Fairchild FQP22P10 100v p-channel mosfet Datasheet

TM
FQP22P10
100V P-Channel MOSFET
General Description
Features
These P-Channel enhancement mode power field effect
transistors are produced using Fairchild’s proprietary,
planar stripe, DMOS technology.
This advanced technology has been especially tailored to
minimize on-state resistance, provide superior switching
performance, and withstand high energy pulse in the
avalanche and commutation mode. These devices are well
suited for low voltage applications such as audio amplifier,
high efficiency switching DC/DC converters, and DC motor
control.
•
•
•
•
•
•
•
-22A, -100V, RDS(on) = 0.125Ω @VGS = -10 V
Low gate charge ( typical 40 nC)
Low Crss ( typical 160 pF)
Fast switching
100% avalanche tested
Improved dv/dt capability
175°C maximum junction temperature rating
D
G
TO-220
G DS
FQP Series
S
Absolute Maximum Ratings
Symbol
VDSS
ID
TC = 25°C unless otherwise noted
Parameter
Drain-Source Voltage
- Continuous (TC = 25°C)
Drain Current
- Continuous (TC = 100°C)
IDM
Drain Current
- Pulsed
(Note 1)
FQP22P10
-100
Units
V
-22
A
-15.6
A
-88
A
± 30
V
710
mJ
VGSS
Gate-Source Voltage
EAS
Single Pulsed Avalanche Energy
(Note 2)
IAR
Avalanche Current
(Note 1)
-22
A
EAR
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt
Power Dissipation (TC = 25°C)
(Note 1)
12.5
-6.0
125
0.83
-55 to +175
mJ
V/ns
W
W/°C
°C
300
°C
dv/dt
PD
TJ, TSTG
TL
(Note 3)
- Derate above 25°C
Operating and Storage Temperature Range
Maximum lead temperature for soldering purposes,
1/8" from case for 5 seconds
Thermal Characteristics
Symbol
RθJC
Parameter
Thermal Resistance, Junction-to-Case
Typ
--
RθCS
Thermal Resistance, Case-to-Sink
0.5
--
°C/W
RθJA
Thermal Resistance, Junction-to-Ambient
--
62.5
°C/W
©2002 Fairchild Semiconductor Corporation
Max
1.2
Units
°C/W
Rev. B, August 2002
FQP22P10
QFET
Symbol
TC = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Typ
Max
Units
-100
--
--
V
--
-0.1
--
V/°C
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = -250 µA
∆BVDSS
/ ∆TJ
Breakdown Voltage Temperature
Coefficient
ID = -250 µA, Referenced to 25°C
IDSS
IGSSF
IGSSR
VDS = -100 V, VGS = 0 V
--
--
-1
µA
VDS = -80 V, TC = 125°C
--
--
-10
µA
Gate-Body Leakage Current, Forward
VGS = -30 V, VDS = 0 V
--
--
-100
nA
Gate-Body Leakage Current, Reverse
VGS = 30 V, VDS = 0 V
--
--
100
nA
-2.0
--
-4.0
V
--
0.096
0.125
Ω
--
13.5
--
S
--
1170
1500
pF
--
460
600
pF
--
160
200
pF
ns
Zero Gate Voltage Drain Current
On Characteristics
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = -250 µA
RDS(on)
Static Drain-Source
On-Resistance
VGS = -10 V, ID = -11 A
gFS
Forward Transconductance
VDS = -40 V, ID = -11 A
(Note 4)
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
VDS = -25 V, VGS = 0 V,
f = 1.0 MHz
Switching Characteristics
td(on)
Turn-On Delay Time
tr
Turn-On Rise Time
td(off)
Turn-Off Delay Time
tf
Turn-Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDD = -50 V, ID = -22 A,
RG = 25 Ω
(Note 4, 5)
VDS = -80 V, ID = -22 A,
VGS = -10 V
(Note 4, 5)
--
17
45
--
170
350
ns
--
60
130
ns
--
110
230
ns
--
40
50
nC
--
7.0
--
nC
--
21
--
nC
A
