Vishay F17724152030 Interference suppression film capacitors mkt radial potted type Datasheet

F1772-2 310 V-X2
Vishay BCcomponents
Interference Suppression Film Capacitors
MKT Radial Potted Type
FEATURES
l
w
• 15 mm to 37.5 mm lead pitch
• AEC-Q200 qualified for C  470 nF
• Supplied loose in box, taped on reel
• Compliant to RoHS Directive 2002/95/EC
h
PERMISSIBLE DC VOLTAGE
DC 800 VDC at 85 °C
lt
Pitch
P ± 0.4
DC 630 VDC at 110 °C
Ø dt
ENCAPSULATION
Dimensions in mm
Plastic case, epoxy resin sealed, flame retardant UL-class
94 V-0
APPLICATIONS
High stability grade for continuous across the line X2
applications.
See also “Application Note”:
www.vishay.com/doc?28153
CLIMATIC TESTING CLASS ACC. TO
IEC 60068-1
REFERENCE STANDARDS
CAPACITANCE RANGE (E12 SERIES)
IEC 60384-14 ed-3 and EN 60384-14
“IEC 60065 pass. flamm. class C”
UL 1283
UL 1414
CSA-E384-14
E12 series 0.01 µF to 2.2 µF
Preferred values acc. to E6
40/110/56/C
CAPACITANCE TOLERANCE
± 10 %, ± 20 % (± 5 % on request)
MARKING
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type; code for dielectric material; manufacturer location;
manufacturer’s logo; year and week; safety approvals
DIELECTRIC
Polyester film
ELECTRODES
Metallized
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
110 °C
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
[email protected]
CONSTRUCTION
Series construction
RATED VOLTAGE
AC 310 V; 50 Hz to 60 Hz
Document Number: 28161
Revision: 13-Jan-12
For technical questions, contact: [email protected]
www.vishay.com
343
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents Interference Suppression Film Capacitors
MKT Radial Potted Type
COMPOSITION OF CATALOG NUMBER
CAPACITANCE
(numerically)
MULTIPLIER
(nF)
F
0.1
2
1
3
10
4
100
5
Example:
468 = 680 nF
1772 X XX
XXXX
TYPE
PACKAGING (Taped on reel) (1)
PACKAGING (Loose)
Code
Code details
Tolerance
Code
Code details
Tolerance
2290
H: 16.5 mm
± 20 %
2004/2164
Lead length 4 - 1 mm
± 10 %
2291
H: 18.5 mm
± 20 %
2000/2160
Lead length 6 - 1 mm
± 10 %
2960
H: 16.5 mm
± 20 %
2015/2165
Lead length 15 - 1 mm
± 10 %
2261
H: 18.5 mm
± 20 %
2030/2163
Lead length 30 + 5 mm
± 10 %
2900
H: 16.5 mm
± 10 %
2204/2264
Lead length 4 - 1 mm
± 20 %
2901
H: 18.5 mm
± 10 %
2200/2260
Lead length 6 - 1 mm
± 20 %
2970
H: 16.5 mm
± 10 %
2215/2265
Lead length 15 - 1 mm
± 20 %
2971
H: 18.5 mm
± 10 %
2230/2263
Lead length 30 + 5 mm
± 20 %
Notes
• For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139
(1) Taped on reel pitch  27.5 mm is not available
SPECIFIC REFERENCE DATA
DESCRIPTION
Rated AC voltage (URAC)
VALUE
310 V
Permissible DC voltage (URDC)
630 V
 100 x 10-4 at 1 kHz
Tangent of loss angle
Rated voltage pulse slope at (dU/dt)R 435 VDC
R between leads, for C  0.33 µF at 100 V; 1 min
RC between leads, C > 0.33 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
100 V/µs
> 15 000 M
> 5000 s
> 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time  1000 V/s
C  0.47 µF
2200 V; for 1 min
C  0.47 µF
2150 V; for 1 min
Withstanding (AC) voltage between leads and case
Maximum application temperature
2120 V; 1 min
110 °C
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28139
www.vishay.com
344
For technical questions, contact: [email protected]
Document Number: 28161
Revision: 13-Jan-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Interference Suppression Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
C-tol. = ± 10 %
CAPACITANCE
(µF)
PITCH
(mm)
DIMENSIONS
wxhxl
MAX. (mm)
MASS (3)
(g)
SPQ
(pieces)
SHORT LEAD
ORDERING
CODE (1)(2)
15
15
15
15
15
15
15
15
15
15
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
6.0 x 12.0 x 17.5
6.0 x 12.0 x 17.5
1.4
1.4
1.4
1.4
1.4
1.4
1.4
2.0
2.0
2.0
750
750
750
750
750
750
750
500
500
500
F177231020..
