Fairchild FOD0738R1 Single/dual channel cmos optocoupler Datasheet

FOD0708 Single Channel CMOS Optocoupler
FOD0738 Dual Channel CMOS Optocoupler
Features
General Description
■
■
■
■
■
■
■
■
■
The FOD0708 and FOD0738 optocouplers consist of an
AlGaAs LED optically coupled to a high speed transimpedance amplifier and voltage comparator. These
optocouplers utilize the latest CMOS IC technology to
achieve outstanding performance with very low power
consumption. The devices are housed in a compact
8-pin SOIC package for optimum mounting density.
+5 V CMOS compatibility
15 ns typical pulse width distortion
30 ns max. pulse width distortion
40 ns max. propagation delay skew
High speed: 15 MBd
60 ns max. propagation delay
10 kV/µs minimum common mode rejection
–40°C to 100°C temperature range
UL approved (file #E90700)
Applications
■
■
■
■
Line receivers
Pulse transformer replacement
Output interface to CMOS-LSTTL-TTL
Wide bandwidth analog coupling
Package Dimensions
SEATING PLANE
0.164 (4.16)
0.144 (3.66)
Pin 1
0.202 (5.13)
0.182 (4.63)
0.019 (0.48)
0.010 (0.25)
0.006 (0.16)
0.143 (3.63)
0.123 (3.13)
0.244 (6.19)
0.224 (5.69)
0.008 (0.20)
0.003 (0.08)
0.021 (0.53)
0.011 (0.28)
0.050 (1.27)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
NC
1
8
VDD
ANODE 1
1
8
VDD
ANODE
2
7
NC
CATHODE 1
2
7
VO 1
CATHODE
3
6
VO
CATHODE 2
3
6
VO 2
NC
4
5
GND
ANODE 2
4
5
GND
FOD0708
©2005 Fairchild Semiconductor Corporation
FOD0708 Single Channel CMOS Optocoupler Rev. 1.0.7
TRUTH TABLE
LED
VO OUTPUT
OFF
ON
H
L
Note: A 0.1µF bypass capacitor
must be connected between
pins 5 and 8.
FOD0738
1
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
April 2006
Symbol
Parameter
Min.
Max.
Units
TS
Storage Temperature
–40
+125
°C
TA
Ambient Operating Temperature
–40
+100
°C
VDD
Supply Voltages
0
6
Volts
VO
Output Voltage
–0.5
VDD + 0.5
Volts
IO
Average Output Current
2
mA
IF
Average Forward Input Current
20
mA
Lead Solder Temperature
260°C for 10 sec., 1.6 mm below seating plane
Solder Reflow Temperature Profile
See Solder Reflow Temperature Profile Section
LED Power Dissipation
Single Channel
Dual Channel
40 mW (derate above 95°C, 1.4 mW/°C)
40 mW per channel (derate above 90°C, 1.2 mW/°C)
Detector Power Dissipation
Single Channel
Dual Channel
85 mW (derate above 75°C, 1.8 mW/°C)
65 mW per channel (derate above 90°C, 2.0 mW/°C)
Recommended Operating Conditions
Symbol
Parameter
Min.
Max.
Units
TA
Ambient Operating Temperature
–40
+100
°C
VDD
Supply Voltages
4.5
5.5
Volts
IF
Input Current (ON)
10
16
mA
Electrical Characteristics (TA = –40°C to +100°C) and 4.5 V ≤ VDD ≤ 5.5 V
Symbol
Test
Conditions
Parameter
Min. Typ.* Max. Units Fig.
VF
Input Forward Voltage
IF = 12 mA
1.3
BVR
Input Reverse Breakdown Voltage
IR = 10 µA
5
4.0
1.45
1.8
V
9
V
VOH
Logic High Output Voltage
IF = 0, IO = –20 µA
VOL
Logic Low Output Voltage
IF = 12 mA,
IO = 20 µA
0.01
5.0
0.1
V
V
ITH
Input Threshold Current
(FOD0708)
(FOD0738)
IOL = 20 µA
4.0
4.4
8.2
8.2
mA
1,5
IDDL
Logic Low Output Supply Current
(FOD0708)
(FOD0738)
IF = 12 mA
3.4
6.9
14.0
18.0
mA
3,7
IDDH
Logic High Output Supply Current
(FOD0708)
(FOD0738)
IF = 0
3.7
7.5
11.0
15.0
mA
4,8
*All typicals at TA = 25°C and VDD = 5V unless otherwise noted.
2
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Absolute Maximum Ratings TA = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min.
Typ.* Max.
