Hirose FH26-27S-0.3SHW 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connector Datasheet

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors
FH26 Series
1.0mm
●Space saving(51 pos. shown)
3.2mm
16.8mm
Metal fittings do no protrude
outside of the connector body
■Features
1. Extremely light weight
●Can be mounted over conductive traces.
The typical version, with all 51 contacts loaded, weights
only 0.1 grams.
2. Easy solderability on the PC board
The soldering leads are on 0.6 mm pitch, exiting on front
and back of the connector.
3. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
4. Easy FPC insertion and reliable electrical
connection
Proven Flip LockR actuator allows easy insertion of FPC.
Tactile sensation when fully closed confirms complete
electrical and mechanical connection.
No exposed contacts on the bottom
of the connector
●Operation
(1)
(1) Actuator
Actuator open
open
(2)
(2) Insert
Insert FPC
FPC
5. Accepts standard thickness FPC
Actuator
q
0.2mm thick standard Flexible Printed Circuit board can
be used.
This is the only ultra-low profile ZIF connector allowing
the use of standard FPC.
6. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel
allows use of vacuum nozzles.
Standard reel contains 5,000 connectors.
■Applications
Mobile phones, PDA's, digital cameras, digital video
cameras, LCD connections, plasma displays (PDP), camera
modules and other compact devices requiring Flexible
Printed Circuit connections using high reliability ultra-small
profile connectors.
w
FPC
(3)
(3) Close
Close the
the actuator
actuator
(4)
(4) FPC
FPC connected
connected
e
r
2004.8
1
■Specifications
Rating
Recommended FPC :
Current rating
Voltage rating
0.2A DC
30V AC
Operating temperature range -55 ç to +85ç (Note 1)
Operating humidity range
Relative humidity 90%
max. (No condensation)
Storage temperature range -10ç to +50ç (Note 2)
Storage humidity range
Relative humidity 90% max.
Thickness: = 0.2±0.03mm tin-lead plated (Note 3)
Item
Specification
Conditions
1. Insulation resistance
50 M ohms min.
100 V DC
2. Withstanding voltage
No flashover or insulation breakdown.
90 V AC /one minute
3. Contact resistance
100 m ohms max.
* Including FPC conductor resistance
1 mA
4. Durability
(Insertion/ withdrawal)
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
10 cycles
5. Vibration
No electrical discontinuity of 1µs or more.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3
directions.
6. Shock
No electrical discontinuity of 1µs. min.
Contact resistance: 100 m ohms max.
No damage, cracks, or parts dislocation.
Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
7. Humidity
(Steady state)
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No affect on appearance or performance.
96 hours at temperature of 40±2ç and humidity of 90% to 95%.
8. Temperature cycle
Contact resistance: 100 m ohms max.
Insulation resistance: 50 M ohms min.
No damage, cracks, or parts looseness.
Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
9. Resistance to soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350ç +/-10ç for 5±1 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts must be also gold plated: Specify the (05) plating code.
■Materials
Part
Material
Insulator
LCP
Actuator
PA
Contacts
Finish
Remarks
Color: Black
UL94V-0
Color: Dark brown
Phosphor bronze
Metal fitting
Tin-lead plated (Note 3)
---------------
Tin plated (Lead free)
---------------
■Ordering information
FH26 - 51S - 0.3 SHW (05)
1
3
4
5
1 Series name: FH26
4 Terminal type: SHW(SMT horizontal mounting)
2 No. of contacts: 13, 21, 23, 25, 27, 33, 35, 39,
5 Plating specifications
41, 45, 51, 57, 71
3 Contact pitch: 0.3mm
2
2
Blank: Tin-lead plated
(05) : Gold flash plated
■Connector Dimensions
A
0.3
B
0.6
(0.3)
3.2
(1.25)
(0.12)
0.6
Number of contacts indicator
(0.12)
1
C
0.5
0.3
3.2
(D: FPC insertion slot dimension)
1
0.1
1
0.1
E
Notes 1 The coplanarity of each terminal lead within specified dimension is ± 0.1 mm.
2 Packaged on tape and reel only. Check packaging specification.
All dimensions: mm
CL No.
