OPLINK FCLM635P20RD3 Fiber coupled laser module Datasheet

Fiber Coupled Laser Module (635 nm)
FCLM635 Series
The FCLMTM Laser Module is a temperature stabilized semiconductor laser coupled with single mode fiber. It features very low M2 value Gaussian beam output
with excellent beam pointing stability at a wide temperature dynamic range. The
unique designed electrical driver enable this optical engine has the lowest power
consumptions compare to the similar product in the industry. The FCLMTM Laser
Module is a Class III b laser product
Performance Specificationns
Condition
Min
Typ
Max
Unit
Optical Performance
Wavelength
Output Power
T= 25°C
635
nm
T= 25°C
20
10~20 MHz
0.1
0.3
%
Power Stability
1hrs, T= 25°C
0.25
0.5
%
Power Stability
24hrs, T= 25°C
0.75
1
Noise(RMS)
Polarization Extinction Ratio
mW
15
%
dB
Collimated Beam Parameters
M2
Beam Diameter
1.2
1/e2
0.7, 0.9, 1.5, 2.0, 4.0, 6.0
mm
Beam Divergence
full angle
1
mrad
Pointing Stability
2hrs, T= 25°C
5
urad
1
urad/°C
Pointing Stability
Fiber Information
Length
Fiber Type
Mode Field Diameter
NA
Fiber Jacket Diameter
1, 2, 3
m
3
um
Power Supply
9
V
Power Consumption
3
Electrical Parameters
10
W
Current(TEC)
2
A
Current(LD)
200
mA
Power Setting
 ESD Protection
 Power Adjustable
 LD Temperature Stabilized
 Compact Size
0.12
mm
Control
 Plug & Play
 LD Current Full Protection
SM / PM
3
Temperature Stability
Features
0.2
°C
Applications
 Polarization Maintaining Fiber
 High Speed Modulation
 Remote Control
 Collimated & Focused Beam
 Metal Jacket Protection
ACC
0% ~ 100% output power
Environmental Conditions
Storage Temperature
Operation Temperature
0 to + 50
°C
+ 10 to + 40
°C
Operation Humidity
No Condensing
Package Dimensions *
112 x 56 x 26.5
mm
Note:
* The mechanical tolerance should be +/-0.2
mm on all package dimensions unless otherwise
custom specified.
R04.20090331
Fiber Coupled Laser Module
FCLM635 Series
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
Mechanical Drawing / Package Dimensions (dimension in mm)
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
FCLM
6
3
5
Wavelength
Control Type
Connector Type
Local = L
Remote = R
635 nm= 635
Power Output
20mW = 20
Fiber Type
Operation Type
DC = D
Modulation = M
Single Mode = S
Polarization Maintain = P
None = 1
FC/PC = 2
FC/APC = 3
Fiber Length
Beam Size
0.7mm = 1
0.9mm = 2
1.5mm = 3
2.0mm = 4
4.0mm = 5
6.0mm = 6
None = 0
1 Meter 3mm Cable = 1
3 Meter 3mm Cable = 2
1 Meter Metal Jacket = 3
3 Meter Metal Jacket = 4
2 Meter 3mm Cable = 5
2 Meter Metal Jacket = 6
This component does not comply with the Federal Regulations (21 CFR Subchapter1 ) as administered by the Center for Devices and Radiological health. Purchaser acknowledges that his/
her products must comply with these regulations before they can be sold to a customer. The output light from this product is harmful to a human body even if it is invisible. Avoid looking at
the output of this product directly, or through a lens during operation. Observance of operation should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.101040.11 as a radiation safety standard for laser products.
Oplink follows a policy of continuous product improvement. Specifications are subject to change without prior notice.
The module’s warranty is 1 year.
R04.20090331
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages