Kemet FLLD3320APVI1 High-current 3-phase emc filter Datasheet

FLLD3 … PV
High-current 3-phase EMC Filter
Overview
The three phase filter series is intended to be used in energy conversion inverter systems (e.g. photo voltaic and wind power), between the
inverter and the line or in motor drive systems. The filters are optimized for geometry and power loss.
As the Capacitance Company, KEMET is only using high quality capacitors in its filter series.
Technical specifications
Rated voltage
Rated current
Leakage current
Rated temperature
Temperature range
Climate category
Voltage test
520 VAC
150 – 2500 A
< 5 mA *)
50°C
-40°C to +100°C
40/100/21
P -> P 2250 VDC
P -> E 3000 VDC
The FLLE2…PV-series is designed according
to IEC/EN 60939 and UL 1283.
Power loss
@ 25°C/DC
(W)
Weight
(kg)
FLLD3150APVI2
150
25
6
FLLD3180APVI2
180
35
6
FLLD3250APVI2
250
45
7
FLLD3320APVI1
320
15
10
FLLD3400APVI1
400
25
10
L1
L1
FLLD3600APVI1
600
40
11
L2
L2
FLLD3800APVI1
800
50
17
L3
L3
FLLD31K0APV1
1000
75
17
FLLD31K6APVI1
1600
130
26
FLLD32K5APVI1
2500
250
55
PE
PE
LINE
Rated current
@ 50°C
(A)
Filter
Typical insertion loss
dB 100
Sym
Asym
dB 100
Sym
Asym
dB 100
80
80
80
60
60
60
40
40
40
20
20
20
0
0.01
0.1
1
10
150 to 250 A
100
MHz
0
0.01
0.1
1
10
320 to 1000 A
100
MHz
0
0.01
Sym
0.1
Asym
1
10
100
MHz
1600 and 2500 A
KEMET EMC Filters
1
LOAD
*) Maximum leakage current under normal operating conditions.
If two phases are interrupted, leakage current can be much higher.
FLLD3 … PV
High-current 3-phase EMC Filter
Mechanical dimensions
FLLD3 … PVI1 Busbar connections
Z
L
FLLD3 … PVI2 Threaded terminals
Z
W
L
W
M
U U
U U
H
Y
H
X
W1 W2
L1
ØN
L1
Ø12 (x6)
ØN
L1
L1
ØN
K
K
I
J I
J I
320 to 1000A
1600 A
2500 A
Filter
W1 W2
Dimensions in mm
L
W
H
L1
W1
W2
U
X
Y
Z
I
J
K
N
M
FLLD3150APVI2
300
160
120
120
185
210
50
M10
FLLD3180APVI2
300
160
120
120
185
210
50
M10
FLLD3250APVI2
300
180
125
120
205
230
55
M12
FLLD3320APVI1
300
210
115
120
235
260
60
6
25
45
15
10.5
M12
FLLD3400APVI1
300
210
115
120
235
206
60
6
25
45
15
10.5
M12
FLLD3600APVI1
300
210
135
120
235
260
60
8
25
45
15
10.5
M12
FLLD3800APVI1
350
230
170
145
255
280
60
8
40
55
20
14
M12
FLLD31K0APVI1
350
230
170
145
255
280
60
8
40
55
20
14
M12
FLLD31K6APVI1
400
250
170
170
275
300
60
10
60
95
17
26
26
14
M12
FLLD32K5APVI1
600
300
200
250
330
370
100
15
100
100
20
35
35
14
M16
Legal disclaimer notice
All product specifications, statements, information and data (collectively, the “information”)
are subject to change without notice.
the use of our products is given gratis, and we assume no obligation or liability for the
advice given or results obtained.
All information given herein is believed to be accurate and reliable, but is presented without
guarantee, warranty, or responsibility of any kind, expressed or implied.
Although we design and manufacture our products to the most stringent quality and safety
standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that failure of an electrical component does not result in a
risk of personal injury or property damage.
Statements of suitability for certain applications are based on our knowledge of typical
operating conditions for such applications, but are not intended to constitute – and we
specifically disclaim – any warranty concerning suitability for a specific customer application
or use. This information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their applications. Any
technical advice inferred from this information or otherwise provided by us with reference to
Although all product-related warnings, cautions and notes must be observed, the customer
should not assume that all safety measures are indicated or that other measures may not
be required
KEMET EMC Filters
2
Similar pages