Hirose FH33M-16S-0.4SH 0.4mm,0.5mm,1mm pitch, 1.2mm above the board, flexible printed circuit & flexible flat cable zif connector Datasheet

0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH33 Series
Increased FPC retention force
1.2mm
●Small size
2.5mm
[ 30 pos. ]
17mm
Metal fittings (Leadless)
■Features
●Can be mounted over conductive traces.
1. Low-profile, small PCB mounting area
Narrow width of only 2.5 mm reduced the board footprint
by approximately 17% to 57%, as compared to several
similar FH Series HRS connectors.
2. Various contact pitch (0.4mm, 0.5mm, 1mm
pitch) available
In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm
pitch also available.
3. Increased FPC/FFC retention force
_ In the horizontal direction: Approximately 2.0 times
(compared to 0.5mm pitch FH12 series.)
_ In the vertical direction: Approximately 1.7 times
(compared to 0.5mm pitch FH19 series.)
No exposed contacts on the bottom of the connector
●Simple operation
1 Open the actuator
2 Insert FPC
Actuator
4. Conductive traces on the PCB can run
under the connector
1
No exposed contacts on the bottom of the connector.
5. One finger operation of the actuator
Proven (in several other Hirose’s connectors) Flip-Lock®
rotating actuator assures reliable mechanical and
electrical connection with FPC/FFC, confirming it with a
definite tactile feel.
2
FPC
6. Easy FPC insertion and reliable electrical connection
Proven Flip Lock actuator allows easy insertion of FPC/FFC
and provides a tactile sensation when fully closed,
confirming complete electrical and mechanical connection.
7. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat Cable (FFC) can be used.
8. Board placement with automatic equipment
●Locked condition
3 Close the actuator
4 FPC connected
3
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
Standard reel packaging contains 5000 connectors.
9. Halogen-free*
(FH33J Series)
3
4
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
2007.4
2012.3
1
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Product Specifications
Current rating
0.5 A
(0.4mm pitch type 0.4A)
Voltage rating
50 V AC
(0.4mm pitch type 40V AC)
Ratings
Operating temperature range -55 ç to +85ç (Note 1)
Storage temperature range -10ç to +50ç (Note 2)
Operating humidity range
Relative humidity 90% max. Storage humidity range
Relative humidity 90% max.
(No condensation)
(No condensation)
Thickness = 0.3 ± 0.05mm gold plated (under 30 pos.), 0.3 ± 0.03mm gold plated (over 31 pos.)
Recommended FPC
Item
Specification
Conditions
1. Insulation resistance
500 Mø min.
100 V DC
2. Withstanding voltage
No flashover or insulation breakdown.
150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type)
3. Contact resistance
50 mø max.
100 mø max(0.4mm pitch type).
* Including FPC conductor resistance
1 mA
4. Durability
(insertion/ withdrawal)
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
20 cycles
No electrical discontinuity of 1µs or more.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
5. Vibration
6. Shock
7. Humidity
(Steady state)
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation.
8. Temperature cycle
9. Resistance to
soldering heat
No deformation of components affecting performance.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in
each of the 3 directions.
Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
96 hours at 40ç and humidity of 90% to 95%.
Temperature : -55ç/+15ç to +35ç/+85ç/+15ç to +35ç
Time
: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
5 cycles
Reflow
: At the recommended temperature profile
Manual soldering: 350ç ± 10ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
■Materials
Part
Material
Finish
Color:Beige
Color:Deep brown
Color:Beige
Color:Black
Color:Beige
Color:Deep brown
Color:Beige
Color:Black
Gold flash plated
Pure tin reflow plated
PA
FH33 series
LCP
PPS
LCP
PA
LCP
PPS
FH33J series
Insulator
FH33M series
FH33MHJ series
Contacts
Metalfittings
Phosphor bronze
Remarks
UL94V-0
---------
■Ordering information
FH 33 M H J - 12 (6) S B - 1 SH (10)
1
2
3
4
5
6
7
8
9
10
11
12
1 Series name:FH
4 Blank:Width 3.0mm(standard)
7 Standard type:Blank
10 Contact pitch:
H:Width 3.5mm(long actuator type)
Eccentric type:Nomber of contacts
0.4mm,0.5mm,1mm
2 Series No:33
3 Blank:0.5mm pitch,1mm pitch 5 Blank:Standard
8 Contact alignment:S: single
11 SH:SMT horizontal mounting
M:0.4mm pitch
J:Halogen-free
9 Eccentric direction:
12 Plating specifications:
Flame retardance UL94V-0
6 Standard type:Nomber of contacts
Eccentric type:Number of contacts in
1mm housing
2
Blank:standard type
B:Eccentric type
Blank:Gold plated
(10) Gold plated with
nickel barrier
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
●0.4mm pitch, 0.5mm pitch type
A±0.15
B
G
(1)
T
∞Number of contacts
(0.15)
0.15 G
2.25±0.15
Lot No. indicator
U
A**
Polarizing mark indicator
Number of contacts indicator
(0.15)
F
(C: FPC insertion slot dimension)
D±0.1
0.35±0.1
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
6 After reflow, the terminal plating may change color, however
this does not represent a quality issue.