Number of Contacts
A
B
C
D
E
FH26-13S-0.3SHW
Part Number
CL580-0209-3
13
5.4
3.0
3.6
4.23
4.9
FH26-21S-0.3SHW
CL580-0207-8
21
7.8
5.4
6.0
6.63
7.3
FH26-23S-0.3SHW
CL580-0203-7
23
8.4
6.0
6.6
7.23
7.9
FH26-25S-0.3SHW
CL580-0208-0
25
9.0
6.6
7.2
7.83
8.5
FH26-27S-0.3SHW
CL580-0204-0
27
9.6
7.2
7.8
8.43
9.1
FH26-33S-0.3SHW
CL580-0210-2
33
11.4
9.0
9.6
10.23
10.9
FH26-35S-0.3SHW
CL580-0205-2
35
12.0
9.6
10.2
10.83
11.5
FH26-39S-0.3SHW
CL580-0201-1
39
13.2
10.8
11.4
12.03
12.7
FH26-41S-0.3SHW
CL580-0206-5
41
13.8
11.4
12.0
12.63
13.3
FH26-45S-0.3SHW
CL580-0211-5
45
15.0
12.6
13.2
13.83
14.5
FH26-51S-0.3SHW
CL580-0200-9
51
16.8
14.4
15.0
15.63
16.3
FH26-57S-0.3SHW
CL580-0212-8
57
18.6
16.2
16.8
17.43
18.1
FH26-71S-0.3SHW
CL580-0202-4
71
22.8
20.4
21.0
21.63
22.3
Embossed tape reel packaging (5,000 pieces/reel).
Order by number of reels.
3
(0.55:Metal mask)
(0.65:Metal mask)
0.6±0.05
0.3±0.05
(0.23:Metal mask)
(0.3:Metal mask)
0.4±0.05
C±0.05
0.95±0.05
(0.7:Metal mask)
Outline of
the connector
0.3±0.05
0.2±0.05
(0.2)
0.6±0.05
(0.23:Metal mask)
(0.45)
B±0.05
0.3±0.03
2.15±0.05
0.8±0.05
(3.6)
0.65±0.05
BRecommended PCB mounting pattern and metal mask dimensions
0.5±0.05
Detail H
BRecommended FPC Dimensions
(Lead plated 0.1 MAX)
F±0.05
0.3±0.07
1.1±0.1
0.5min.
(0.5)
B
A
1
0.3+0.04
-0.03
0.1±0.02
(0.07)
0.6±0.07
2.5±0.3
2.1±0.1
0.2±0.03
2.25±0.1
0.3+0.04
-0.03
0.3±0.02
H
0.3±0.1
0.6±0.02
M
AX
(2.5)
R0
.2
1±0.1
(0.15)
0±0.03
1.1±0.1
1±0.1
C±0.03
3.5 MIN.(Stiffener)
0.3±0.07
(0.2)
(0.2)
B±0.03
0.6±0.07
1 Overlap between covering film layer and stiffener.
All dimensions: mm
Part Number
4
CL No.
Number of Contacts
B
C
F
FH26-13S-0.3SHW
CL580-0209-3
13
3.0
3.6
4.2
FH26-21S-0.3SHW
CL580-0207-8
21
5.4
6.0
6.6
FH26-23S-0.3SHW
CL580-0203-7
23
6.0
6.6
7.2
FH26-25S-0.3SHW
CL580-0208-0
25
6.6
7.2
7.8
FH26-27S-0.3SHW
CL580-0204-0
27
7.2
7.8
8.4
FH26-33S-0.3SHW
CL580-0210-2
33
9.0
9.6
10.2
FH26-35S-0.3SHW
CL580-0205-2
35
9.6
10.2
10.8
FH26-39S-0.3SHW
CL580-0201-1
39
10.8
11.4
12.0
FH26-41S-0.3SHW
CL580-0206-5
41
11.4
12.0
12.6
FH26-45S-0.3SHW
CL580-0211-5
45
12.6
13.2
13.8
FH26-51S-0.3SHW
CL580-0200-9
51
14.4
15.0
15.6
FH26-57S-0.3SHW
CL580-0212-8
57
16.2
16.8
17.4
FH26-71S-0.3SHW
CL580-0202-4
71
20.4
21.0
21.6
BPackaging Specification
(K)
(3.05)
(4.55)
Unreeling direction
G±0.3
Ø1
(0.3)
J±0.1
8±0.1
.5
2±0.15
+
0
0 .1
4±0.1
(1.6)
1.75±0.1
●Embossed Carrier Tape Dimensions (Tape width of 24mm max.)
