GE FEPB16GT Fast efficient plastic rectifier Datasheet

NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
FEPB16AT THRU FEPB16JT
FAST EFFICIENT PLASTIC RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 16.0 Amperes
TO-263AB
FEATURES
0.160 (4.06)
0.190 (4.83)
0.380 (9.65)
0.420 (10.67)
0.045 (1.14)
0.245 (6.22)
MIN
0.055 (1.40)
K
0.047 (1.19)
0.055 (1.40)
0.320 (8.13)
0.575 (14.60)
0.360 (9.14)
1
SEATING
PLATE
K
0.625 (15.88)
2
0.090 (2.29)
0.110 (2.79)
-T-
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
♦ Low forward voltage, high current capability
♦ High surge current capability
♦ Superfast recovery times for high efficiency
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
0.018 (0.46)
0.095 (2.41)
0.025 (0.64)
0.100 (2.54)
MECHANICAL DATA
0.080 (2.03)
0.027 (0.686)
0.110 (2.79)
0.037 (0.940)
PIN 1
K - HEATSINK
PIN 2
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
Weight: 0.08 ounce, 2.24 grams
Dimensions are in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
FEPB
SYMBOLS 16AT
FEPB
16BT
FEPB
16CT
FEPB
16DT
FEPB FEPB
16FT 16GT
FEPB
16HT
FEPB
16JT
UNITS
Maximum repetitive peak reverse voltage
VRRM
50
100
150
200
300
400
500
600
Volts
Maximum RMS voltage
VRMS
35
70
105
140
210
280
350
420
Volts
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
500
600
Volts
Maximum average forward rectified current
at TC=100°C
I(AV)
16.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=100°C per leg
IFSM
200.0
Amps
Maximum instantaneous forward voltage per leg
at 8.0A
VF
Maximum DC reverse current
at rated DC blocking voltage per leg
IR
TC=25°C
TC=100°C
Maximum reverse recovery time (NOTE 1)
per leg
trr
Typical Junction Capacitance per leg (NOTE 2)
CJ
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case per leg mounted on heatsink
4/98
0.95
1.3
1.5
10.0
500.0
35.0
µA
50.0
85.0
ns
60.0
RΘJC
2.2
TJ, TSTG
-55 to +150
Volts
pF
°C/W
°C
RATINGS AND CHARACTERISTICS CURVES FEPB16AT THRU FEPB16JT
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
20
16
12
8.0
4.0
0
300
RESISTIVE OR INDUCTIVE LOAD
0
50
100
150
CASE TEMPERATURE, °C
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
TC=100°C
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
250
200
150
100
50
0
1
10
100
NUMBER OF CYCLES AT 60 HZ
FIG. 4 -TYPICAL REVERSE CHARACTERISTICS
PER LEG
100
40
50V-400V
600V-1000V
10
TJ=125°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
TJ=25°C
50-400V
300-400V
500-600V
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER LEG
10
5°C
12
TJ=
00°C
TJ=1
1
0.1
TJ=25°C
0.01
0
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
JUNCTION CAPACITANCE, pF
1,000
TJ=125°C
f=1.0 MHZ
Vsig=50mVp-p
100
50-400V
500-600V
10
0.1
1
10
REVERSE VOLTAGE, VOLTS
100
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100
Similar pages