MORNSUN F1205M/N-1W Single output dc-dc converter Datasheet

F_M-1W & F_N-1W Series
1W, FIXED INPUT, ISOLATED & UNREGULATED
SINGLE OUTPUT DC-DC CONVERTER
Multi-country patent protection RoHS
FEATURES
PRODUCT PROGRAM
High Efficiency up to 79%
3000VDC Isolation
Temperature Range: -40°C to+85°C
No Heatsink Required
No External Component Required
Internal SMD construction
Industry Standard Pinout
RoHS Compliance
Input
Part
Number
output
Voltage (VDC)
Nominal
Range
3.3
3.0-3.6
F0303M -1W
Voltage
(VDC)
The F_M-1W & F_N-1W Series is specially
Max
Packge
style
3.3
300
30
70
SIP
5
200
20
73
SIP/DIP
F0503M/N -1W
3.3
300
30
71
SIP/DIP
F0505M/N -1W
5
200
20
69
SIP/DIP
9
111
12
76
SIP/DIP
12
83
9
78
SIP/DIP
5
4.5-5.5
F0512M/N -1W
designed for applications where a group of polar
Min
Efficiency
(%, Typ)
F0305M/N -1W
F0509M/N -1W
APPLICATIONS
Current (mA)
F0515M/N -1W
15
67
7
78
SIP/DIP
F1203M/N -1W *
3.3
300
30
74
SIP/DIP
5
200
20
71
SIP/DIP
F1205M/N -1W
10.8-13.2
9
111
12
74
SIP/DIP
power supply in a distributed power supply
F1212M/N -1W
12
83
9
78
SIP/DIP
system on a circuit board.
F1215M/N -1W
15
67
7
79
SIP/DIP
These products apply to:
F2405N -1W
5
200
20
72
DIP
F2409N -1W
9
111
12
77
DIP
12
83
9
77
DIP
power supplies are isolated from the input
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
F1209M/N -1W
12
F2412N -1W *
24
21.6-26.4
and output (isolation voltage ≤3000VDC);
F2415N -1W
15
67
7
79
DIP
3) Where the regulation of the output voltage
F2424N -1W
24
42
3
78
DIP
and
the
output
ripple
noise
are
not
* Designing.
demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
ISOLATION SPECIFICATIONS
Item
Test conditions
Min
Isolation voltage
Tested for 1 minute and 1 mA max
3000
Isolation resistance
Test at 500VDC
1000
Typ
MΩ
60
pF
COMMON SPECIFICATIONS
Rated Po wer
Pack age Styl e
Ou tput Vol tage
In pu t Voltage
Prod uct Seri es
Item
Test conditions
Min
Typ
Storage humidity
Units
95
%
-40
85
Storage Temperature
-55
125
Lead temperature
MORNSUN Science & Technology co.,Ltd.
Max
Operating Temperature
Temp. rise at full load
Address: 2th floor 6th building, Hangzhou
Industrial District, Guangzhou, China
Tel: 86-20-38601850
Fax: 86-20-38601272
http://www.mornsun-power.com
Units
VDC
Isolation Capacitance
MODEL SELECTION
F0505N-1W
Max
15
1.5mm from case for 10 seconds
°C
30
300
Short circuit protection*
1
Cooling
S
Free air convection
Case material
Plastic (UL94-V0)
MTBF
3500
K hours
Weight
4.3
g
*Supply voltage must be discontinued at the end of short circuit duration.
MORNSUN reserves the copyright
Specifications subject to change without notice.
F_M-1W & F_N-1W
A/1-2008
Page 1 of 2
OUTPUT SPECIFICATIONS
Item
APPLICATION NOTE
Test conditions
Min
Output power
Typ
Max
Units
1
W
0.1
10% to 100%
load
Load regulation
load is not less than 10% of the full load, and that
±1.2
(3.3V output)
15
20
(5V output)
10
15
(9V output)
8.3
15
(12V output)
6.8
15
(15V output)
6.3
15
(24V output)
6.0
15
Output voltage accuracy
and reliably, During operation, the minimum output
±1.5
For Vin change (3.3V output)
of ±1%
(others output)
Line regulation
this product should never be operated under
no load! If the actual output power is very small,
please connect a resistor with proper resistance at
%
100% full load
Ripple& Noise*
20MHz Bandwidth
100
Switching frequency
Full load, nominal input
100
the output end in parallel to increase the load, or
use our company’s products with a lower rated
output power.
See tolerance envelope graph
Temperature drift
Requirement on output load
To ensure this module can operate efficiently
0.03
%/°C
150
mVp-p
Recommended circuit
If you want to further decrease the input/output
ripple, an “LC” filtering network may be connected
to the input and output ends of the DC/DC
converter, see (Figure 1).
KHz
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing
of Power Converter section, application notes.
Note:
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated
output load unless otherwise specified.
2. See below recommended circuits for more details.
L
L
+Vo
Vin
DC DC
Cin
Cout
GND
0V
(Figure 1)
It should also be noted that the inductance and
the frequency of the “LC” filtering network should
TYPICAL CHARACTERISTICS
be staggered with the DC/DC frequency to avoid
mutual interference. However, the capacitance of
the output filter capacitor must be proper. If the
capacitance is too big, a startup problem might
arise. For every channel of output, provided the
safe
and reliable operation is
ensured,
the
recommended capacitance of its filter capacitor
sees (Table 1).
Operating Temp.(oC)
OUTLINE DIMENSIONS & PIN CONNECTIONS
First An gle Projection
FXXXX M-1W
(0.161)
FXXXXN-1W
EXTERNAL CAPACITOR TABLE (Table 1)
Single Vout
Vin
Cin
Cout
(VC)
(VDC)
(uF)
(uF)
3.3/5
4.7
3.3/5
10
12
2.2
9
4.7
24
1
12
2.2
-
-
15/24
1
It’s not recommended to connect any external
capacitor in the application field with less than 0.5 watt
output.
Side view
Output Voltage Regulation and Over-voltage
Protection Circuit
The simplest device for output voltage regulation,
0.50
(0.020)
over-voltage and over-current protection is a linear
6.00(0.236)
1 2 3 4
1
Bottom view
voltage regulator with overheat protection that is
4
10.00(0.394)
7
5
connected to the input or output end in series
(Figure 2).
Vin
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch),
diameter:1.00mm(0.039inch)
+Vout
REG
DC
GND
DC
0V
REG
Vin
12 3
4
7
5
1
4
Function
1
GND
Vin
2
3
4
0V
+Vo
DC
0V
(Figure 2)
circuit of these products has no protection against
N ote:
U nit:mm(inch)
Pin secti on:0.50*0.30mm(0.020*0.012inch)
Pin secti on tolerances: 0.10mm( 0.004inch)
General tolerances: 0.25mm( 0.010i nch)
MORNSUN reserves the copyright
DC
Overload Protection
Under norm al operating conditions, the output
FOOTPRINT DETAILS
Pin
GND
+Vout
Pin
Function
1
4
5
7
GND
Vin
+Vo
overload. The simplest method is to connect a
self-recovery fuse in series at the input end or add
a circuit breaker to the circuit.
0V
Specifications subject to change without notice.
No parallel connection or plug and play.
F_M-1W & F_N-1W
A/1-2008
Page 2 of 2
Similar pages