Rectron FMD1S Single-phase glass passivated mini fast recovery surface mount bridge rectifier (voltage range 50 to 1000 volts current 0.8 ampere) Datasheet

RECTRON
FMD1S
SEMICONDUCTOR
THRU
TECHNICAL SPECIFICATION
SINGLE-PHASE GLASS PASSIVATED
MINI FAST RECOVERY SURFACE MOUNT BRIDGE RECTIFIER
FMD7S
VOLTAGE RANGE 50 to 1000 Volts CURRENT 0.8 Ampere
FEATURES
* Surge overload rating - 30 amperes peak
* Ideal for printed circuit board
* Reliable low cost construction utilizing molded
* Glass passivated device
* Polarity symbols molded on body
* Mounting position: Any
* Weight: 0.5 gram
MD-S
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in millimeters
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)
SYMBOL
FMD1S
FMD2S
FMD3S
FMD4S
FMD5S
FMD6S
FMD7S
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
RATINGS
Maximum Average Forward Output Rectified
Current TA = 30oC
-on glass-epoxy P.C.B. ( NOTE 1 )
-on aluminum substrate ( NOTE 2 )
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
0.5
IO
Amp
0.8
IFSM
30
Amps
pF
Typical Junction Capacitance ( Note3 )
CJ
15
Operating and Storage Temperature Range
TJ,TSTG
-55 to + 150
0
C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS
SYMBOL
Maximum Forward Voltage Drop per Bridge
Element at 0.4A DC
FMD2S
FMD3S
@TA = 25 C
DC Blocking Voltage per element
@TA = 125oC
IR
trr
FMD4S
FMD5S
FMD6S
FMD7S
1.30
o
Maximum Reverse Current at rated
Maximum Reverse Recovery Time ( Note 4 )
FMD1S
VF
150
UNITS
Volts
10
uAmps
100
uAmps
250
500
NOTE: 1. On glass-epoxy P.C.B. mounted on 0.05 X 0.05” (1.3 X 1.3mm) pads.
2. On aluminum substrate P.C.B. with an area of 0.8 X 0.8 X 0.25” (20 X 20 X 6.4mm) mounted on 0.05 X 0.05” (1.27 X 1.27mm) solder pad.
3. Measured at 1MHz and applied reverse voltage of 4.0 volts.
4. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A.
5. Suffix “-S” Surface Mount for Mini Dip Bridge.
nSec
1998-8
RECTRON
Similar pages