ITF F4521 Saw bandpass filter Datasheet

SAW Bandpass Filter F4521
Features
z
RF bandpass filter for CDMA450 C-Band Tx. Part
z
Usable bandwidth 5MHz (450 MHz ~ 455 MHz)
z
High attenuation
z
No matching 50Ω single-ended operation
z
Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm )
z
RoHS compliant
1.00±0.15
1.90±0.15
0.44
3.80±0.15
0.64±0.05
Package Dimensions
3
ITF
4521
5A1
6
1
0.44
5
5
2
4
4
3
1.27±0.05
2
6
1.40±0.15
3.80±0.15
1
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
5
Output
1, 3, 4, 6
Case ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-30
25
85
Storage Temperature Range
°C
-40
-
85
Power Handling Capability
dBm
-
-
30
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
1/7
SAW Bandpass Filter F4521
Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
452.5
-
MHz
Insertion Loss (In Fc +/- 2.5 MHz)
-
2.0
2.8
dB
Amplitude Ripple (In Fc +/- 2.5 MHz)
-
0.8
1.2
dB
VSWR (In Fc +/- 2.5 MHz)
-
1.5
2.0
0.3 MHz ~ 347.5 MHz
30
35
-
347.5 MHz ~ 441.5 MHz
25
30
-
460.0 MHz ~ 465.0 MHz
35
43
-
465.0 MHz ~ 1700 MHz
27
32
-
1700 MHz ~ 2000 MHz
20
25
-
Temperature Range (Operational)
-30
25
85
℃
30
dBm
Relative Attenuation
Input RF Power (In Fc +/- 2.5 MHz)
Input/Output Impedance
dB
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
2/7
SAW Bandpass Filter F4521
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
ITF2)
45213)
5A14)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
4) Lot Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
3/7
SAW Bandpass Filter F4521
Typical Performance ( at 25℃ )
CH1
S 21
log MAG
10 dB/
21 Oct 2003 14:58:47
5_:-1.706 dB
REF 0 dB
452.500 000 MHz
PRm
1_:-1.2321 dB
450 MHz
Cor
5
1
2_:-1.4889 dB
455 MHz
3_:-48.254 dB
460 MHz
2
4_:-62.187 dB
465 MHz
3
4
CH1 CENTER 455.000 000 MHz
CH2
S 21
SPAN 100.000 000 MHz
log MAG
1 dB/
REF 0 dB
21 Oct 2003 16:22:37
2_:-.2652 dB
5.000 000 MHz
REF=1
mean:-1.583 7 dB
s.dev: .1967 dB
2
p-p: .6602 dB
1
PRm
Cor
CH2 CENTER 455.000 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
SPAN 30.000 000 MHz
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
4/7
SAW Bandpass Filter F4521
Input / Output VSWR Charts
CH2
S 11
SWR
1 /
REF 1
21 Oct 2003 16:30:26
5_: 1.1264
CH2
S 22
SWR
1 /
3
21 Oct 2003 16:30:49
5_: 1.1435
452.500 000 MHz
4
3
1_: 1.2725
450 MHz
1_: 1.2348
450 MHz
2_: 1.1675
455 MHz
2_: 1.0989
455 MHz
3_: 13.505
460 MHz
3_: 22.485
460 MHz
4_: 14.709
465 MHz
4_: 20.257
465 MHz
PRm
PRm
Cor
Cor
5
5
CH2 CENTER 455.000 000 MHz
REF 1
452.500 000 MHz
4
1
SPAN 30.000 000 MHz
2
CH2 CENTER 455.000 000 MHz
1
SPAN 30.000 000 MHz
2
Input / Output Smith Charts
CH1
S 11
1 U FS
21 Oct 2003 15:24:04
-1.8379
191.37 pF
5_: 44.568
CH1
S 22
1 U FS
21 Oct 2003 15:24:28
-1.1895
295.72 pF
5_: 45.287
452.470 000 MHz
452.500 000 MHz
PRm
PRm
1_: 40.654
-6.3945
450 MHz
Cor
1_: 39.742
-4.207
450 MHz
Cor
2_: 59.842
-679.69 m
455 MHz
2_: 54.947
0.7539
455 MHz
3_: 14.527
-85.734
460 MHz
3_: 10.555
-84.746
460 MHz
4_: 6.0801
-44.193
465 MHz
5
2
2
1
1
3
3
4
CH1 CENTER 455.000 000 MHz
4_: 5.0156
-43.193
465 MHz
5
4
SPAN 100.000 000 MHz
CH1 CENTER 455.000 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
SPAN 100.000 000 MHz
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
5/7
SAW Bandpass Filter F4521
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
6/7
SAW Bandpass Filter F4521
Carrier Tape Dimensions [unit : mm]
A
4.30 ± 0.1
B
4.30 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F4521
Rev. Date
2006-06-08
Rev.
NR3016-AS02
7/7
Similar pages