Mitsumi F96-017-230-AGGAA Detach connector Datasheet

MITSUMI
Detach Connectors
CAM-F96, F97
Connectors
OUTLINE
1.17 pins connectors used for attaching and
removing between the operation panel and the
unit.
2.Misalignment absorption when fitted is
±0.3mm in direction X, ±1.0mm in direction Y
and ±0.5mm in direction Z.
3.Supports reflow mounting.
4. The cover and connector pins are linked as a
measure against socket contact deformation.
The structure is such that when the cover is
lowered the contact pin contact portion also
lowers a certain amount. (The contact pin
exposure outside the cover has been kept to
the required minimum to protect the contact
pins.)
CAM-F96
CAM-F97
HOW TO ORDER
1. CAM-F96 (Plug)
2. CAM-F97 (Socket)
F96-017-230-AGGAA
F97-017-230-AGGAA
1
2
1 Series No. (F96)
2 No. of contacts (017 : 17pins)
1
2
1 Series No. (F97)
2 No. of contacts (017 : 17pins)
MITSUMI
Detach Connectors
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
DC 14V
1A
500V AC 1minute
100MΩ min. (at 500V DC)
70mΩ max.
Rated Voltage
Rated Current
Withstanding Voltage
Insulation Resistance
Contact Resistance
MECHANICAL CHARACTERISTICS
10,000times
7.55N (0.77kgf) max.
5.78±0.49N (0.590±0.05kgf)
-30~+85°C
Life (Matching Cycle)
Total Insertion Force
Total Rebound Force
Using Temperature Range
MATERIAL & FINISH
Component parts
Housing
CAM-F96
Contact
Ground pin
Housing
Contact
CAM-F97
Ground pin
Cover
Material
Nylon resin
Copper Alloy
Copper Alloy
Nylon resin
Copper Alloy
Copper Alloy
Nylon resin
Brass
Finish
Black
Gold plating
Gold plating
Black
Gold plating
Nickel plating
Black
Nickel plating
MITSUMI
DIMENSIONS
CAM-F96 (Plug)
23
23
2-3.5
1.5
+0.1
0
0.5
+0.1
0
1.1
0.4
P=1.25
17−3.3 +0.1
0
1.5
1.7
7
(4)
2.5
2-ø1.2
1
17-1.25
20
23.7 (Hole pitch)
20
The reference PWB size (TOLERANCE:±0.05)
1
4.1
24.9
2-ø1 ±0.05
4
23.7±0.1
Unit : mm
MITSUMI
Detach Connectors
CAM-F97 (Socket)
35
31
20
(17.5)
23 (Hole pitch)
20
17-2.9 +0.1
0
8-2.5
3
5
1.5
P=2.5
1.25
0.4
31 (Hole pitch)
(ø0.8)
12.2
(4.1)
13
±0.1
2-ø2.4
4-ø1.2 +0.1
0
Y
17.5
The reference PWB size. (TOLERANCE: ±0.05)
2.05
35
27.5
25.6
4.3
(0.7)
1.7
23±0.1
26.4
31±0.1
0.5
2-ø1 ±0.05
1
2-ø1±0.05
17.5
1.5
X
P=2.5
17-1.4
7-2.5
Z
3±0.1
5±0.1
Unit : mm
Similar pages