F177231220..
F177231520..
F177231820..
F177232220..
F177232720..
F177233320..
F177233920..
F177234720..
F177235620..
15
15
15
15
15
22.5
22.5
15
22.5
22.5
15
22.5
27.5
22.5
27.5
27.5
22.5
27.5
27.5
22.5
27.5
37.5
27.5
37.5
37.5
27.5
37.5
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
8.5 x 15.0 x 17.5
7.0 x 16.5 x 26.0
7.0 x 16.5 x 26.0
10.0 x 16.5 x 17.5
8.5 x 18.0 x 26.0
10.0 x 19.5 x 26.0
13.5 x 22.5 x 18.0
10.0 x 19.5 x 26.0
11.0 x 21.0 x 31.0
12.0 x 22.0 x 26.0
11.0 x 21.0 x 31.0
11.0 x 21.0 x 31.0
15.5 x 26.5 x 26.5
13.0 x 23.0 x 31.0
13.0 x 23.0 x 31.0
15.5 x 26.5 x 26.5
15.0 x 25.0 x 31.5
14.5 x 24.5 x 41.5
18.0 x 28.0 x 31.0
15.5 x 28.5 x 41.5
15.5 x 28.5 x 41.5
21.0 x 31.0 x 31.0
18.0 x 32.5 x 41.5
2.4
2.7
2.7
2.7
2.7
4.1
4.1
3.0
4.6
6.7
5.5
6.7
9.1
13.0
9.1
9.1
13.5
12.9
12.9
13.5
15.0
18.9
19.0
24.0
24.0
28.0
31.6
450
300
325
300
300
235
235
235
200
170
185
170
125
110
125
125
110
110
110
110
100
80
85
70
70
70
60
F177236820..
F177238220..
F177241020..
F177241220..
F1772415216.
F177241520..
F177241820..
F1772422216.
F177242220..
F177242720..
F1772433216.
F177243320..
F177243920..
F17724472160
F177244720..
F177245620..
F1772468216.
F177246820..
F177248220..
F1772510216.
F177251020..
F177251220..
F1772515216.
F177251520..
F177251820..
F1772522216.
F177252220..
dt = 0.60 mm ± 0.06 mm
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
dt = 0.80 mm ± 0.08 mm
0.068
0.082
0.10
0.12
0.15
0.15
0.18
0.22
0.22
0.27
0.33
0.33
0.39
0.47
0.47
0.56
0.68
0.68
0.82
1.0
1.0
1.2
1.5
1.5
1.8
2.2
2.2
Notes
(1) These capacitors can be delivered on continuous tape and reel.
The ordering code is:
F1772-...-2900 at H = 16.5 mm
F1772-...-2901 at H = 18.5 mm
F1772-...-2970 at H = 16.5 mm
F1772-...-2971 at H = 18.5 mm
(2) Further information about packaging quantities with different lead length and/or taped versions, see document “Packaging Quantities”
www.vishay.com/doc?27608
(3)
Weight for short lead product only
• SPQ = Standard Packing Quantity
• For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Document Number: 28161
Revision: 13-Jan-12
For technical questions, contact: [email protected]
www.vishay.com
345
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents Interference Suppression Film Capacitors
MKT Radial Potted Type
C-tol. = ± 20 %
CAPACITANCE
(µF)
PITCH
(mm)
DIMENSIONS
wxhxl
MAX. (mm)
dt = 0.60 mm ± 0.06 mm
0.01
15
5.0 x 11.0 x 17.5
0.015
15
5.0 x 11.0 x 17.5
0.022
15
5.0 x 11.0 x 17.5
0.033
15
5.0 x 11.0 x 17.5
0.047
15
5.0 x 11.0 x 17.5
0.068
15
6.0 x 12.0 x 17.5
0.10
15
6.0 x 12.0 x 17.5
dt = 0.80 mm ± 0.08 mm
0.15
15
8.5 x 15.0 x 17.5
0.15
22.5
6.0 x 15.5 x 26.0
0.22
15
10.0 x 16.5 x 17.5
0.22
22.5
7.0 x 16.5 x 26.0
0.33
15
13.5 x 22.5 x 18.0
0.33
22.5
8.5 x 18.0 x 26.0
0.47
22.5
10.0 x 19.5 x 26.0
0.47
27.5
9.0 x 19.0 x 31.5
0.68
22.5
12.0 x 22.0 x 26.0
0.68
27.5
11.0 x 21.0 x 31.0
1.0
22.5
15.5 x 26.5 x 26.5
1.0
27.5
15.0 x 25.0 x 31.5
1.5
27.5
18.0 x 28.0 x 31.5
1.5
37.5
14.5 x 24.5 x 41.5
2.2
27.5
21.0 x 31.0 x 31.0
2.2
37.5
15.5 x 28.5 x 41.5
Notes
(1) These capacitors can be delivered on continuous tape and reel
The ordering code is:
F 1772-...-2290 at H = 16.5 mm
F 1772-...-2291 at H = 18.5 mm
F 1772-...-2960 at H = 16.5 mm
F 1772-...-2961 at H = 18.5 mm
(2) Further information about packing quantities with different lead length
www.vishay.com/docs?27608
• SPQ = Standard Packing Quantity
MASS
(g)
SPQ
(pieces)
SHORT LEAD
ORDERING
CODE (1)(2)
1.4
1.4
1.4
1.4
1.4
2.0
2.0
750
750
750
750
750
600
600
F177231022..
F177231522..
F177232222..
F177233322..
F177234722..
F177236822..
F177241022..
2.7
3.3
4.5
4.1
5.5
5.3
6.7
6.8
13.4
12.9
13.5
15.0
19.0
18.9
28.0
24.0
325
260
300
235
185
190
170
160
110
125
110
100
85
80
70
70
F1772415226..
F177241522...
F1772422226..
F177242222...
F1772433226.
F177243322..
F1772447226..
F177244722..
F1772468226..
F177246822..
F1772510226..
F177251022..
F1772515226.
F177251522..
F1772522226.
F177252222..
