breakthroughs. This
series of EMXO's bridges the gap between current large,
high precision OCXO's and smaller TCXO'S. The EX-380
Series becomes the most economical choice where there is
a need for spectral purity, short and long term stability, along
with small size and dramatically reduced power consumption.
Standard supply voltages for the EX-380 series are 3.3 Vdc and 5Vdc,
with HCMOS or Sinewave output options. A surface mount
version of this oscillator is available (EX-381/5). Sinewave
output is only available in the surface mount, EX-381, version.
EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator
Performance Characteristics for frequencies in the range 10 to 20.48 MHz
Parameter
Characteristics
Available Frequencies
10 to 20.48 MHz (See Page 6 for specific Freq's)
Size
See page 4 for outline Drawings and Dimensions
Supply Voltage
(C)
(D)
5.0 Vdc ±5%
3.3 Vdc ±5%
Supply Current (Steady State)
< 70 mA @ +25°C and 5 Vdc , <90 mA @+25C and 3.3Vdc
<120 mA @ -40°C and 5 Vdc, <150 mA @-40C and 3.3Vdc
Turn-on current
300 mA maximum @ 5.0 Vdc , 450 mA maximum @ 3.3V
Output Type
Levels
Symmetry (at 50% Vdd)
Rise/Fall Time (10%-90%)
Stability vs. Temperature
NOTE: Tighter stabilities and
wider temperature ranges
are available, please consult
the factory.
(A)
(G or H) Sinewave into 50 ohms
HCM0S,
(A) <0.4 Volts, >0.9 Vdd,
(G) 0 dBm,
(H) +3 dBm
(A) 50/50 ±10%
(A) <7 ns
D-107 = ±0.1 ppm over -20°C to +70°C
D-ST3 = Stratum 3 over -20°C to +70°C
F-ST3 = Stratum 3 over -40°C to +85°C
F-107 = ±0.1 ppm over -40°C to +85°C
x-ST3 = Stratum 3 Holdover stability per GR-1244-CORE
280 ppm pk-pk over temperature, < 40 ppb drift.
Aging
(10 MHz Typical)
<1 x 10-9/day average, <1 x 10-7 / year,
<1 x 10-6 /10 years
Short -Term Stability (Allan Deviation)
<5 x 10-10, 0.1 seconds to 10 seconds
Phase Noise (Static Conditions)
Frequency vs. Supply
Warm-up (Restabilization)
(frequency relative to that 1 hour after turn-on,
following 24 hours off time, at +25°C)
Electrical Frequency Adjust
Initial Accuracy for Fixed Frequency
Acceleration Sensitivity
(10 MHz)
Offset
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
PhaseNoise
-100 dBc/Hz
-130 dBc/Hz
-140 dBc/Hz
-145 dBc/Hz
-150 dBc/Hz
<2.5 x 10-9 per percent change
Standard
60 seconds
120 seconds
< ±1 x 10-6
< ±1 x 10-7
Optional (consult factory)
45 seconds
90 seconds
A: >±1 ppm range with 0 to Vdd input voltage
F: ±1 ppm @ +25°C
1 x 10-9/g Total Gamma, standard
10
(5 x 10- /g available at 10 MHz consult factory)
Vectron International • 267 Lowell Road, Hudson, NH 03051
2
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator
Performance Characteristics for frequencies in the range 20.5 to 80 MHz
Parameter
Available Frequencies
Size
Supply Voltage
Characteristics
20.5 to 80 MHz (See Page 6 for specific Freq's)
See page 4 for outline Drawings and Dimensions
(C)
(D)
5.0 Vdc ±5%
3.3 Vdc ±5%
Supply Current (Steady State)
< 70 mA @ +25°C and 5 Vdc, <90 mA @+25C and 3.3Vdc
<120 mA @ -40°C and 5 Vdc, <150 mA @-40C and 3.3Vdc
Turn-on current
300 mA maximum @ 5.0 Vdc, 450 mA maximum @ 3.3V
Output Type
Levels
HCM0S,
(A)
(G or H) Sinewave into 50 ohms
(A)<0.4 Volts, >0.9 Vdd
Symmetry (at 50% Vdd)
(A)
50/50 ±10%
Rise/Fall Time (10-90%)
(A)
<5 ns
Stability vs. Temperature
NOTE: Tighter stabilities and wider
temperature ranges are available,
please consult the factory.
(G) 0 dBm,
(H) +3 dBm
D-ST3 = Stratum 3 over -20°C to +70°C
D-107 = ±0.1 ppm over -20°C to +70°C (< 50 MHz)
F-507 = ±0.5 ppm over -40°C to +85°C
F-147 = ±0.14 ppm over -40°C to +85°C (<50 MHz)
x-ST3 = Stratum 3 Holdover stability per GR-1244-CORE.
280 ppm pk-pk over temperature, <40 ppb drift.
