ITF F1G73 Saw bandpass filter Datasheet

SAW Bandpass Filter F1G73
Features
RF bandpass filter for GSM
Usable Bandwidth 45MHz
No matching single-ended operation
Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
RoHS Compliant
Package Dimension
1
I
1G73
2
3
6
6
1
5
5
2
4
4
3
Pin Configurations
Dimensions shown are nominal in millimeters
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
℃
-30
25
85
Storage Temperature Range
℃
-40
-
95
Power Handling Capability
dBm
-
-
13
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
1/7
SAW Bandpass Filter F1G73
Specifications
Fo = 1732.5 MHz
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
1732.5
-
MHz
Insertion Loss (In Fc ± 22.5 MHz)
-
2.5
3.5
dB
Amplitude Ripple (In Fc ± 22.5 MHz)
-
1.0
2.0
dB
VSWR (In Fc ± 22.5 MHz)
-
1.6
2.5
Relative Attenuation
dB
1500.0MHz ~ 1670.0MHz
25
37
-
1795.0MHz ~ 2000.0MHz
25
40
-
Input/Output Impedance
50
Ohm
Notes :
1)
All specifications are based on the matching schematic shown below
2)
All specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature
3)
All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
2/7
SAW Bandpass Filter F1G73
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
I2)
1G733)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
3/7
SAW Bandpass Filter F1G73
Typical Performance ( at +25℃
℃)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
4/7
SAW Bandpass Filter F1G73
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
5/7
SAW Bandpass Filter F1G73
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
6/7
SAW Bandpass Filter F1G73
Carrier Tape Dimensions [unit : mm]
A
3.40 ± 0.1
B
3.40 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G73
Rev. Date
2009-08-17
Rev.
NC9009-AS01
7/7
Similar pages