and/or taped versions, see document “Packing Quantities”
• For detailed tape specifications refer to Packaging Information: www.vishay.com/doc?28139
APPROVALS
SAFETY APPROVALS X2
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed 3)
310 VAC
0.01 - 2.2 µF X2
40005079
UL 1414
250 VAC
0.01 - 1.0 µF X2
E 100682
UL 1283
250 VAC
0.01 - 2.2 µF X2
E 76297
CSA-E 384-14
310 VAC
0.01 - 2.2 µF X2
2127723
CB TEST-CERTIFICATE
310 VAC
0.01 - 2.2 µF X2
DE 1-40110/A1
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
www.vishay.com
346
For technical questions, contact: [email protected]
Document Number: 28161
Revision: 13-Jan-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Interference Suppression Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information”.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board:
 For pitches 15 mm capacitors shall be mechanically fixed by the leads
 For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
 For products with pitch  15 mm, w = l = 0.3 mm; h = 0.1 mm
 For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm; h = 0.1 mm
 For products with pitch = 37.5 mm, w = l = 0.7 mm; h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = w + Δw
Eccentricity
Imax. = I + ΔI
CBA116
hmax. = h + Δh
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
 Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28161
Revision: 13-Jan-12
For technical questions, contact: [email protected]
www.vishay.com
347
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents Interference Suppression Film Capacitors
MKT Radial Potted Type
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
Impedance as a function of frequency (typical curve)
10 1
1 kHz
Z (Ω)
ΔC/C
(%)
6
4
-4
0.015 µF
0.01 µF
0.22 µF
0.47 µF
10-2
0.068 µF
0.033 µF
typical
2.2 µF
1.5 µF
1.0 µF
0.68 µF
-2
0.15 µF
10 -1
0.33 µF
max.
0
0.1 µF
2
0.047 µF
0.022 µF
100
min.
-6
- 60
- 20
10 -3
0.01
60 Tamb (°C) 100
20
Tangent of loss angle as a function of frequency (typical curve)
0.05 0.1
0.5 1.0
50 100
f (MHz)
5.0 10
Resonant frequency as a function of capacitance (typical curve)
102
f (MHz)
Dissipation factor
(x 10-4)
103
3
2
1
101
102
100
C ≤ 0.33 µF (curve 1)
0.33 µF < C ≤ 1.2 µF (curve 2)
1.2 µF < C ≤ 2.2 µF (curve 3)
101
102
103
104
f (Hz)
X2
10-1
101
105
Max. RMS voltage as a function of frequency
102
103
C (nF)
104
Max. RMS current as a function of frequency
3
104
AC voltage
(V)
AC current (mA)
10
2200 nF
1000 nF
103
470 nF
102
100 nF
47 nF
2
10
101
10 nF
100
Tamb ≤ 110 °C
101
1
2
10
10
www.vishay.com
348
10
3
4
10
f (Hz) 10
5
10-1 1
10
For technical questions, contact: [email protected]
Tamb ≤ 110 °C
2
10
3
10
104
f (Hz)
105
Document Number: 28161
Revision: 13-Jan-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Interference Suppression Film Capacitors
MKT Radial Potted Type
Vishay BCcomponents
Insulation resistance as a function of ambient temperature
(typical curve)
RC (s)
105
104
103
102
- 60
- 20
20
60 Tamb (°C) 100
APPLICATION NOTES AND LIMITING CONDITIONS
 For X2 electromagnetic interference suppression where a higher stabililty grade is needed for continuous across the line
applications (50 Hz/60 Hz) with a maximum mains voltage of 310 VAC.
 These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
 For series impedance applications we refer to application note: www.vishay.com/doc?28153
 The maximum ambient temperature must not exceed 110 °C.
 Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 ed 3
and Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapter “General Data” of this
specification
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.3
Robustness of terminations
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
4.4
Resistance to soldering heat
No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Document Number: 28161
Revision: 13-Jan-12
No visible damage
For technical questions, contact: [email protected]
www.vishay.com
349
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents Interference Suppression Film Capacitors
MKT Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.19
Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
C/C|  5 % of the value measured initially
Tangent of loss angle
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.20
Solvent resistance of the marking
Isopropylalcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
4.6
Rapid change of temperature
A = - 40 °C
B = + 110 °C
5 cycles
Duration t = 30 min
4.6.1
Inspection
Visual examination
4.7
Vibration
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
4.7.2
Final inspection
Visual examination
No visible damage
4.9
Shock
4.9.2
Final measurements
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
Visual examination
No visible damage
Capacitance
C/C|  5 % of the value measured initally
Tangent of loss angle
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured initially
As specified in section “Specific Reference”
of this specification
Insulation resistance
www.vishay.com
350
For technical questions, contact: [email protected]
No visible damage
Legible marking
No visible damage
Document Number: 28161
Revision: 13-Jan-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Interference Suppression Film Capacitors
MKT Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.11
Climatic sequence
Capacitance
4.11.1
Initial measurements
4.11.2
Dry heat
4.11.3
Damp heat cyclic
Test Db, first cycle
Cold
4.11.4
4.11.5
4.11.6
Damp heat cyclic
Test Db, remaining cycles
Final measurements
Vishay BCcomponents
PERFORMANCE REQUIREMENTS
Measured in 4.4.2 and 4.9.2
Tangent of loss angle
Measured initally in C1A and C1B
Temperature: 110 °C
Duration: 16 h
Temperature: - 40 °C
Duration: 2 h
Visual examination
Capacitance
Tangent of loss angle
Voltage proof
1350 VDC 1 min between terminations
Insulation resistance
No visible damage
Legible marking
C/C|  5 % of the value measured in 4.11.1
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured in 4.11.1
No permanent breakdown or flash-over
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.12
Damp heat steady state
4.12.1
Initial measurements
4.12.3
Final measurements
56 days, 40 °C, 90 % to 95 % RH
No load
Capacitance
Tangent of loss angle: 1 kHz
Visual examination
Capacitance
Tangent of loss angle
Voltage proof
1350 VDC; 1 min between terminations
Insulation resistance
No visible damage
Legible marking
|C/C|  5 % of the value measured in 4.12.1
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured in 4.12.1
No permanent breakdown or flash-over
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.13.1
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.13
Impulse voltage
3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C 1 µF
X2: 2.5 kV/C for C > 1 µF
Max. 24 pulses
Document Number: 28161
Revision: 13-Jan-12
No self healing breakdowns or flash-over
For technical questions, contact: [email protected]
www.vishay.com
351
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Vishay BCcomponents Interference Suppression Film Capacitors
MKT Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C3
4.14
Endurance
Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased
to 1000 V (RMS) for 0.1 s via resistor of
47  ± 5 %
4.14.7
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|C/C|  5 % compared to values measured
in 4.13.1
Tangent of loss angle
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured in 4.13.1
Voltage proof
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations and
case
No permanent breakdown or flash-over
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.15
Charge and discharge
10 000 cycles
Charged to 435 VDC
Discharge resistance:
435 V DC
R = ----------------------------------------1.5 x C  dU  dt 
4.15.1
Initial measurements
Capacitance
Tangent of loss angle:
For C  1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.13.3
Final measurements
Capacitance
|C/C|  10 % compared to values measured
in 4.15.1
Tangent of loss angle
Increase of tan 
 0.008 for: C  1 µF or
 0.005 for: C > 1 µF
Compared to values measured in 4.15.1
Insulation resistance
 50 % of values specified in section
“Insulation Resistance” of this specification
Resonance frequency
 0.9 times the value as specified in section
“Resonant Frequency” of this specification.
SUB-GROUP C5
4.16
Radio frequency characteristic
www.vishay.com
352
For technical questions, contact: [email protected]
Document Number: 28161
Revision: 13-Jan-12
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
F1772-2 310 V-X2
Interference Suppression Film Capacitors
MKT Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
Vishay BCcomponents
CONDITIONS
PERFORMANCE REQUIREMENTS
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V 250: 5 s
250 < V  500: 10 s
500 < V  1750: 20 s
V > 1750: 30 s
One flame application
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 30 s. No burning particle must drop from
the sample
SUB-GROUP C6
4.17
Passive flammability
Class C
12 mm
~ 8 mm
45.0°
SUB-GROUP C7
4.18
Active flammability
Document Number: 28161
Revision: 13-Jan-12
20 cycles of 2.5 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors shall
not burn with a flame
No electrical measurements are required
For technical questions, contact: [email protected]
www.vishay.com
353
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages