Fairchild FDC602 P-channel 2.5v specified powertrench mosfet Datasheet

FDC602P
P-Channel 2.5V Specified PowerTrench MOSFET
General Description
Features
This P-Channel 2.5V specified MOSFET uses a rugged
gate version of Fairchild’s advanced PowerTrench
process. It has been optimized for power management
applications with a wide range of gate drive voltage
(2.5V – 12V).
•= –5.5 A, –12 V
RDS(ON) = 0.033 Ω @ VGS = –4.5 V
RDS(ON) = 0.052 Ω @ VGS = –2.5 V
•= Fast switching speed.
•= High performance trench technology for extremely
low RDS(ON) .
Applications
•= Battery management
•= Load switch
•= Battery protection
D
D
S
SuperSOT TM-6
D
D
6
2
5
3
4
G
Absolute Maximum Ratings
Symbol
1
TA=25oC unless otherwise noted
Parameter
Ratings
Units
VDSS
Drain-Source Voltage
–12
V
VGSS
Gate-Source Voltage
±12
V
ID
Drain Current
-5.5
A
– Continuous
(Note 1a)
– Pulsed
PD
-30
Maximum Power Dissipation
TJ, TSTG
(Note 1a)
1.6
(Note 1b)
0.8
W
-55 to +150
°C
(Note 1a)
78
°C/W
(Note 1)
30
°C/W
Operating and Storage Junction Temperature Range
Thermal Characteristics
RθJA
Thermal Resistance, Junction-to-Ambient
RθJC
Thermal Resistance, Junction-to-Case
Package Marking and Ordering Information
Device Marking
Device
Reel Size
Tape width
Quantity
.602
FDC602P
7’’
8mm
3000 units
1999 Fairchild Semiconductor Corporation
FDC602P Rev A
FDC602P
November 1999
ADVANCE INFORMATION
Symbol
TA = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Typ
Max Units
Off Characteristics
BVDSS
Drain–Source Breakdown Voltage
VGS = 0 V, ID = –250 µA
IDSS
Zero Gate Voltage Drain Current
VDS = –10 V,
IGSSF
Gate–Body Leakage, Forward
VGS = 12 V,
IGSSR
Gate–Body Leakage, Reverse
VGS = –12 V
On Characteristics
–12
V
–1
µA
VDS = 0 V
100
nA
VDS = 0 V
–100
nA
VGS = 0 V
(Note 2)
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = –250 µA
RDS(on)
Static Drain–Source
On–Resistance
VGS = –4.5 V,
VGS = –2.5 V,
–0.6
ID = –5.5 A
ID = –4.4 A
–1.5
V
0.033
0.052
Ω
–1.3
A
–1.2
V
Drain–Source Diode Characteristics and Maximum Ratings
IS
Maximum Continuous Drain–Source Diode Forward Current
VSD
Drain–Source Diode Forward
Voltage
VGS = 0 V,
IS = –1.3 A
(Note 2)
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient resistance where the case thermal reference is defined as the solder mounting surface of the drain
pins. RθJC is guaranteed by design while RθCA is determined by the user's board design.
a.
78°C/W when mounted on a 1in2 pad of 2oz copper on FR-4 board.
b.
156°C/W when mounted on a minimum pad.
2. Pulse Test: Pulse Width ≤=300 µs, Duty Cycle ≤=2.0%
FDC602P Rev A
FDC602P
Electrical Characteristics
SuperSOTTM-6 Tape and Reel Data and Package Dimensions
SSOT-6 Packaging
Configuration: Figur e 1.0
Packaging Description:
Customize Label
SSOT-6 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
Anti static Cover Tape
These full reels are individually barcode labeled and
placed inside a pizza box (illustrated in figure 1.0) made of
recyclable corrugated brown paper with a Fairchild logo
printing. One pizza box contains three reels maximum.
And these pizza boxes are placed inside a barcode
labeled shipping box which comes in different sizes
depending on the number of parts shipped.
F63TNR
Label
Embossed
Carrier Tape
631
631
631
631
631
SSOT-6 Packaging Information
Packaging Option
Standard
(no f l ow c ode )
Pin 1
D87Z
SSOT-6 Unit Orientation
Packaging type
TNR
TNR
Qty per Reel/Tube/Bag
3,000
10,000
Reel Size
7" Dia
13"
184x187x47
343x343x64
Max qty per Box
9,000
30,000
Weight per unit (gm)
0.0158
0.0158
Weight per Reel (kg)
0.1440
0.4700
Box Dimension (mm)
343mm x 342mm x 64mm
Intermediate box fo r D87Z Option
F63TNR Label
Note/Comments
F63TNR
Label
F63TNR Label sa mpl e
184mm x 187mm x 47mm
Pizza Box fo r Standar d Opti on
F63TNR
Label
LOT: CBVK741B019
QTY: 3000
FSID: FDC633N
SPEC:
D/C1: D9842
D/C2:
SSOT-6 Tape Leader and Trailer
Configuration: Figur e 2.0
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
Carrier Tape
Cover Tape
1998 Fairchild Semiconductor Corporation
Comp onent s
Traile r Tape
300mm mi nimum or
75 empty poc kets
Lead er Tape
500mm mi nimum or
125 emp ty poc kets
August 1999, Rev. C
SuperSOTTM-6 Tape and Reel Data and Package Dimensions, continued
SSOT-6 Embossed Carrier Tape
Configuration: Figure 3.0
P0
D0
T
E1
F
K0
Wc
W
E2
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
Pkg type
A0
B0
SSOT-6
(8mm)
3.23
+/-0.10
3.18
+/-0.10
W
8.0
+/-0.3
D0
D1
E1
E2
1.55
+/-0.05
1.125
+/-0.125
1.75
+/-0.10
F
6.25
min
3.50
+/-0.05
P1
P0
4.0
+/-0.1
4.0
+/-0.1
K0
T
1.37
+/-0.10
0.255
+/-0.150
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
Wc
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
5.2
+/-0.3
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SSOT-6 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
8mm
7" Dia
7.00
177.8
8mm
13" Dia
13.00
330
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
July 1999, Rev. C
SuperSOTTM-6 Tape and Reel Data and Package Dimensions, continued
SuperSOT -6 (FS PKG Code 31, 33)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0158
1998 Fairchild Semiconductor Corporation
September 1998, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench 
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
www.fairchildsemi.com
Similar pages