Fairchild FM809MS3X 3-pin uc supervisor circuit Datasheet

FM809/810
3-Pin µC Supervisor Circuits
General Description
■ 140ms power-on RESET delay (minimum)
■ RESET operation guaranteed to 1.0V
■ Supply current only 2µA
■ No external components
■ Operating Range
– -40°C to +105°C (SOT23)
– -40°C to +85°C (SC70)
■ SOT23-3 and SC70-3 packages
The FM809/810 are supervisor circuits that monitor power
supply or other system voltages and issue reset pulse whenever
the voltage being monitored is out of tolerance. Once asserted,
the reset pulse is guaranteed to be valid for a minimum of
140ms (256ms typical). FM809xx offers active low push-pull
type of reset while FM810xx offers active high push-pull type.
Several threshold voltages are offered to accommodate 5.0V,
3.3V, 3.0V and 2.7V system voltages.
The low supply current (typically 2 µA)recommends FM809/810
devices for portable designs or wherever power saving is
primary.
Applications
■
■
■
■
■
These devices are offered in space saving 3-pin SOT23 and
SC70 packages.
Features
■ VTH voltages of 4.63V, 4.38V, 4.00V, 3.08V, 2.93V and 2.63V
■ RESET (FM809) or RESET (FM810) output
Microcontrollers and Microprocessors
Appliances
Power-Supply Monitoring
Portable Equipment
Automotive Systems
Typical Operating Circuit
VCC
VCC
FM809
µC
RESET
RESET
I/P
GND
GND
Connection Diagram
GND
1
3
RESET (809) or
RESET (810)
VCC
2
FM809/810
SOT23-3 & SC70-3Packages
©2005 Fairchild Semiconductor Corporation
FM809/810 Rev. G
1
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
August 2005
Voltage on any terminal relative to GND
VCC
RESET, RESET
Input Current
Output Current: RESET, RESET
ESD Rating
Human Body Model
>2KV
Machine Model
>200KV
100V/µs
Rate of Rise of VCC
Continuous Power Dissipation (TA = +70°C)
20mA
SOT23-3 (derate 4mW/°C above +70°C)
320mW
Operating Temperature Range
-40°C to +105°C
Storage Temperature Range
-65°C to +150°C
Lead Temperature (soldering, 10s)
+300°C
These are stress ratings only, and functional operation is not implied for these levels or beyond. Exposure to Absolute Maximum
Rating conditions for extended periods may affect device reliability.
-0.3V to +6.0V
-0.3V to (VCC + 0.3V)
20mA
Electrical Characteristics SOT23 Package (TA = 25°C unless otherwise noted)
VCC = full range, as noted under conditions. See Note 1.
Parameter
Symbol
Operating Voltage
VCC
Supply Current
ICC
Reset Threshold
VTH
Conditions
Min
TA = 0°C to +70°C
1.0
TA = -40°C to 105°C
1.1
10
TA = -40°C to 105°C, VCC < 3.6V
FM809R/S/T
2
6
FM8xxL
TA = -40°C to +105°C
4.40
4.63
4.86
FM8xxM
TA = -40°C to +105°C
4.18
4.38
4.52
FM8xxJ
TA = -40°C to +105°C
3.90
4.00
4.18
FM8xxT
TA = -40°C to +105°C
2.97
3.08
3.19
FM8xxS
TA = -40°C to +105°C
2.79
2.93
3.00
FM8xxR
TA = -40°C to +105°C
2.49
2.63
2.70
30
VCC = VTH to (VTH - 100mV)
Reset Active Timout Period
TA = -40°C to +105°C
VOL
VOH
FM810 Output Low (RESET)
VOL
VOH
µA
V
ppm/°C
10
15
µs
256
560
ms
VCC = VTH(min), ISINK = 1.2mA,
FM809R/S/T
0.3
V
VCC = VTH(min), ISINK = 3.2mA,
FM809J/L/M
0.4
140
VCC = < 1.0V, ISINK = 50µA
FM809 Output High (RESET)
V
5.5
5
VCC to Reset Delay (Note 2)
FM810 Output High (RESET)
5.5
TA = -40°C to 105°C, VCC < 5.5V
FM809J/L/M
Reset Threshold Tempco
FM809 Output Low (RESET)
Typ
(Note 3) Max Units
0.3
VCC > VTH(max), ISOURCE = 500µA (R/S/T)
0.8VCC
VCC > VTH(max), ISOURCE = 800µA (J/M/L)
VCC - 1.5V
V
VCC = VTH(max), ISINK = 1.2mA,
FM810R/S/T
0.3
VCC = VTH(max), ISINK = 3.2mA,
FM810J/L/M
0.4
1.8V < VCC < VTH(min), ISOURCE = 150µA
0.8VCC
V
V
Note 1: Testing in production is 25°C only. VCC = 5V for FM8xxL/M/J, VCC = 3.3V for FM8xxT/S and VCC = 3V for FM8xxR. Limits over temperature are guaranteed by design.
Note 2: RESET output is for FM809. RESET output is for FM810.
Note 3: Typical values are at 25°C.
Note 4: Recommended minimum slew rate for the VCC rampup is 200mV/sec in the 0 to 2V range for the device to function properly.
2
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Absolute Maximum Ratings
ESD Rating
Human Body model
1.5KV
Machine model
>200KV
100V/µs
Rate of Rise of VCC
20mA
Continuous Power Dissipation (TA = +70°C)
SC70-3
174mW
Operating Temperature Range
-40°C to +85°C
Storage Temperature Range
-65°C to +150°C
Lead Temperature (soldering, 10s)
+300°C
These are stress ratings only, and functional operation is not implied for these levels or beyond. Exposure to Absolute Maximum
Rating conditions for extended periods may affect device reliability.
-0.3V to +6.0V
-0.3V to (VCC + 0.3V)
20mA
Electrical Characteristics SC70 Package (TA = 25°C unless otherwise noted)
VCC = full range, as noted under conditions. See Note 1.
Parameter
Operating Voltage
Supply Current
Reset Threshold
Symbol
VCC
ICC
VTH
Conditions
Min
TA = 0°C to +70°C
1.4
5.5
TA = -40°C to 85°C
1.6
5.5
TA = -40°C to 85°C, VCC < 5.5V FM809J/L/M
9
15
TA = -40°C to 85°C, VCC < 3.6V FM809R/S/T
6
10
FM8xxL
TA = -40°C to +85°C
4.40
4.63
4.86
FM8xxM
TA = -40°C to +85°C
4.18
4.38
4.52
FM8xxJ
TA = -40°C to +85°C
3.90
4.00
4.18
FM8xxT
TA = -40°C to +85°C
2.97
3.08
3.19
FM8xxS
TA = -40°C to +85°C
2.79
2.93
3.00
FM8xxR
TA = -40°C to +85°C
2.49
2.63
2.70
Reset Threshold Tempco
30
VCC to Reset Delay (Note 2)
VCC = VTH to (VTH - 100mV)
Reset Active Timout Period
FM809 Output Low (RESET)
FM809 Output High (RESET)
FM810 Output Low (RESET)
FM810 Output High (RESET)
Typ
(Note 3) Max Units
TA = -40°C to +85°C
VOL
VOH
VOL
VOH
10
100
µA
V
ppm/°C
15
µs
560
ms
VCC = VTH(min), ISINK = 1.2mA, FM809R/S/T
0.35
V
VCC = VTH(min), ISINK = 3.2mA, FM809J/L/M
0.4
VCC = < 1.0V, ISINK = 50µA
0.3
VCC > VTH(max), ISOURCE = 500µA (R/S/T)
0.8VCC
VCC > VTH(max), ISOURCE = 800µA (J/M/L)
VCC - 1.5V
256
V
V
VCC = VTH(max), ISINK = 1.2mA, FM810R/S/T
0.35
VCC = VTH(max), ISINK = 3.2mA, FM810J/L/M
0.4
1.8V < VCC < VTH(min), ISOURCE = 150µA
0.8VCC
V
V
Note 1: Testing in production is 25°C only. VCC = 5V for FM8xxL/M/J, VCC = 3.3V for FM8xxT/S and VCC = 3V for FM8xxR. Limits over temperature are guaranteed by design.
Note 2: RESET output is for FM809. RESET output is for FM810.
Note 3: Typical values are at 25°C.
3
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Absolute Maximum Ratings
Voltage on any terminal relative to GND
VCC
RESET, RESET
Input Current
Output Current: RESET, RESET
Pin Number
Name
1
GND
2
RESET*
3
VCC
Function
GROUND
RESET (RESET) remains LOW (HIGH) while VCC is below VTH,
and for at least 140ms after VCC rises above VTH.
* with overbar, FM809 (RESET); without, FM810 (RESET).
