Fairchild FDLL400 High voltage general purpose diode Datasheet

FDH 400 / FDLL 400
High Voltage General Purpose Diode
Cathode Band
LL-34 COLOR BAND MARKING
DEVICE
1ST BAND
FDLL400
BLACK
SOD80
LL-34
DO-35
THE PLACEMENT OF THE EXPANSION GAP
HAS NO RELATIONSHIP TO THE LOCATION
OF THE CATHODE TERMINAL
Cathode is denoted with a black band
-1st band denotes cathode terminal
and has wider width
Absolute Maximum Ratings(1)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
WIV
Parameter
Value
Units
Working Inverse Voltage
150
V
IO
Average Rectified Forward Current
200
mA
IF
DC Forward Current
500
mA
if
Recurrent Peak Forward Current
IFSM
Non-repetitive Peak Forward Surge Current
TSTG
Storage Temperature Range
600
mA
Pulse Width = 1.0 s
1.0
A
Pulse Width = 1.0 μs
4.0
A
-65 to +200
°C
Operating Junction Temperature
175
TJ
Note:
1. These ratings are limiting values above which the serviceability of the diode may be impaired.
These ratings are bansed on a maximum junction temperature of 200°C.
These are steady state limits. The factory should be consulted on applications involving pulsed or low duty
cycle operations.
°C
Thermal Characteristics
Values are at TA = 25°C unless otherwise noted.
Symbol
PD
RθJA
Max.
Parameter
FDH / FDLL 400
Units
Power Dissipation
500
mW
Derate above 25°C
3.33
mW/°C
Thermal Resistance, Junction to Ambient
300
°C/W
© 1997 Fairchild Semiconductor Corporation
FDH 400 / FDLL 400 Rev. 1.1.0
www.fairchildsemi.com
1
FDH 400 / FDLL 400 — High Voltage General Purpose Diode
April 2013
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Test Conditions
VR
Breakdown Voltage
FDH / FDLL 400 IR= 100 μA
VF
Forward Voltage
FDH / FDLL 400
IR
Reverse Leakage
FDH / FDLL 400
CO
Diode Capacitance
FDH / FDLL 400 VR = 0, f = 1.0 MHz
trr
Reverse Recovery Time FDH / FDLL 400
© 1997 Fairchild Semiconductor Corporation
FDH 400 / FDLL 400 Rev. 1.1.0
Min.
Max.
200
Units
V
IF= 200 mA
1.0
V
IF= 300 mA
1.1
V
VR= 150 V
100
nA
VR= 150 V, TA= 150°C
100
μA
2.0
pF
50
ns
IF = IR = 30 mA, Irr = 3.0 mA,
RL = 100 Ω
www.fairchildsemi.com
2
FDH 400 / FDLL 400 — High Voltage General Purpose Diode
Electrical Characteristics
FDH 400 / FDLL 400 — High Voltage General Purpose Diode
Physical Dimensions
SOD-80
0.50
0.30
C
R
0.30
0.20
1.50
1.30
2.64 REF
3.60
3.30
NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO-213, VARIATION AC.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C
CORNER RADIUS IS OPTIONAL.
D) DRAWING FILE NAME: SOD80A REV01
Figure 1. 2-TERMINAL, SOD-80, JEDEC DO-213AC, MINI-MELF
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area:
http://www.fairchildsemi.com/packaging/tr/SOD80A_tnr.pdf.
© 1997 Fairchild Semiconductor Corporation
FDH 400 / FDLL 400 Rev. 1.1.0
www.fairchildsemi.com
3
FDH 400 / FDLL 400 — High Voltage General Purpose Diode
Physical Dimensions (Continued)
DO-35
25.40 MIN
(2X)
4.56
3.05
0.533
0.460
1.91
1.53
NOTES: UNLESS OTHERWISE SPECIFIED
A) PACKAGE STANDARD REFERENCE:
JEDEC DO-204, VARIATION AH.
B) HERMETICALLY SEALED GLASS PACKAGE.
C) PACKAGE WEIGHT IS 0.137 GRAM.
D) ALL DIMENSIONS ARE IN MILLIMETERS.
E) DRAWING FILE NAME: DO35AREV02
Figure 2. AXIAL LEADED, GLASS, JEDEC DO204, VARIATION AH (ACTIVE)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 1997 Fairchild Semiconductor Corporation
FDH 400 / FDLL 400 Rev. 1.1.0
www.fairchildsemi.com
4
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
FPS¥
F-PFS¥
FRFET®
SM
Global Power Resource
GreenBridge¥
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
mWSaver¥
OptoHiT¥
OPTOLOGIC®
OPTOPLANAR®
2Cool¥
AccuPower¥
AX-CAP®*
BitSiC¥
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
Sync-Lock™
®
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
Solutions for Your Success¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
®*
TinyBoost¥
TinyBuck¥
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC¥
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component in any component of a life support, device, or
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain
system whose failure to perform can be reasonably expected to
life, and (c) whose failure to perform when properly used in
cause the failure of the life support device or system, or to affect its
accordance with instructions for use provided in the labeling, can be
safety or effectiveness.
reasonably expected to result in a significant injury of the user.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I64
© Fairchild Semiconductor Corporation
www.fairchildsemi.com
Similar pages