Flat surface, for placement with automatic equipment
(1.25)
All dimensions: mm
Part Number
CL No.
Number of Contacts
G
J
K
L
FH26-13S-0.3SHW
CL580-0209-3
13
16
7.5
5.6
16.5
FH26-21S-0.3SHW
CL580-0207-8
21
16
7.5
8.0
16.5
FH26-23S-0.3SHW
CL580-0203-7
23
16
7.5
8.6
16.5
FH26-25S-0.3SHW
CL580-0208-0
25
16
7.5
9.2
16.5
FH26-27S-0.3SHW
CL580-0204-0
27
16
7.5
9.8
16.5
FH26-33S-0.3SHW
CL580-0210-2
33
24
11.5
11.6
24.5
FH26-35S-0.3SHW
CL580-0205-2
35
24
11.5
12.2
24.5
FH26-39S-0.3SHW
CL580-0201-1
39
24
11.5
13.4
24.5
FH26-41S-0.3SHW
CL580-0206-5
41
24
11.5
14.0
24.5
FH26-45S-0.3SHW
CL580-0211-5
45
24
11.5
15.2
24.5
FH26-51S-0.3SHW
CL580-0200-9
51
24
11.5
17.0
24.5
5, 000 pieces per reel.
1.5 +0.1
0
Unreeling direction
1.7
(3.05)
(4.55)
+0.15
0
H±0.1
(K)
(0.3)
(1.25)
G±0.3
Ø1
.5
(1.6)
J±0.1
+
0
0 .1
1.75±0.1
●Embossed Carrier Tape Dimensions (Tape width of 32mm min.)
Flat surface, for placement with automatic equipment
All dimensions: mm
Part Number
CL No.
Number of Contacts
G
H
J
K
L
FH26-57S-0.3SHW
CL580-0212-8
57
32
28.4
14.2
18.8
32.5
FH26-71S-0.3SHW
CL580-0202-4
71
44
40.4
20.2
23.0
44.5
5
●Reel Dimensions
End section
(L)
Mounting section
(Ø80)
Unreeling direction
(Ø380)
Ø1
3±
0.5
(2)
Lead section (400mm min.)
Connectors
Blank section
(10 pockets min.)
6
Embossed carrier tape
Blank section
(10 pockets min.)
Top cover tape
BRecommended Temperature Profile
●Using Typical Solder Paste
5 sec. max.
250
Temperature
240℃
200
200℃
160℃
150
150℃
(℃)
100
50
(30sec.)20 sec. to
25℃
30 sec.
(60sec.) 60 sec. to 90 sec.
0
Start
Soldering
Preheating
120
60
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-2)
Environment:
:Room air
Solder composition: :Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.'s
Part Number: OZ63-201C-50-9)
Test board
:Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions
:0.3mm∞0.65mm,0.3mm∞0.8mm
Metal mask
:0.23∞0.55∞0.1mm thick,
0.23∞0.65∞0.1mm thick
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may
vary,depending on solder paste type, volume/thickness and
board size/thickness. Consult your solder paste and
equipment manufacturer for specific recommendations.
Time (Seconds)
●Using Lead-free Solder Paste
MAX 250℃
250
Temperature
230℃
200
200℃
150
150℃
(℃)
100
50
25℃
(60sec.) 90 sec. to 120 sec.
0
Start
60
Preheating
120
(60sec.)
Soldering
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-NR-2)
Environment
:Room air
Solder composition
:Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
Part Number: M705-221CM5-42-10.5)
Test board
:Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions
:0.3mm∞0.65mm, 0.3mm∞0.8mm
Metal mask
:0.23∞0.55∞0.1mm thick,
0.23∞0.65∞0.1mm thick
The temperature profiles are based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
Time (Seconds)
7
BRecommended FPC Construction
●Contact FPC manufacturer for specific details.
1. Using Single-sided FPC
Material Name
Connecting side
Covering film layer.
Material
Polyamide
1 mil thick.
Thickness (µm)
25
25
Cover adhesive
Surface treatment
Tin-lead plated
Copper foil
Cu
Base adhesive
Thermosetting adhesive
25
Base film
Polyamide
1 mil thick
25
Reinforcement material adhesive
Thermosetting adhesive
40
Stiffener
Polyamide
75
1/2oz
3 mil thick
Total
5
35
205
Back side
2. Using Double-sided FPC
Material
Material Name
Connecting side
Covering layer film
Polyamide
1 mil thick
25
25
Cover adhesive
5
Surface treatment
Tin-lead plated
Through-hole copper
Cu
Copper foil
Cu
Base adhesive
Thermosetting adhesive
18
Base film
Polyamide
1 mil thick
25
Base adhesive
Thermosetting adhesive
18
Copper foil
Cu
18
Cover adhesive
Thermosetting adhesive
25
Covering layer film
Polyamide
1 mil thick
25
Reinforcement material adhesive Thermosetting adhesive
25
Stiffener
Back side
Thickness (µm)
Polyamide
Total
15
1/2oz
1/2oz
1 mil thick
18
25
199
●To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.
8
BOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
9
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting FPC.
SActuator operation
1 Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
Actuator
Damage to the contacts
Damage
Axis of rotation
2 Axis of rotation
Assure free rotation of
the actuator
10
Precautions
3 The actuator will rotate 135 degrees
135˚
maximum. Do not apply force to rotate
further.
4 When operating the actuator, do so at the
center portion.
5 As illustrated, do not attempt removal or re-
positioning of the actuator.
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as
shown), then completely inserted.
Perpendicular with
the connector
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
11
Precautions
SFPC Insertionw
Do not insert the FPC at any angle from above.
As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.
*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space
at the time of board layout. Insertion will be difficult when the FPC is too short.
*Contact the FPC manufacturer for information about the bending specifications.
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend the
FPC too close to the actuator.
Load: 0.05N/pin max.
12
Precautions
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.
135˚
Other Precautions
SHand Soldering Precautions
When hand soldering:
1 Do not perform reflow or hand soldering with the FPC inserted in the connector.
2 Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
3 Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
13
NOTES :
14
NOTES :
15
NOTES :
USA:
HIROSE ELECTRIC U.S.A., INC.
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : 1 805 522 7958
Fax : 1 805 522 3217
http://www.hiroseusa.com
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Beechavenue 46.1119PV
Schiphol-Rijk
Phone : 31 20 6557460
Fax : 31 20 6557469
http://www.hiroseeurope.com
UNITED KINGDOM:
KOREA:
HIROSE ELECTRIC UK LTD.
HIROSE KOREA CO., LTD.
Crownhill Business Centre 22 Vincent Avenue (#2NA311,Shihwa Industrial Complex),
Crownhill, Milton Keynes MK8 OAB
1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do
Phone : 44 1908 305400
Phone : 82 31 496 7000,7124
Fax : 44 1908 305401
Fax : 82 31 496 7100
http://www.hirose.co.uk
http://www.hirose.co.kr
CHINA:
HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.
3705,Bund Center,222 Yan An Road(E),Shanghai 20002
Phone : 86 21 6335 2538
Fax : 86 21 6335 0767
HONG KONG:
HIROSE ELECTRIC CO., LTD.
Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha
Tsui East, Kowloon
Phone : 852 2803 5338
Fax : 852 2591 6560
SINGAPORE:
HIROSE ELECTRIC CO., LTD.
10 Anson Road #34-13 International Plaza 079903
Phone : 65 6324 6113
Fax : 65 6324 6123
®
16
GERMANY:
HIROSE ELECTRIC GmbH
Zeppelinstrasse 42 D-73760 Ostfildern Kemnat
Phone : 49 711 4560021
Fax : 49 711 4560729
http://www.hirose.de
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei
Phone : 886 2 2557 7351,7352
Fax : 886 2 2552 9851
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
Similar pages