(1.8)
Notes 1
2
3
4
5
1
2
0
0.5±0.1
a
(1.1)
0.15MAX 0.55±0.1
1.73±0.2
2.2±0.15
1.2±0.1
(1
20
˚)
F
0.25±0.1
0
0.15MAX
1
2
0.3+0.15
3
– 0.1
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
C
D
T
U
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
10
12
16
18
19
40
65
5
6.5
7
8
9
11.5
12
15
16
17
18
20
22
24.5
8.3
4
7
8
10
11
11.5
22
27.9
2.5
4
4.5
5.5
6.5
9
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
6
1.5
4.5
5.5
7.5
8.5
9
19.5
25.6
3.57
5.07
5.57
6.57
7.57
10.07
10.57
13.57
14.57
15.57
16.57
18.57
20.57
23.07
6.87
2.57
5.57
6.57
8.57
9.57
10.07
20.57
26.47
4.35
5.85
6.35
7.35
8.35
10.85
11.35
14.35
15.35
16.35
17.35
19.35
21.35
23.85
7.65
3.35
6.35
7.35
9.35
10.35
10.85
21.35
27.25
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.95
Note 1: (**) : Plating specification. Refer to ordering information.
Note 2: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
3
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Connector Dimensions
●1mm pitch type
A±0.15
(1.75)
B
1
G
∞Number of contacts
(0.15)
0.15 G
(1)
Lot No. indicator
HRS mark
(0.45)
A**
△
Polarizing mark indicator
2.25±0.15
(V)
Cav No.
Number of contacts indicator
(0.15)
(C: FPC insertion slot dimension)
D±0.1
F
0.35±0.1
(1.8)
Notes 1
2
3
4
5
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
6 After reflow, the terminal plating may change color, however
this does not represent a quality issue.
1
2
0
0.5±0.1
a
(1.1)
0.15MAX 0.55±0.1
1.73±0.2
2.2±0.15
1.2±0.1
F
0.25±0.1
0
0.15MAX
1
2
0.3+0.15
3
_0.1
Unit: mm
Part Number
CL No.
Number of Contacts
4
FH33-4S-1SH(**)
580-1322-1-**
580-1323-4-**
6
FH33-12(6)SB-1SH(**)
580-1326-2-**
6
FH33J-12(6)SB-1SH(**)
Note 1: (**) : Plating specification. Refer to ordering information.
Note 2: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
4
A
B
C
D
V
6.5
8
8
3
5
5
5.07
6.57
6.57
5.85
7.35
7.35
1.75
1.25
1.25
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
0.65±0.05
●0.4mm pitch, 0.5mm pitch type
B
H
(0.2)
0.25±0.05(Metal mask)
(2.15)
(0.15)
(0.15)
0.8±0.05
(0.2)
(2.45)
0.1 H
2.8±0.05
T
∞Number of contacts 0.3±0.05(Land)
J±0.1
(0.2)
K±0.1
(A)
*Recommended metal mask thickness = 0.1mm
■Recommended FPC dimensions
●0.4mm pitch, 0.5mm pitch type
L±0.05
R0
<under 30 pos.>0.3±0.05
<over 31 pos.>0.3±0.03
E
3.3MIN(Stiffener)
2-
0.35±0.03(FPC)
0.3±0.03(FFC)
0.27±0.03(0.4mm pitch)
2.3±0.3(Exposed area)
T±0.03
.2
B±0.03
T±0.07
Note 1: If the stiffener is less than 3.3 mm, E dimension must be 0.5 mm min.
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
J
K
L
T
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
10
12
16
18
19
40
65
5
6.5
7
8
9
11.5
12
15
16
17
18
20
22
24.5
8.3
4
7
8
10
11
11.5
22
27.9
2.5
4
4.5
5.5
6.5
9
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
6
1.5
4.5
5.5
7.5
8.5
9
19.5
25.6
3.8
5.3
5.8
6.8
7.8
10.3
10.8
13.8
14.8
15.8
16.8
18.8
20.8
23.3
7.1
2.8
5.8
6.8
8.8
9.8
10.3
20.8
26.7
4.9
6.4
6.9
7.9
8.9
11.4
11.9
14.9
15.9
16.9
17.9
19.9
21.9
24.4
8.2
3.9
6.9
7.9
9.9
10.9
11.4
21.9
27.8
3.5
5
5.5
6.5
7.5
10
10.5
13.5
14.5
15.5
16.5
18.5
20.5
23
6.8
2.5
5.5
6.5
8.5
9.5
10
20.5
26.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
5
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended PCB mounting pattern and metal mask dimensions
●1mm pitch type
(0.2)
2.8±0.05
(0.15)
0.1 H
(2.45)
1
H
0.3±0.05(Land)
0.25±0.05(Metal mask)
0.8±0.05
(0.2)
W±0.1
1.15±0.1
(0.2)
(0.15)
∞Number of contacts
(2.15)
0.65±0.05
B
J±0.1
K±0.1
(A)
*Recommended metal mask thickness = 0.1mm
■Recommended FPC dimensions
●1mm pitch type
L±0.1
X±0.1
B±0.1
1±0.1
<under 30 pos.>0.3±0.05
<over 31 pos.>0.3±0.03
0.65±0.1
1±0.1
.2
R0
E
3.3MIN(Stiffener)
2.3±0.3(Exposed area)
2-
Unit: mm
Part Number
FH33-4S-1SH(**)
FH33-12(6)SB-1SH(**)
FH33J-12(6)SB-1SH(**)
6
CL No.
Number of Contacts
A
B
J
K
L
W
X
580-1322-1-**
580-1323-4-**
580-1326-2-**
4
6
6
6.5
8
8
3
5
5
5.3
6.8
6.8
6.4
7.9
7.9
5
6.5
6.5
1.15
0.65
0.65
1
0.5
0.5
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■FH33 Series FPC/FFC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material
Material Name
Covering film layer
Cover adhesive
Surface treatment
Copper foil
Base adhesive
Base film
Reinforcement material adhesive
Stiffener
Thickness (µm)
(25)
(25)
Polyimide 1 mil thick
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
3
Cu
1oz
Heat-hardened adhesive
Polyimide 1 mil thick
Heat-hardened adhesive
Polyimide 7 mil thick
Total
35
25
25
30
175
293
2. Using Double-sided FPC
Material
Material Name
Covering film layer
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
Base adhesive
Base film
Base adhesive
Copper foil
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
Thickness (µm)
Polyimide 1 mil thick
(25)
(25)
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
3
Cu
Cu
1/2oz
Heat-hardened adhesive
Polyimide 1 mil thick
Heat-hardened adhesive
Cu
1/2oz
15
18
18
25
18
18
25
25
50
100
297
Polyimide 1 mil thick
Heat-hardened adhesive
Polyimide 4 mil thick
Total
3. Using FFC
Material Name
Material
Thickness (µm)
Polyester film
(12)
polyester thermoplastic type
Adhesive
Gold plated, soft copper film
Adhesive
(30)
35
Polyester
Polyester
30
12
Adhesive
Polyester
30
Stiffener
Polyester
188
Total
295
π Practical tolerance of thickness dimension is ±20 µm
4. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 ± 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
7
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Packaging Specifications
●Embossed Carrier Tape Dimensions
●Embossed Carrier Tape Dimensions
(1)
Flat surface for
placement with
automatic equipment
1.5+0.1
0
(3)
(3.8)
Unreeling direction
Flat surface for
placement with
automatic equipment
(1)
Unreeling direction
(Ø1
3)
●Reel Dimensions
(Ø80)
(Ø380)
(R:INSIDE)
(S:OUTSIDE)
End section
Blank section
(10 pockets min.)
Lead section (400 mm min.)
Mounting section
Embossed carrier tape
Blank section
(10 pockets min.)
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
8
M±0.3
P±0.1
N±0.1
(Q)
1.7+0.15
0
(3)
(3.8)
M±0.3
(Q)
(0.3)
N±0.1
8±0.1
8±0.1
(0.3)
1.75±0.1
+
0
0 .1
Ø1
.5
4±0.1 2±0.15
(1.7)
Ø1
.5 +
4±0.1 2±0.15
(1.7)
1.75±0.1
(Tape width 32mm and over)
0
0 .1
(Tape width up to 24mm)
Top cover tape
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Unit: mm
Part Number
CL No.