Circuit Timing (e.g.: FM809)
INPUT
5V
VTH
1V
GND
OUTPUT
5V
VTH
1V
GND
140ms
When operating properly with 5V in (for example), VOUT will also
be about 5V. When VIN starts to fall, VOUT will follow it down as
shown. When VIN drops below VTH, VOUT drops to ground
("issues a RESET") and stays there unless VIN also falls below
its minimum operating voltage, approx. 1V. At this point, the
supervisor loses control, and its output may rise, only to again
follow VIN down to the ground.
When VIN begins to rise, VOUT follows it until 1.0V or so is
reached, whereupon the device regains control, VOUT is pulled
to ground, etc. When VIN rises above VTH, VOUT comes out of
RESET 140 ms later.
If it is required that a lower value than GND + 1.0V is needed
on RESET signal during VCC ≤ 1V, a 100K resistor may be used
on the device output (to GND for the FM809, to VCC for the
FM810).
4
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Pin Descriptions
Part Number
Top Marking
RESET
Threshold (V)
Output Type
Package Type
Packing
Method
FM809LS3X
09L
4.63
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809MS3X
09M
4.38
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809JS3X
09J
4.00
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809TS3X
09T
3.08
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809SS3X
09S
2.93
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809RS3X
09R
2.63
Push-Pull, active LOW
3-Pin, SOT23
3000 units in T&R
FM809LP3X
VLY
4.63
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
FM809MP3X
VMY
4.38
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
FM809JP3X
VJY
4.00
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
FM809TP3X
VTY
3.08
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
FM809SP3X
VSY
2.93
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
FM809RP3X
VRY
2.63
Push-Pull, active LOW
3-Pin, SC70
3000 units in T&R
Note 4: Devices listed above feature 250ms typical Reset Pulse width. Consult Fairchild sales for other reset pulse width options.
Note 5: For the SC70 package, the third character of the top marking, identified as “Y” in the above table, identifies wafer lot code.
5
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Ordering Information (FM809)
Part Number Top Marking
RESET
Threshold (V)
Output Type
Package Type
Packing
Method
FM810LS3X
10L
4.63
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810MS3X
10M
4.38
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810JS3X
10J
4.00
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810TS3X
10T
3.08
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810SS3X
10S
2.93
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810RS3X
10R
2.63
Push-Pull, active HIGH
3-Pin, SOT23
3000 units in T&R
FM810LP3X
ZLY
4.63
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
FM810MP3X
ZMY
4.38
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
FM810JP3X
ZJY
4.00
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
FM810TP3X
ZTY
3.08
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
FM810SP3X
ZSY
2.93
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
FM810RP3X
ZRY
2.63
Push-Pull, active HIGH
3-Pin, SC70
3000 units in T&R
Note 6: Devices listed above feature 250ms typical Reset Pulse width. Consult Fairchild sales for other reset pulse width options.
Note 7: For the SC70 package, the third character of the top marking, identified as “Y” in the above table, identifies wafer lot code.
6
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Ordering Information (FM810)
FM809/810 3-Pin µC Supervisor Circuits
Physical Dimensions inches (millimeters) unless otherwise noted
0.021
0.015
0.055
0.047
0.098
0.083
0.120
0.105
0.0059
0.0035
0.040
0.031
0.079
0.071
0-8˚
0.010
0.005
0.004
0.001
0.76
2.29
PKG
CL
0.76
0.95
LAND PATTERN RECOMMENDATION
SOT-23 Package Dimensions
FS Pkg Code AU
7
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
Physical Dimensions inches (millimeters) unless otherwise noted
.087 (2.2)
.071 (1.8)
.053 (1.35)
.045 (1.15)
.087 (2.2)
.079 (2.0)
.009 (.23)
.005 (.13)
.043 (1.1)
.032 (.80)
.004 (.10)
.010 (.25)
.004 (.10)
.016 (.40)
.012 (.30)
.026
(.65)
.018 (.45)
.006 (.15)
.052
(1.3)
0.65
1.80
0.65
0.6
0.5
Land Pattern Recommendation
SC70 Package Dimensions
8
FM809/810 Rev. G
www.fairchildsemi.com
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST
ActiveArray™
FASTr™
Bottomless™
FPS™
Build it Now™
FRFET™
CoolFET™
GlobalOptoisolator™
CROSSVOLT™ GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
2
E CMOS™
i-Lo™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench
QFET
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
SILENT SWITCHER
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic
TINYOPTO™
TruTranslation™
UHC™
UltraFET
UniFET™
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I16
9
FM809/810 Rev. G
www.fairchildsemi.com
FM809/810 3-Pin µC Supervisor Circuits
TRADEMARKS
Similar pages