Fairchild FODM452R1 5-pin mini flat package high speed transistor optocoupler Datasheet

FODM452, FODM453
5-Pin Mini Flat Package High Speed Transistor
Optocoupler
tm
Features
Description
■ Compact 5-pin mini flat package
The FODM452 and FODM453 optocouplers consist of
an AlGaAs LED optically coupled to a high speed photodetector transistor. The devices are housed in a compact
5-pin mini flat package for optimum mounting density.
The FODM453 features a high CMR rating for optimum
common mode transient immunity.
■ High speed-1 MBit/s
■ Superior CMR-15kV/µs at VCM = 1500V (FODM453)
■ Performance guaranteed over temperature (0–70°C)
■ U.L. recognized (File # E90700)
■ VDE0884 recognized (File # 136480)
– Ordering option V, e.g., FODM452V
Applications
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
■ Wide bandwidth analog coupling
Package
Schematic
0.050 (1.27)
TYP
ANODE 1
SEATING PLANE
0.181 (4.60)
0.165 (4.20)
6 VCC
5 VO
Pin 1
CATHODE 3
4 GND
0.169 (4.30)
0.153 (3.90)
0.008 (0.2)
TYP
0.094 (2.40)
0.079 (2.00)
0.020 (0.50)
0.011 (0.30)
0.008 (0.20)
0 (0.00)
0.287 (7.30)
0.248 (6.30)
Lead Coplanarity : 0.004 (0.10) MAX
Note:
All dimensions are in inches (millimeters).
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
June 2007
Symbol
Value
Units
TSTG
Storage Temperature
Parameter
-40 to +125
°C
TOPR
Operating Temperature
-40 to +85
°C
EMITTER
IF (avg)
DC/Average Forward Input Current
25
mA
IF (pk)
Peak Forward Input Current (50% duty cycle, 1ms P.W.)
50
mA
Peak Transient Input Current (≤1µs P.W., 300pps)
1.0
A
IF (trans)
VR
Reverse Input Voltage
5
V
PD
Input Power Dissipation
(No derating required over specified operating temp range)
45
mW
Average Output Current
8
mA
DETECTOR
IO (avg)
IO (pk)
16
mA
VCC
Supply Voltage
Peak Output Current
-0.5 to 30
V
VO
Output Voltage
-0.5 to 20
V
PD
Output Power Dissipation
(No derating required over specified operating temp range)
100
mW
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
2
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Absolute Maximum Ratings (TA = 25°C unless otherwise noted)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max.
Unit
1.60
1.7
V
EMITTER
VF
Input Forward Voltage
IF = 16mA, TA = 25°C
IF = 16mA
BVR
∆VF /∆TA
1.8
Input Reverse Breakdown Voltage
IR = 10µA
Temperature Coefficient of
Forward Voltage
IF = 16mA
5.0
-1.8
V
Logic High Output Current
IF = 0mA, VO = VCC = 5.5V, TA =25°C
.001
IF = 0 mA, VO = VCC = 15V, TA =25°C
.001
mV/°C
DETECTOR
IOH
IF = 0mA, VO = VCC = 15V
0.5
µA
1
50
ICCL
Logic Low Supply Current
IF = 16mA, VO = Open, VCC = 15V
100
200
µA
ICCH
Logic high supply current
IF = 0 mA, VO = Open, VCC = 15V,
TA = 25°C
0.05
1
µA
IF = 0mA, VO = Open, VCC = 15V
2
Transfer Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.*
Max
Unit
50
%
IF = 16mA, IO = 3mA, VCC = 4.5V, TA =2 5°C
0.4
V
IF = 16mA, IO = 2.4mA, VCC = 4.5 V
0.5
COUPLED
CTR
VOL
Current Transfer Ratio(1)
Logic LOW Output
Voltage
IF = 16mA, VCC = 4.5V
TA = 25°C VOL=0.4V
20
VOL=0.5V
15
Switching Characteristics (VCC = 5V)
Symbol
TPHL
TPLH
|CMH|
|CML|
BW
Parameter
Test Conditions
Device
Min. Typ.* Max.
Unit
0.8
µs
1.0
µs
0.8
µs
1.0
µs
Propagation Delay
Time to Logic LOW
RL = 1.9kΩ, IF = 16mA, TA = 25°C
(Fig. 9)
0.40
Propagation Delay
Time to Logic HIGH
RL = 1.9kΩ, IF = 16mA, TA = 25°C(2) (Fig. 9)
0.35
Common Mode
Transient Immunity
at Logic HIGH
IF = 0mA, VCM = 10VP-P, RL = 1.9kΩ,
TA = 25°C(3) (Fig. 10)
FODM452
5
15
KV/µs
IF = 0mA, VCM = 1500VP-P, RL = 1.9kΩ
TA = 25°C(3) (Fig. 10)
FODM453
15
40
KV/µs
Common Mode
Transient Immunity
at Logic LOW
IF = 16mA, VCM = 10VP-P, RL = 1.9kΩ,
TA = 25°C(3) (Fig. 10)
FODM452
5
15
KV/µs
IF = 16mA, VCM = 1500VP-P, RL = 1.9kΩ,
TA = 25°C(3) (Fig. 10)
FODM453
15
40
KV/µs
Bandwidth
RL = 100Ω
3
MHz
RL = 1.9kΩ, IF = 16mA
RL = 1.9kΩ, IF = 16mA
(2)
(2)
(2)
(Fig. 9)
(Fig. 9)
Isolation Characteristics
Symbol
VISO
CI-O
Characteristics
Withstand Insulation Test Voltage
Capacitance (Input to Output)
Test Conditions
RH ≤ 50%, TA = 25°C, t = 1 min.
f = 1MHz
(4)
Min.
(4)
Typ.*
3750
Max.
Unit
VRMS
0.2
pF
*All Typicals at TA = 25°C
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
3
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Electrical Characteristics (TA = 0 to 70°C unless otherwise specified)
2. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm /dt on the
leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state
(i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm /dt
on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low
state (i.e., VO < 0.8V).
4. Device is considered a two terminal device: Pins 1, and 3 are shorted together and Pins 4, 5, and 6 are shorted
together.
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
4
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Notes:
1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
Fig. 1 Input Forward Current vs Forward Voltage
Fig. 2 Normalized Current Transfer Ratio vs. Input Current
NORMALIZED CURRENT TRANSFER RATIO
100
IF – FORWARD CURRENT (mA)
TA = 25°C
10
1
0.1
0.01
0.001
1.20
VO = 0.4V
VCC = 5V
TA = 25°C
Normalized to IF = 16mA
1.15
1.10
1.05
1.00
0.95
0.90
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1
10
VF – FORWARD CURRENT (mA)
I F – INPUT CURRENT (mA)
Fig. 4 Logic High Output Current
vs. Ambient Temperature
1.6
IOH – LOGIC HIGH OUTPUT CURRENT (nA)
NORMALIZED CURRENT TRANSFER RATIO
Fig. 3 Normalized Current Transfer Ratio
vs. Ambient Temperature
IF = 16mA
VO = 0.4V
VCC = 5V
Normalized to TA = 25°C
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
-40
-20
0
20
40
60
80
VO = VCC = 5V
IF = 0V
10
1
0.1
-40
100
-20
0
40
60
80
100
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 DC and Pulsed Transfer Characteristics
10
14
TA = 25°C
VCC = 5V
tP – PROPAGATION DELAY (µs)
TA = 25°C
VCC = 5V
12
IO - OUTPUT CURRENT (mA)
20
TA – TEMPERATURE (°C)
TA – AMBIENT TEMPERATURE
IF = 40mA
35mA
10
30mA
8
25mA
20mA
6
15mA
4
10mA
IF = 16mA
IF = 10mA
tPLH
1
tPHL
5mA
2
0
0
2
4
6
8
10
12
14
0.1
16
1
VO – OUTPUT VOLTAGE (V)
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
2
3
4
5
6
7
8
9 10
RL – LOAD RESISTANCE (kΩ)
www.fairchildsemi.com
5
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Typical Performance Curves
Fig. 8 Frequency Response
Fig. 7 Propagation Delay vs. Ambient Temperature
1400
5
tP – PROPAGATION DELAY (ns)
NORMALIZED RESPONSE (dB)
IF = 16mA
VCC = 5V
RL = 1.9kΩ
1200
1000
800
600
tPHL
400
tPLH
IF = 16mA
VCC = 5V
TA = 25°C
RL = 220Ω
0
RL = 100Ω
-5
RL = 470Ω
-10
RL = 1kΩ
200
-15
0.01
0
-40
-20
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE (°C)
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
0.1
1
10
f – FREQUENCY (MHz)
www.fairchildsemi.com
6
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Typical Performance Curves (Continued)
Noise
Shield
+
1
6
5
VCC
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
+5 V
RL
VO
VO
0.1 µF
3
I F Monitor
4
C L = 1.5 µF
GND
Rm
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 9 Switching Time Test Circuit
IF
Noise
Shield
+
1
6
A
5
B
VCC
+5 V
RL
VO
VO
0.1 µF
VFF
3
4
GND
-
VCM
+
-
Pulse Gen
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 10 Common Mode Immunity Test Circuit
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
7
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Footprint Drawing for PCB Layout
0.050 0.050 0.050
(1.27) (1.27) (1.27)
0.024 (0.61)
Device
‘A’
Device
‘B’
0.190
(4.83)
0.310
(7.87)
Pin 1
Pin 1
0.060
(1.52)
0.100
(2.54)
End Stacking Configuration
Dimensions in inches (mm)
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
Unutilized Solder Pad
www.fairchildsemi.com
8
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Ordering Information
Option
Order Entry Identifier
(example)
R1
FODM452R1
Tape and Reel (500 per reel)
R2
FODM452R2
Tape and Reel (2500 per reel)
Description
V
FODM452V
R1V
FODM452R1V
VDE0884
VDE0884, Tape and Reel (500 per reel)
R2V
FODM452R2V
VDE0884, Tape and Reel (2500 per reel)
Marking Information
1
V
3
M453
2
X YY M
6
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One digit year code, e.g., ‘7’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
9
8.0 ± 0.1
3.5 ± 0.2
2 ± 0.05
Ø1.5 MIN
4.0 ± 0.1
0.3 MAX
1.75 ± 0.10
5.5 ± 0.05
12.0 ± 0.3
8.3 ± 0.1
5.2 ± 0.2
6.4 ± 0.2
0.1 MAX
Ø1.5 + 0.1/-0
User Direction of Feed
Note:
All dimensions are in millimeters.
Reflow Profile
Package Surface Temperature T (°C)
(Heating)
to 30 s
230°C (peak temperature)
210°C
180°C
to 60 s
150 s
90 s
80 s
Time (s)
• Peak reflow temperature: 230°C (package surface temperature) for 30 seconds
• Time of temperature higher than 210°C: 60 seconds or less
• One time soldering reflow is recommended
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
10
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
Carrier Tape Specifications
®
ACEx
Build it Now™
CorePLUS™
CROSSVOLT ™
CTL™
Current Transfer Logic™
®
EcoSPARK
FACT Quiet Series™
®
FACT
®
FAST
FastvCore™
FPS™
®
FRFET
SM
Global Power Resource
Green FPS™
®
POWEREDGE
Power-SPM™
®
PowerTrench
Programmable Active Droop™
®
QFET
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
®
SPM
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
Motion-SPM™
®
OPTOLOGIC
®
OPTOPLANAR
PDP-SPM™
®
Power220
®
Power247
SuperSOT™-8
SyncFET™
®
The Power Franchise
™
TinyBoost™
TinyBuck™
®
TinyLogic
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
®
UHC
UniFET™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS
PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S
WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
2. A critical component in any component of a life support,
device, or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative or In Design
This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Definition
Preliminary
First Production
This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve
design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for
reference information only.
Rev. I29
©2003 Fairchild Semiconductor Corporation
FODM452, FODM453 Rev. 1.0.0
www.fairchildsemi.com
11
FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler
TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
Similar pages