580-1301-1-**
FH33-6S-0.5SH (**)
580-1303-7-**
FH33-9S-0.5SH (**)
580-1304-0-**
FH33-10S-0.5SH (**)
580-1302-4-**
FH33-12S-0.5SH (**)
580-1305-2-**
FH33-14S-0.5SH (**)
580-1307-8-**
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
580-1317-1-**
580-1306-5-**
FH33-26S-0.5SH (**)
580-1300-9-**
FH33-28S-0.5SH (**)
580-1312-8-**
FH33-30S-0.5SH (**)
580-1310-2-**
FH33-32S-0.5SH (**)
580-1311-5-**
FH33-36S-0.5SH (**)
580-1308-0-**
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
580-1316-9-**
580-1319-7-**
FH33M-16S-0.4SH (**)
580-1329-0-**
FH33J-4S-0.5SH (**)
580-1324-7-**
FH33J-10S-0.5SH (**)
580-1328-8-**
FH33J-12S-0.5SH (**)
580-1331-2-**
FH33J-16S-0.5SH (**)
580-1334-0-**
FH33J-18S-0.5SH (**)
580-1332-5-**
FH33J-19S-0.5SH (**)
580-1330-0-**
FH33J-40S-0.5SH (**)
580-1325-0-**
FH33MHJ-65S-0.4SH (**)
580-1322-1-**
FH33-4S-1SH (**)
580-1323-4-**
FH33-12(6)S-1SH (**)
580-1326-2-**
FH33J-12(6)S-1SH (**)
Note 1: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
Number of Contacts
M
N
P
Q
R
S
6
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
10
12
16
18
19
40
65
4
6
6
16
16
16
16
16
24
24
24
24
24
32
32
44
44
24
16
16
16
24
24
24
44
44
16
16
16
7.5
7.5
7.5
7.5
7.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
11.5
7.5
7.5
7.5
11.5
11.5
11.5
20.2
20.2
7.5
7.5
7.5
----------------------------------------------------------------------28.4
28.4
40.4
40.4
-------------------------------------------------40.4
40.4
----------------------
5.3
6.8
7.3
8.3
9.3
11.8
12.3
15.3
16.3
17.3
18.3
20.3
22.3
24.8
8.6
4.3
7.3
8.3
10.3
11.3
11.8
22.3
28.2
6.8
8.3
8.3
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
25.4
17.4
17.4
17.4
25.4
25.4
25.4
45.4
45.4
17.4
17.4
17.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
29.4
21.4
21.4
21.4
29.4
29.4
29.4
49.4
49.4
21.4
21.4
21.4
9
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Recommended Temperature Profile
●Using Lead-free Solder paste
HRS test conditions
MAX 250ç
Solder method : Reflow, IR/hot air
Environment
250
230ç
: Room air
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
Temperature
(Senju Metal Industry, Co., Ltd.’s Part Number: M705-221CM5-32-10.5)
200
200ç
Test board
: Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions : Contacts lead 0.3mm∞0.65mm
Metal fittings 0.55mm∞0.8mm
150
150ç
Metal mask
(ç)
: Contacts lead 0.25mm∞0.65mm∞0.1mm thick
Metal fittings 0.55mm∞0.8mm∞0.1mm thick
100
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
50
depending on solder paste type, volume/thickness and board
25ç
(60 sec.)
90 to 120 sec.
(60 sec.)
Preheating
Sodering
manufacturer for specific recommendations.
0
Start
Time (Seconds)
10
size/thickness. Consult your solder paste and equipment
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
■Operation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
11
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Removing FPC
Pay attention to the following points when inserting FPC.
SActuator operation
1 Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
Damege to the contacts
Damage to the contacts
2 Axis of rotation
0˚)
(12
Axis of rotation
Assure free rotation of
the actuator
3 The actuator will rotate 120 degrees
maximum. Do not force it to rotate further.
12
0°
12
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
4 When operating the actuator, do so at the
center portion.
5 As illustrated, do not attempt removal or re-
positioning of the actuator.
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as shown),
then completely inserted.
Actuator
Perpendicular with
the connector
FPC
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
SFPC Insertionw
When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion entrance.
Doing so will result in the contacts and FPC making strong contact and may cause deformation of the
contacts, peeling of the FPC conductor, and other problems.
Peeling of FPC
conductor
13
FH33 Series●0.4mm,0.5 mm,1mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.15N max. in the upward direction (as illustrated). Do not bend the FPC
too close to the actuator.
Load: 0.15N max.
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 120°). Carefully withdraw the FPC.
0°
12
Other Precautions
SHand Soldering Precautions
When hand soldering:
1 Do not perform reflow or hand soldering with the FPC inserted in the connector.
2 Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
3 Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
14
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
NOTES :
15
FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
20400 Stevens Creek Blvd., Ste 250, Cupertino,
CA 95014
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hiroseeurope.com
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : +44-1908-369060
Fax : +44-1908-369078
http://www.hirose.co.uk
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
TAIWAN:
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No.03, Ground Floor, Explorer Building International Tech
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
®
16
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 03/2012. Contents are subject to change without notice for the purpose of improvements.
Similar pages