Faraday FE220 Cable equaliser Datasheet

CABLE EQUALISERS
Long runs of cable often require equalisation for loss in signal amplitude with frequency. This range
of cable equalisers is designed to correct this loss to within 0.1 dB when using the length of cable
specified. The module will produce a total insertion loss of 3 dB (when linked to the cable) so that
standard video amplitude may be used to boost signal. It is in a diecast metal box with BNC
connectors or it can be supplied as a 20 pin DIL package. Other cables can be equalised, please
discuss your requirements.
Order Code
FE213 1
FE214 2
FE215 2
FE216 2
FE217 2
FE218 2
FE219 2
FE220 2
Cable 1,0 / 6,6
200 m
100 m
80 m
60 m
50 m
40 m
30 m
20 m
0,6 / 3,7
134 m
67 m
56.6 m
40.2 m
33.5 m
26.8 m
20.1 m
13.4 m
0,6 / 2,8
120 m
60 m
48 m
36 m
30 m
24 m
18 m
12 m
Typical performance of cable plus equaliser:
6.0 dB + 0.1 dB 1
Insertion Loss at 100 kHz
3.0 dB + 0.1 dB 2
Amplitude Ripple to 5.5 MHz
+ 0.1 dB
Impedance
75 ohms
Metal box with BNC connectors
2 x 1.5 x 1.25 inches
Package
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
Fara260d.doc
Page 1 of 2
Jan-01(A)
PACKAGE DETAIL
Faraday Technology Ltd.
Croft Road Industrial Estate,
Newcastle, Staffordshire
ST5 0QZ. England.
Fara260d.doc
Tel:
Fax:
Email:
Web site:
Page 2 of 2
+ 44 (0)1782 661501
+ 44 (0)1782 630101
[email protected]
http://www.faradaytech.co.uk
Jan-01(A)
Similar pages