Units
tPHL
Propagation Delay Time to
Logic Low Output
IF = 12 mA, CL = 15 pF
CMOS Signal Levels, note 1, fig. 10
20
60
ns
tPLH
Propagation Delay Time to
Logic High Output
IF = 12 mA, CL = 15 pF FOD0708
CMOS Signal Levels,
FOD0738
note 1, fig. 10
13
60
ns
11
60
PW
Pulse Width
100
ns
| PWD |
Pulse Width Distortion
IF = 12 mA, CL = 15 pF
CMOS Signal Levels, note 2
tPSK
Propagation Delay Skew
IF = 12 mA, CL = 15 pF
CMOS Signal Levels, note 3
tR
Output Rise Time (10%–90%) IF = 12 mA, CL = 15 pF
CMOS Signal Levels
12
ns
tF
Output Fall Time (90%–10%)
IF = 12 mA, CL = 15 pF
CMOS Signal Levels
8
ns
| CMH |
Common Mode Transient
Immunity at Logic High
Output
VCM = 1000 V, TA = 25°C, IF = 0 mA,
note 4, fig. 11
25
50
kV/µs
| CML |
Common Mode Transient
VCM = 1000 V, TA = 25°C, IF = 12 mA,
Immunity at Logic Low Output note 5, fig. 11
25
50
kV/µs
0
30
ns
40
ns
*All typicals at TA = 25°C and VDD = 5V unless otherwise noted.
Isolation Characteristics (TA = -40°C to +100°C Unless otherwise specified.)
Characteristics
Test Conditions Symbol
Min
Typ.**
II-O
Max
Unit
1.0
µA
Input-Output Insulation
Leakage Current
(Relative humidity = 45%)
(TA = 25°C, t = 5 s)
(VI-O = 3000 VDC) (Note 6)
Withstand Insulation
Test Voltage
(II-O ≤ 10 µA, RH < 50%,
TA = 25°C) (t = 1 min.) (Note 6)
VISO
Resistance (Input to Output)
(VI-O = 500 V) (Note 6)
RI-O
1012
Ω
Capacitance (Input to Output)
(f = 1 MHz) (Note 6)
CI-O
0.6
pF
2500
VRMS
** All typical values are at VCC = 5 V, TA = 25°C
Notes:
1. Propagation delay time, high to low (tPHL), is measured from the 50% level on the rising edge of the input pulse to the 2.5V level
of the falling edge of the output voltage signal. Propagation delay time, low to high (tPLH), is measured from the 50% level on the
falling edge of the input pulse to the 2.5V level of the rising edge of the output voltage signal.
2. Pulse width distoration is defined as the absolute difference between the high to low and low to high propagation delay times,
| tPHL – tPLH |.
3. Propagation delay skew, tPSK, is defined as the worst case difference in tPHL or tPLH between units within the recommended
operating range of the device.
4. CMH – The maximum tolerated rate of rise of the common mode voltage to ensure the output will remain in the high state,
(i,e., VOUT > 2.0V) Measured in kilovolts per microsecond (kV/µs).
5. CML – The maximum tolerated rate of fall of the common mode voltage to ensure the output will remain in the low state,
(i,e., VOUT < 0.8V). Measured in kilovolts per microsecond (kV/µs).
6. Isolation voltage, VISO, is an internal device dielectric breakdown rating. For this test, pins 1,2,3,4 are common, and pins 5,6,7,8
are common.
3
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Switching Characteristics Over recommended temperature (TA = –40°C to +100°C) and
4.5 V ≤ VDD ≤ 5.5 V. All typical specifications are at TA = 25°C, VDD = +5 V.
Figure 1. FOD0708
Typical Input Threshold Current
vs Ambient Temperature
Figure 2. FOD0708
Typical Switching Speed vs Pulse Input Current
100
VDD = 5V
o
TA = 25 C
VDD = 5V
IOL = 20µA
80
6
tP - Propagation Delay (ns)
ITH - Input Threshold Current (mA)
7
5
4
60
tPHL
40
tPLH
20
3
PWD
0
2
5
-40
-20
0
20
40
60
80
7
100
o
TA - Ambient Temperature ( C)
Figure 3. FOD0708
Typical Logic Low Output Supply Current
vs Ambient Temperature
11
13
15
Figure 4. FOD0708
Typical Logic High Output Supply Current
vs Ambient Temperature
5.0
IDDH - Logic High Output Supply Current (mA)
5.0
IDDL - Logic Low Output Supply Current (mA)
9
IF - Pulse Input Current (mA)
VDD = 5V
IF = 12mA
4.5
4.0
3.5
3.0
2.5
2.0
VDD = 5V
4.5
4.0
3.5
3.0
2.5
2.0
-40
-20
0
20
40
60
80
100
-40
TA - Ambient Temperature (oC)
0
20
40
60
80
100
TA - Ambient Temperature (oC)
4
FOD0708/FOD0738 Rev. 1.0.7
-20
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Typical Characteristics
Figure 5. FOD0738
Typical Input Threshold Current
vs Ambient Temperature
Figure 6. FOD0738
Typical Switching Speed vs Pulse Input Current
7
VDD = 5V
o
TA = 25 C
Channel 2
6
Channel 1
Channel 2
80
tP - Propagation Delay (ns)
ITH - Input Threshold Current (mA)
100
Channel 1
VDD = 5V
IOL = 20µA
5
4
3
60
tPHL
40
tPLH
20
PWD
0
2
-40
-20
0
20
40
60
80
5
100
7
o
11
13
15
Figure 8. FOD0738
Typical Logic High Output Supply Current
vs Ambient Temperature
Figure 7. FOD0738
Typical Logic Low Output Supply Current
vs Ambient Temperature
8.5
IDDH - Logic High Output Supply Current (mA)
8.5
IDDL - Logic Low Output Supply Current (mA)
9
IF - Pulse Input Current (mA)
TA - Ambient Temperature ( C)
VDD = 5V
IF = 12mA
8.0
7.5
7.0
6.5
6.0
VDD = 5V
8.0
7.5
7.0
6.5
6.0
5.5
5.5
-40
-20
0
20
40
60
80
-40
100
5
FOD0708/FOD0738 Rev. 1.0.7
-20
0
20
40
60
80
100
TA - Ambient Temperature (oC)
TA - Ambient Temperature (oC)
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Typical Characteristics (Continued)
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Typical Characteristics (Continued)
Figure 9. Input Forward Current vs. Forward Voltage
100
IF - Forward Current (mA)
10
TA = 100oC
1
TA = -40oC
TA = 85oC
0.1
TA = 0oC
TA = 25oC
0.01
0.001
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
VF - Forward Voltage (V)
6
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
Pulse Gen.
ZO = 50 Ω
tf = tr = 5 ns
Vcc
IF = 12mA
1
1
8
IF
2
Input
Monitor
Node
RIN
3
Output
Monitoring
Node
6
4
Input
Monitoring
Node
0.1µF
7
Input
Vcc
IF
8
2
7
3
6
4
5
RIN
5
50%
t PHL
tPLH
Output
Monitoring
Node
0.1µF
Bypass
90%
90%
Output
2.5V CMOS
10%
10%
tf
Test Circuit for FOD0708
tr
Test Circuit for FOD0738
VOL
Waveforms
Fig. 10 Test Circuit and Waveforms for tPLH, tPHL, tr and tf.
IF
1
Dual Channel
VCC
+5V
8
B
A
IF
A
2
7
3
6
0.1µF
bypass
4
Output
(VO)
5
GND
8
+5V
2
7
Output VO
Monitoring
Node
3
6
4
5
VFF
B
VFF
1
0.1µF
Bypass
VCM
+
–
Pulse
Generator
ZO = 50Ω
VCM
Pulse Gen
Test Circuit for FOD0708
Test Circuit for FOD0738
Peak
VCM
0V
CM H
VOH
Switching Pos. (A), IF = 0
VO
VO (Min)
VO (Max)
Switching Pos. (B), IF = 12 mA
VO
VOL
CM L
Fig. 11 Test Circuit Common Mode Transient Immunity
(FOD0708 and FOD0738)
7
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Pulse Gen.
tf = tr = 5 ns
ZO = 50 Ω
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
8-Pin Small Outline
0.024 (0.61)
0.060 (1.52)
0.275 (6.99)
0.155 (3.94)
0.050 (1.27)
8
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Ordering Information
Option
Order Entry Identifier
Description
No Suffix
FOD0708
Shipped in tubes (50 units per tube)
R1
FOD0708R1
Tape and Reel (500 units per reel)
R2
FOD0708R2
Tape and Reel (2500 units per reel)
Marking Information
1
0708
V
3
X YY S
2
6
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE option –
See order entry table)
4
One digit year code, e.g., ‘5’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
9
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
8.0 ± 0.10
3.50 ± 0.20
2.0 ± 0.05
Ø1.5 MIN
4.0 ± 0.10
0.30 MAX
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.10
5.20 ± 0.20
Ø1.5 ± 0.1/-0
6.40 ± 0.20
0.1 MAX
User Direction of Feed
Reflow Profile
300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
°C
Time above
183°C = 90 Sec
160
140
120
1.822°C/Sec Ramp up rate
100
80
60
40
33 Sec
20
0
0
60
120
180
270
360
Time (s)
10
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
Carrier Tape Specification
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST®
ActiveArray™
FASTr™
Bottomless™
FPS™
Build it Now™
FRFET™
CoolFET™
GlobalOptoisolator™
CROSSVOLT™ GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
2
E CMOS™
i-Lo™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise®
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UltraFET®
UniFET™
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I18
11
FOD0708/FOD0738 Rev. 1.0.7
www.fairchildsemi.com
FOD0708 Single Channel CMOS Optocoupler FOD0738 Dual Channel CMOS Optocoupler
TRADEMARKS
Similar pages