Drain-Source Diode Characteristics and Maximum Ratings
IS
Maximum Continuous Drain-Source Diode Forward Current
--
--
-22
ISM
--
--
-88
A
VSD
Maximum Pulsed Drain-Source Diode Forward Current
VGS = 0 V, IS = -22 A
Drain-Source Diode Forward Voltage
--
--
-4.0
V
trr
Reverse Recovery Time
--
110
--
ns
Qrr
Reverse Recovery Charge
--
0.6
--
µC
VGS = 0 V, IS = -22 A,
dIF / dt = 100 A/µs
(Note 4)
Notes:
1. Repetitive Rating : Pulse width limited by maximum junction temperature
2. L = 2.2mH, IAS = -22A, VDD = -25V, RG = 25 Ω, Starting TJ = 25°C
3. ISD ≤ -22A, di/dt ≤ 300A/µs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test : Pulse width ≤ 300µs, Duty cycle ≤ 2%
5. Essentially independent of operating temperature
©2002 Fairchild Semiconductor Corporation
Rev. B, August 2002
FQP22P10
Electrical Characteristics
FQP22P10
Typical Characteristics
VGS
-15.0 V
-10.0 V
-8.0 V
-7.0 V
-6.0 V
-5.5 V
-5.0 V
Bottom : -4.5 V
1
10
-ID , Drain Current [A]
-ID, Drain Current [A]
Top :
1
10
175℃
25℃
0
10
-55℃
0
10
※ Notes :
1. VDS = -40V
2. 250μ s Pulse Test
※ Notes :
1. 250μ s Pulse Test
2. TC = 25℃
-1
-1
0
10
10
1
10
2
10
4
6
8
10
-VGS , Gate-Source Voltage [V]
-VDS, Drain-Source Voltage [V]
Figure 1. On-Region Characteristics
Figure 2. Transfer Characteristics
0.4
-I DR , Reverse Drain Current [A]
RDS(on) [ Ω ],
Drain-Source On-Resistance
0.5
VGS = - 10V
0.3
VGS = - 20V
0.2
0.1
1
10
0
10
175℃ 25℃
※ Notes :
1. VGS = 0V
2. 250μ s Pulse Test
※ Note : TJ = 25℃
0.0
-1
0
10
20
30
40
50
60
70
80
90
100
10
0.2
0.4
0.6
-ID , Drain Current [A]
1.6
1.8
2.0
2.2
2.4
2.6
VDS = -20V
10
Coss
※ Notes :
1. VGS = 0 V
2. f = 1 MHz
2000
Crss
1000
500
-V GS , Gate-Source Voltage [V]
VDS = -50V
2500
Capacitance [pF]
1.4
12
Ciss
1500
1.2
Figure 4. Body Diode Forward Voltage
Variation vs. Source Current
and Temperature
Ciss = Cgs + Cgd (Cds = shorted)
Coss = Cds + Cgd
Crss = Cgd
3000
1.0
-VSD , Source-Drain Voltage [V]
Figure 3. On-Resistance Variation vs.
Drain Current and Gate Voltage
3500
0.8
VDS = -80V
8
6
4
2
※ Note : ID = -22 A
0
0
-1
10
0
10
1
10
-VDS, Drain-Source Voltage [V]
Figure 5. Capacitance Characteristics
©2002 Fairchild Semiconductor Corporation
0
10
20
30
40
50
QG, Total Gate Charge [nC]
Figure 6. Gate Charge Characteristics
Rev. B, August 2002
(Continued)
2.5
1.2
2.0
1.1
RDS(ON) , (Normalized)
Drain-Source On-Resistance
-BV DSS , (Normalized)
Drain-Source Breakdown Voltage
FQP22P10
Typical Characteristics
1.0
※ Notes :
1. VGS = 0 V
2. ID = -250 μ A
0.9
0.8
-100
-50
0
50
100
150
1.5
1.0
※ Notes :
1. VGS = -10 V
2. ID = -11 A
0.5
0.0
-100
200
-50
0
50
100
150
200
o
o
TJ, Junction Temperature [ C]
TJ, Junction Temperature [ C]
Figure 7. Breakdown Voltage Variation
vs. Temperature
Figure 8. On-Resistance Variation
vs. Temperature
25
Operation in This Area
is Limited by R DS(on)
2
10
20
1 ms
-I D, Drain Current [A]
-I D, Drain Current [A]
100 µs
10 ms
1
10
DC
0
10
※ Notes :
15
10
5
o
1. TC = 25 C
o
2. TJ = 175 C
3. Single Pulse
-1
10
0
1
10
0
25
2
10
10
50
100
125
150
175
Figure 10. Maximum Drain Current
vs. Case Temperature
0
D = 0 .5
※ N o te s :
1 . Z θ J C ( t) = 1 .2 ℃ /W M a x .
