2.54mm Pitch Miniature Connector for Flexible Board FH1 Series ■Features 1. 2.54mm FPC and FFC Connector The contact pitch is 2.54mm. 2. Contact Reliability This connector assures high contact reliability for high voltage contact. 3. Eighteen Types of Contact Numbers This connector consists of 18 kinds of 8, 9, 10, 11, 12, 13, 14, 15, 15, 17, 18, 19, 20, 21, 22, 27, and 29 contacts. ■Applications HDD, facsimiles, printers, VTR, etc. ■Product Specifications Rating Operating Temperature Range:_40~+85ç (Note 1) Storage Temperature Range:_10~+60ç (Note 2) Rated Current: 1A Rated Voltage: 200V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range: Relative humidity, 90% max. (Not dewed) Applicable FPC t=0.13~0.3 Tin plating Item Specification Condition 1. Insulation Resistance 5000Mø min. Measured at 500V DC 2. Withstand voltage Neither short or breakdown should occur. 500V AC for 1 minute 3. Contact Resistance (Not dewed) 20mømax. Measured at DC 1A π FPC conductor resistance included 4. Mechanical operation Contact resistance : 40mø max. 30 cycles No part should be broken, cracked or loosened 5. Vibration No part should be broken, cracked or loosened Frequency: 10~55Hz and full amplitude 1.50mm in 3 directions for 2 hours, respectively 6. Shock No part should be broken, cracked or loosened Acceleration: 490m/S2, duration: 11ms, sine half-wave: in 3 directions for 3 times, respectively 7. Moisture Resistance in Steady State Insulation resistance: 500Mø min. Exposed to temperature 40ç and humidity 90~95% for 96 hours 5 cycles under conditions as follows; 8. Temperature Cycle No part should be broken, cracked or loosened Temperature: _55ç→+5~+35→85→+5~+35ç Time: 30→10~15→ 30~10~15 minutes 9.Resistance to Soldering heat Neither appearance should be deformed nor contact remarkably loosened. Automatic soldering: 260çœ for 10 seconds Note 1. Temperature rise included when energized Note 2. This storage indicates a long-term storage state for the unused product before board mounted. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been installed in the board. Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification". D2 ■Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Contact Phosphor bronze Tin plating ––––––– ■Ordering Information Please determine the specific product. If needed, please select and order the product from the product No. as listed on catalog page D4 and D5. FH 1 - 17 S -2.54 DS q w e r t y q Series Name : FH r Contact alignment : Single w Series No. :1 t Contacts Pitch : 2.54mm y Contact Type : DS : Right angle type e Number of Contacts : 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 27, 29 DSA : Straight type ■FPC · FFC Dimensions Unit: mm Number of Contacts 5 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 27 29 Size A 10.16 17.78 20.32 22.86 25.40 27.94 30.48 33.02 35.56 38.10 40.64 43.18 45.72 48.26 50.80 53.34 66.04 71.12 B 15.29 22.91 25.45 27.99 30.53 33.07 35.61 38.15 40.69 43.23 45.77 48.31 50.85 53.39 55.93 58.47 69.90 76.25 D3 ■Right Angle Type Unit:mm D4 Product No. HRS No. Number of Contacts A B C FH1-08S-2.54DS CL586-0015-5 8 26.0 23.01 17.78 FH1-09S-2.54DS CL586-0016-8 9 28.5 25.55 20.32 FH1-10S-2.54DS CL586-0017-0 10 31.0 28.09 22.86 FH1-11S-2.54DS CL586-0018-3 11 33.6 30.63 25.40 FH1-12S-2.54DS CL586-0019-6 12 36.1 33.17 27.94 FH1-13S-2.54DS CL586-0020-5 13 38.7 35.71 30.48 FH1-14S-2.54DS CL586-0027-4 14 41.3 38.25 33.02 FH1-15S-2.54DS CL586-0028-7 15 43.8 40.79 35.56 FH1-16S-2.54DS CL586-0029-0 16 46.3 43.33 38.10 FH1-17S-2.54DS CL586-0001-0 17 48.8 45.87 40.64 FH1-18S-2.54DS CL586-0002-3 18 51.4 48.41 43.18 FH1-19S-2.54DS CL586-0003-6 19 53.9 50.95 45.72 FH1-20S-2.54DS CL586-0004-9 20 56.4 53.49 48.26 FH1-21S-2.54DS CL586-0005-1 21 59.0 56.03 50.80 FH1-22S-2.54DS CL586-0006-4 22 61.5 58.57 53.34 FH1-27S-2.54DS CL586-0007-7 27 73.0 70.00 66.04 ■Straight Type Unit: mm Product No. HRS No. Number of Contacts A B C D E F FH1-05S-2.54DSA CL586-0036-5 5 18.3 15.39 10.16 5.5 4 4.5 FH1-08S-2.54DSA CL586-0021-8 8 26.0 23.01 17.78 5.5 4 4.5 FH1-10S-2.54DSA CL586-0023-3 10 31.0 28.09 22.86 5.5 4 4.5 FH1-11S-2.54DSA CL586-0024-6 11 33.6 30.63 25.40 5.5 4 4.5 FH1-12S-2.54DSA CL586-0025-9 12 36.1 33.17 27.94 5.5 4 4.5 FH1-13S-2.54DSA CL586-0026-1 13 38.7 35.71 30.48 5.5 4 4.5 FH1-14S-2.54DSA CL586-0030-9 14 41.3 38.25 33.02 5.5 4 4.5 FH1-15S-2.54DSA CL586-0031-1 15 43.8 40.79 35.56 5.5 4 4.5 FH1-16S-2.54DSA CL586-0032-4 16 46.3 43.33 38.10 5.5 4 4.5 FH1-17S-2.54DSA CL586-0008-0 17 48.8 45.87 40.64 5.5 4 4.5 FH1-18S-2.54DSA CL586-0009-2 18 51.4 48.41 43.18 5.5 4 4.5 FH1-19S-2.54DSA CL586-0010-1 19 53.9 50.95 45.72 5.5 4 4.5 FH1-20S-2.54DSA CL586-0011-4 20 56.4 53.49 48.26 5.5 4 4.5 FH1-21S-2.54DSA CL586-0012-7 21 59.0 56.03 50.80 5.5 4 4.5 FH1-22S-2.54DSA CL586-0013-0 22 61.5 58.57 53.34 5.5 4 4.5 FH1-27S-2.54DSA CL586-0014-2 27 73.0 70.00 66.04 5.5 4 4.5 FH1-29S-2.54DSA CL586-0037-8 29 79.3 76.35 71.12 6.0 4.5 5.0 D5