Aging (38.88 MHz Typical)
Short Term Stability (Allan Deviation)
Phase Noise (Static Conditions)
Frequency vs. Supply
Warm-up (Restabilization)
(frequency relative to that 1 hour after turn-on,
following 24 hours off time, at +25°C)
Electrical Frequency Adjust
Initial Accuracy for Fixed Frequency
Acceleration Sensitivity
<3 x 10-9/day average, <3 x 10-7 / year, <3 x 10-6 /10 years
<5 x 10-10, 0.1 seconds to 10 seconds
Offset
Phase Noise
10 Hz
-80 dBc/Hz
100 Hz
-110 dBc/Hz
1 kHz
-130 dBc/Hz
10 kHz
-135 dBc/Hz
100 kHz
-140 dBc/Hz
<2.5 x 10-9 per percent change
< ±1 x 10-6
Standard
60 seconds
Optional (consult factory)
45 seconds
< ±1 x 10-7
120 seconds
90 seconds
A: >±3 ppm range with 0 to Vdd input voltage
F: ±1.5 ppm @ +25°C
1 x 10-9/g Total Gamma, standard
Vectron International • 267 Lowell Road, Hudson, NH 03051
3
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator
Outline Drawing
Marking
380 Package
7.62 MAX
(.30 MAX)
5.08 MIN
(.20 MIN)
Standoff’s
3 places at
pins.
0.457 DIA
(.018 DIA)
Square Corner Pin 1
20.83
(.82)
3.81
(.15)
7.63
(.30)
Gnd Pin
No Standoff
1
7
14
8
2.54
(.10)
CL
13.21
(.52)
Pin
1
7
8
14
Function
Frequency Adjust *
GND, Case
Output
Supply
Pin Numbers do not appear on the unit.
* Pin 1 is the Oven Alarm with option G.
15.24
(.60)
Marking
381(ht= 0.4") ,385 (ht=0.35") Package
Square Corner Pin 1
(0.35" :385, 0.4": 381)
4 PLACES 0.635 MAX
(.025 MAX)
1.016 DIA
(.040 DIA)
1.727
(.068)
2.54
(.100)
2
1
12.70
(.50)
2.54
(.100)
Function
Frequency Adjust*
GND, Case
Output
Supply
Pin Numbers do not appear on the unit.
* Pin 1 is the Oven Alarm with option G.
3
4
Pin
1
2
3
4
15.24
(.600)
20.32
(.80)
Vectron International • 267 Lowell Road, Hudson, NH 03051
4
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator
Temperature ( º C)
Recommended Reflow Profile
pre-heating
60 to 90 sec.
@ 140ºC to 160ºC
reflow
40 to 60 sec.
@ >183ºC
Note: EMXO's are precision subsystems with tolerances measured to ±0.001 ppm. The EX-381/5
series has been designed for pick and place reflow soldering. The suggested reflow profile is
shown above. The EX-381/5 may be reflowed one time in the non-inverted state. VI recommends
waiting at least two hours after reflow before measuring the unit.
Handling Precautions
Although protection circuitry has been designed into
this device, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. VI employs a human-body
model (HBM) and a charged-device model (CDM) for
ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the
circuit parameters used to define the mode. Although
no industry-wide standard has been adopted for the
CDM, a standard HBM (resistance = 1500 ohms,
capacitance = 100pf) is widely used and therefore can
be used for comparison purposes. The HBM ESD
threshold presented here was obtained by using these
circuit parameters.
ESD Threshold Voltage
Model
Threshold
Unit
Human-Body (HBM)
500
V min
Charged-Device
500
V min
Vectron International • 267 Lowell Road, Hudson, NH 03051
5
• Tel: 1-88-VECTRON-1 • Web: www.vectron.com
EX-380 Evacuated Miniature Oven Controlled Crystal Oscillator
Ordering Information
EX
380
D A F
ST3
A
12.800
MHz
Output Frequencies
10.000 MHz
19.440 MHz
77.760 MHz
10.230 MHz
20.000 MHz
80.000 MHz
12.800 MHz
20.480 MHz
13.000 MHz
38.880 MHz
16.384 MHz
40.000 MHz
Consult with Factory about
availability of frequencies not listed.
Package
380 = Thru Hole
381,385 = SMD
Supply Voltage
C: +5 Vdc ± 5%
D: +3.3Vdc ± 5%
Output Type
A = HCMOS,G*=0 dBm, H*=+3 dBm/ 50 ohms (*=381 only)
Other Options
A = Standard, No Options (Default)
F = Fixed Frequency, No Frequency Adjust
G= Fixed Frequency Option & Oven Alarm Option.
Temperature & Stability
D-107 = ±0.1 ppm over -20°C to +70°C (<50 MHz)
D-ST3 = Stratum 3
over -20°C to +70°C
F-507 = ±0.5 ppm
over -40°C to +85°C
F-147 = ±0.14 ppm
over -40°C to +85°C (<50 MHz)
NOTE: Tighter stabilities and wider temperature
ranges are available, please consult the factory.
Note: Oven Alarm (into 10k ohm load):
Normal: > 0.8Vdd , Error: <0.1Vdd
Oven alarm is not available when EFC is
specified.
Visit our website at www.vectron.com
For additional information please contact:
www.vectron.com
USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
EUROPE: In Denmark, Finland, Ireland, Israel, Norway, Spain, UK . . . . . . . Tel: 49(0)3328 4284 17
Austria, Belgium, France, Germany, Italy, Luxembourg
Netherlands, Sweden, Switzerland, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASIA: In China, Taiwan, Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: + 86 21 28909740 /41 /42
Korea, Singapore, Australia, India . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
©2001, Vectron International.
Rev.2May03
Similar pages