2 . D u ty F a c to r , D = t 1 /t 2
3 . T J M - T C = P D M * Z θ J C ( t)
0 .2
0 .1
10
-1
0 .0 5
PDM
0 .0 2
0 .0 1
θ JC
( t) , T h e r m a l R e s p o n s e
Figure 9. Maximum Safe Operating Area
10
75
TC, Case Temperature [℃]
-VDS, Drain-Source Voltage [V]
t1
Z
s i n g l e p u ls e
10
t2
-2
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t 1 , S q u a r e W a v e P u ls e D u r a t io n [ s e c ]
Figure 11. Transient Thermal Response Curve
©2002 Fairchild Semiconductor Corporation
Rev. B, August 2002
FQP22P10
Gate Charge Test Circuit & Waveform
VGS
Same Type
as DUT
50KΩ
Qg
200nF
12V
-10V
300nF
VDS
VGS
Qgs
Qgd
DUT
-3mA
Charge
Resistive Switching Test Circuit & Waveforms
VDS
RL
t on
VDD
VGS
RG
td(on)
VGS
t off
tr
td(off)
tf
10%
DUT
-10V
VDS
90%
Unclamped Inductive Switching Test Circuit & Waveforms
BVDSS
1
EAS = ---- L IAS2 -------------------2
BVDSS - VDD
L
VDS
tp
ID
RG
VDD
DUT
-10V
tp
©2002 Fairchild Semiconductor Corporation
VDD
Time
VDS (t)
ID (t)
IAS
BVDSS
Rev. B, August 2002
FQP22P10
Peak Diode Recovery dv/dt Test Circuit & Waveforms
+
VDS
DUT
_
I SD
L
Driver
RG
VGS
VGS
( Driver )
I SD
( DUT )
Compliment of DUT
(N-Channel)
VDD
• dv/dt controlled by RG
• ISD controlled by pulse period
Gate Pulse Width
D = -------------------------Gate Pulse Period
10V
Body Diode Reverse Current
IRM
di/dt
IFM , Body Diode Forward Current
VDS
( DUT )
VSD
Body Diode
Forward Voltage Drop
VDD
Body Diode Recovery dv/dt
©2002 Fairchild Semiconductor Corporation
Rev. B, August 2002
FQP22P10
Package Dimensions
TO-220
4.50 ±0.20
2.80 ±0.10
(3.00)
+0.10
1.30 –0.05
18.95MAX.
(3.70)
ø3.60 ±0.10
15.90 ±0.20
1.30 ±0.10
(8.70)
(1.46)
9.20 ±0.20
(1.70)
9.90 ±0.20
1.52 ±0.10
0.80 ±0.10
2.54TYP
[2.54 ±0.20]
10.08 ±0.30
(1.00)
13.08 ±0.20
)
(45°
1.27 ±0.10
+0.10
0.50 –0.05
2.40 ±0.20
2.54TYP
[2.54 ±0.20]
10.00 ±0.20
Dimensions in Millimeters
©2002 Fairchild Semiconductor Corporation
Rev. B, August 2002
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
FACT™
ActiveArray™
FACT Quiet series™
Bottomless™
FAST®
CoolFET™
FASTr™
CROSSVOLT™ FRFET™
DOME™
GlobalOptoisolator™
EcoSPARK™
GTO™
E2CMOS™
HiSeC™
EnSigna™
I2C™
Across the board. Around the world.™
The Power Franchise™
Programmable Active Droop™
ImpliedDisconnect™
ISOPLANAR™
LittleFET™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench®
QFET™
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
TruTranslation™
UHC™
UltraFET®
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body,
device or system whose failure to perform can be
or (b) support or sustain life, or (c) whose failure to perform
reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use
device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
©2002 Fairchild Semiconductor Corporation
Rev. I1
Similar pages