MOSPEC FRF1630 Thru FRF1660 Switchmode Full Plastic Dual Fast Recovery Power Rectifiers FAST RECOVERY RECTIFIERS Designed for use in switching power supplies. inverters and as free wheeling diodes. These state-of-the-art devices have the following features: 16 AMPERES 30-600 VOLTS ＊Glass Passivated chip junctions ＊Low Reverse Leakage Current ＊Fast Switching for High Efficiency ＊150℃ Operating Junction Temperature ＊Low Forward Voltage , High Current Capability ＊Plastic Material used Carries Underwriters Laboratory Flammability Classification 94V-O Plating pb free is indicated by box ITO-220AB MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=125℃ Per Total Device Peak Repetitive Forward Current (Rate VR, Square Wave, 20kHz,TC=125℃) Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Operating and Storage Junction Temperature Range FRF16 Symbol Unit 30 40 50 60 VRRM VRWM VR 300 400 500 600 V VR(RMS) 210 280 350 420 V IF(AV) 8.0 16 A DIM IFM 16 A 150 A -65 to +150 ℃ IFSM TJ , Tstg ELECTRIAL CHARACTERISTICS Characteristic FRF16 Symbol 30 40 Unit 50 60 Maximum Instantaneous Forward Voltage ( IF =8.0 Amp TC = 25℃) VF 1.3 V Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) IR 10 200 uA Reverse Recovery Time ( IF = 0.5 A, IR =1.0 , Irr =0.25 A ) Trr 250 ns Typical Junction Capacitance (Reverse Voltage of 4 volts & f=1 MHz) CP 90 PF A B C D E F G H I J K L M N P O Q MILLIMETERS MIN MAX 15.05 15.15 13.35 13.45 10.00 10.10 6.55 6.65 2.65 2.75 1.55 1.65 1.15 1.25 0.55 0.65 2.50 2.60 3.00 3.20 1.10 1.20 0.55 0.65 4.40 4.60 1.15 1.25 2.65 2.75 3.35 3.45 3.15 3.25 FRF1630 Thru FRF1660 FIG-3 FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 TYPICAL FORWARD CHARACTERISITICS LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT (uA.) FIG-2 TYPICAL REVERSE CHARACTERISTICS JUNCTION CAPACITANCE (PF) FORWARD VOLTAGE (Volts) REVERSE VOLTAGE (Volts.) PERCENT OF PEAK REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) FIG-5PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 Hz Set time base for 50/100 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram