Merrimac FDF-4A-1500 Frequency doubler Datasheet

FREQUENCY DOUBLERS
FD Series
5 to 3000 M Hz/M inimum SpuriousOutput/Flatpack orTO-5 orSM A Connectors
PRINCIPAL SPECIFICATIONS
†
Input
Freq.,
MHz
Operating
Input Frequency,
MHz
75 - 1500
75 - 300
300 - 700
700 - 1500
11
11
11
14
14
14
– 50
– 40
– 35
– 50
– 45
– 40
5 - 500
5 - 100
100 - 300
300 - 500
12
12
15
16
15
17
– 40
– 30
– 30
– 45
– 40
– 40
25 - 3000
25 - 600
600 - 2500
2500 - 3000
12
12
13
14
13
15.5
–27
–18
–15
–30
–30
–20
FDM-500A
5 - 500
5 - 100
100 - 300
300 - 500
12
12
15
16
15
17
– 40
– 35
– 30
– 45
– 40
– 40
FDT-500A
5 - 500
5 - 100
100 - 300
300 - 500
10
10
11
13
13
15
– 40
– 35
– 30
– 45
– 40
– 40
Model
Number
FDF-4C-750
FDF-500A
FDF-4A-1500
†
Conversion
Loss, dB,
Typ. Max.
*Typical Harmonic Output RF Input
F3
F4
Range Package
F1
dB
dB
dB
(Nom.)
Style
+7 to 16
(13 dBm)
Flat
+5 to 18
(13 dBm)
Flat
+7 to 16
(13 dBm)
Flat
– 25
– 27
– 30
+5 to 18
(13 dBm)
SMA
– 25
– 27
– 30
+2 to 13
(9 dBm)
TO-5
– 25
– 27
– 30
Conversion Loss measured at nominal Input Power
*Typical Harmonic Level is referenced to RF Input Power
All specifications measured at nominal input power and referenced to input power.
Typical FDM-500A Performance
GENERAL SPECIFICATIONS
Impedance:
50 Ω nom.
Weight, FDM-500A
0.65 oz. (2.5 g)
Weight, All others:
0.09 oz. (18 g)
Operating Temperature:
– 55° to +85°C
General Notes:
1. Merrimac Frequency Doublers cover
the frequency range of 5 to 3000 MHz
using lumped element circuits for broad
bandwidth and excellent rejection of
fundamental and third harmonic energy.
These units may also act as quadruplers
with additional conversion loss.
2. Merrimac Frequency Doublers comply
with the relevant sections of MIL-M-28837
and may be supplied screened for
compliance with additional specifications
for military and space specifications
requiring the highest reliability.
23Feb96
ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldwell,NJ,07006 / 973-575-1300 /FAX 973-575-0531
FD Series
FREQUENCY DOUBLERS
5 to 3000 MHz / Minimum Spurious Output / Flatpack or TO-5 or SMA Connectors
Package Outline FDF-4C-750
Package Outline
FDF-500A
Package Outline FDF-4A-1500
Package Outline
FDT Series
Package Outline
FDM Series
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
23Feb96
For additional information contact MERRIMAC, 41 Fairfield Pl., West Caldwell, NJ, 07006 973-575-1300 / FAX 973-575-0531
Similar pages