Frontier FR30-04G 3a fast recovery glass passivated rectifier Datasheet

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998
FAX: (805) 522-9989
E-mail: [email protected]
Web: http://www.frontierusa.com
3A FAST RECOVERY GLASS PASSIVATED RECTIFIER
FR30-005G THRU FR30-10G
FEATURES
z FAST RECOVERY TIMES
z UL 94V-0 FLAME RETARDANT EPOXY MOLDING COMPOUND
z GLASS PASSIVATED CHIP JUNCTION
z LOW COST
z HIGH SURGE CURRENT CAPABILITY
1.0(25.4)
MIN
.052(1.3)
.048(1.2)
.375(9.5)
.335(8.5)
.220(5.6)
.197(5.0)
MECHANICAL DATA
z CASE: TRANSFER MOLDED, DO201AD, DIMENSIONS
IN INCHES AND (MILLIMETERS)
z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208
z POLARITY: CATHODE INDICATED BY COLOR BAND
z WEIGHT: 1.2 GRAMS
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
FR30
FR30
FR30
FR30
FR30
FR30
FR30
UNITS
RATINGS
SYMBOL
-005G
-01G
-02G
-04G
-06G
-08G
-10G
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
VRRM
50
100
200
400
600
800
1000
V
MAXIMUM RMS VOLTAGE
VRMS
35
70
140
280
420
560
700
V
MAXIMUM DC BLOCKING VOLTAGE
VDC
50
100
200
400
600
800
1000
V
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
IO
3.0
A
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
IFSM
150
A
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
CJ
28
PF
TYPICAL THERMAL RESISTANCE (NOTE 2)
Rθjc
30
℃/W
STORAGE TEMPERATURE RANGE
TSTG
-55 TO + 150
℃
OPERATING TEMPERATURE RANGE
TOP
-55 TO + 150
℃
ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED)
FR30
CHARACTERISTICS
SYMBOL
-005G
MAXIMUM FORWARD VOLTAGE AT IO DC
VF
FR30
-01G
FR30
-02G
FR30
-04G
1.3
FR30
-06G
FR30
-08G
FR30
-10G
UNITS
V
MAXIMUM REVERSE CURRENT AT 25℃
IR
5
μA
MAXIMUM REVERSE CURRENT AT100℃
IR
50
μA
MAXIMUM REVERSE RECOVERY TIME (NOTE 3)
TRR
150
NOTE:
1. MEASURED AT 1 MHZ AND APPLIED REVERSE VOLTAGE 0F 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
3. REVERSE RECOVERY TEST CONDITIONS: IF=0.5A, IR=1.0A, IRR=0.25A
FR30-005G THRU FR30-10G
250
Page: 1
500
nS
RATINGS AND CHARACTERISTIC CURVE FR30-005G THRU FR30-10G
FIG. 1-TEST CIRCUIT DIAGRAM AND REVERSE
RECOVERY TIME CHARACTERISTIC
50Ω
NO INDUCTIVE
10Ω
NO INDUCTIVE
Trr
+0.5A
(-)
D.U.T.
(+)
25 Vdc
(approx)
(-)
PULSE
GENERATOR
( NOTE 2 )
0
-0.25A
1Ω
NON
INDUCTIVE
OSCILLOSCOPE
( NOTE 1 )
(+)
-1.0A
NOTE: 1. RISE TIME=7ns MAX. INPUT
IMPEDANCE=1 MOhms 22PF
2. RISE TIME =10ns MAX. SOURCE
IMPEDANCE=50OHMS
1cm
SET TIME BASE
FOR 10/20 ns/cm
Fig. 3-MAXIMUM FORWARD SURGE
CURRENT
3.0
SINGLE PHASE HALF
WAVE 60Hz
RESISTIVE OR
INDUCTIVE LOAD
2.0
1.0
0
0
20 40
PEAK FORWARD SURGE CURRENT
AMPERES
Io-AVERAGE RECTIFIED
CURRENT (A)
Fig. 2-MAXIMUM FORWARD CURRENT
DERATING CURVE
200
8.3ms Single Half Sine-Wave
(JEDEC Method)
100
50
10
60 80 100 120 140 160 180 200
TA-AMBIENT TEMPERATURE (OC)
1
10
NUMBER OF CYCLES AT 60HZ
FIG. 5-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
10
Tj=100oC
1.0
Tj=50oC
0.1
o
Tj=25 C
0.01
0
20
40
60 80 100 120 140
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
FR30-005G THRU FR30-10G
INSTANTANEOUS FORWARD CURRENT
AMPERES
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
FIG. 4-TYPICAL REVERSE CHARACTERISTICS
100
10
1.0
0.1
Tj=25oC
PULSE WIDTH =300us
1% DUTY CYCLE
0.01
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
Page: 2
100
Similar pages