Vishay FESF16JT-E3/45 Ultrafast plastic rectifier Datasheet

FES(F,B)16AT thru FES(F,B)16JT
Vishay General Semiconductor
Ultrafast Plastic Rectifier
TO-220AC
FEATURES
• Glass passivated chip junction
ITO-220AC
• Ultrafast recovery time
• Low switching losses, high efficiency
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF
maximum peak of 245 °C (for TO-263AB package)
2
2
1
1
FES16xT Series
FESF16xT Series
PIN 1
• Solder dip 260 °C, 40 s (for TO-220AC and
ITO-220AC package)
PIN 1
CASE
PIN 2
PIN 2
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TO-263AB
K
TYPICAL APPLICATIONS
2
For use in high frequency rectifier of switching mode
power supplies, inverters, freewheeling diodes,
dc-to-dc converters, and other power switching
application.
1
FESB16xT Series
PIN 1
PIN 2
K
HEATSINK
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV)
16 A
VRRM
50 V to 600 V
IFSM
250 A
trr
35 ns, 50 ns
VF
0.975 V, 1.30 V, 1.50 V
TJ max.
150 °C
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
SYMBOL
FES
16AT
FES
16BT
FES
16CT
FES
16DT
FES
16FT
FES
16GT
FES
16HT
FES
16JT
UNIT
Maximum repetitive
peak reverse voltage
VRRM
50
100
150
200
300
400
500
600
V
Maximum RMS voltage
PARAMETER
VRMS
35
70
105
140
210
280
350
420
V
Maximum DC blocking voltage
VDC
50
100
150
200
300
400
500
600
V
Maximum average forward
rectified current at TC = 100 °C
IF(AV)
16
A
Peak forward surge current
8.3 ms single half sine-wave
superimposed on rated load
IFSM
250
A
TJ, TSTG
- 65 to + 150
°C
VAC
1500
V
Operating storage and
temperature range
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
Document Number: 88599
Revision: 07-Jan-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
FES(F,B)16AT thru FES(F,B)16JT
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS SYMBOL
Maximum
instantaneous
forward voltage (1)
16 A
VF
Maximum DC
reverse current at
rated DC blocking
voltage
TC = 25 °C
TC = 100 °C
IR
Maximum reverse
recovery time
IF = 0.5 A,
IR = 1.0 A,
Irr = 0.25 A
trr
Typical junction
capacitance
4.0 V, 1 MHz
CJ
FES
16AT
FES
16BT
FES
16CT
FES
16DT
FES
16FT
0.975
FES
16GT
FES
16HT
1.30
FES
16JT
1.50
UNIT
V
10
500
µA
35
50
ns
175
145
pF
Note:
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
FES
FESF
FESB
UNIT
RθJC
1.2
1.7
1.2
°C/W
Typical thermal resistance, junction to case
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.78
45
50/tube
Tube
45
50/tube
Tube
45
50/tube
Tube
81
800/reel
Tape and reel
45
50/tube
Tube
45
50/tube
Tube
TO-220AC
FES16JT-E3/45
ITO-220AC
FESF16JT-E3/45
1.80
TO-263AB
FESB16JT-E3/45
1.33
TO-263AB
FESB16JT-E3/81
1.33
TO-220AC
FES16JTHE3/45 (1)
1.78
ITO-220AC
FESF16JTHE3/45 (1)
1.80
TO-263AB
FESB16JTHE3/45
(1)
1.33
45
50/tube
Tube
TO-263AB
FESB16JTHE3/81 (1)
1.33
81
800/reel
Tape and reel
Note:
(1) Automotive grade AEC Q101 qualified
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88599
Revision: 07-Jan-08
FES(F,B)16AT thru FES(F,B)16JT
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1000
Resistive or Inductive Load
Instantaneous Reverse Leakage
Current (µA)
Average Forward Rectified Current (A)
20
16
12
8
4
0
100
10
TJ = 25 °C
TJ = 100 °C
1
0.1
0
50
100
150
0
20
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Figure 1. Maximum Forward Current Derating Curve
Figure 4. Typical Reverse Leakage Characteristics
1000
300
TJ = TJ max.
8.3 ms Single Half Sine-Wave
JEDEC Method
250
Junction Capacitance (pF)
Peak Forward Surge Current (A)
50 - 200 V
300 - 400 V
TJ = 25 °C
200
150
100
50
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
50 - 400 V
500 - 600 V
10
0
100
10
1
0.1
1
100
10
Number of Cycles at 60 Hz
Reverse Voltage (V)
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Figure 5. Typical Junction Capacitance
Instantaneous Forward Current (A)
100
TJ = 125 °C
10
50 - 200 V
300 - 400 V
500 - 600 V
1
TJ = 25 °C
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Instantaneous Forward Voltage (V)
Figure 3. Typical Instantaneous Forward Characteristics
Document Number: 88599
Revision: 07-Jan-08
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
FES(F,B)16AT thru FES(F,B)16JT
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AC
TO-220AC
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91) DIA.
0.148 (3.74) DIA.
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
1
PIN
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
7° REF.
0.191 (4.85)
0.171 (4.35)
CASE
0.037 (0.94)
0.027 (0.68)
7° REF.
2
1
0.560 (14.22)
0.530 (13.46)
PIN 1
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.350 (8.89)
0.330 (8.38)
0.110 (2.79)
0.100 (2.54)
PIN 2
0.105 (2.67)
0.095 (2.41)
0.671 (17.04)
0.651 (16.54)
PIN
1.148 (29.16)
1.118 (28.40)
2
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
0.350 (8.89)
0.330 (8.38)
7° REF.
0.076 (1.93) REF.
45° REF.
0.635 (16.13)
0.625 (15.87)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88599
Revision: 07-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages