Fairchild FSA2156 Low-voltage spst 0.4î© analog switch Datasheet

FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Features
Description
ƒ Maximum 0.7Ω On Resistance (RON) for +2.7V
The FSA2156 is a high-performance Single-Pole
Single-Throw (SPST) analog switch that features ultra
low RON of 0.4Ω (typ.) at 2.7V VCC. The FSA2156
operates over the wide VCC range of 1.65V to 4.3V and
is fabricated with sub-micron CMOS technology to
achieve fast switching speeds. The select input is TTLlevel compatible.
Supply
ƒ 0.25Ω Maximum RON Flatness for +2.7V Supply
ƒ Space-Saving MicroPak™ and SC70 Packaging
ƒ Broad VCC Operating Range: 1.65 to 4.3V
ƒ Fast Turn-on and Turn-off Times
ƒ Over-Voltage Tolerant TTL-Compatible Control Input
ƒ Suitable for 2 UL USB2.0 Applications (200mA)
ƒ Low ICCT Current Over Expanded Control Input Range
FSA2156 features very low quiescent current even
when the control voltage is lower than the VCC supply.
This feature facilitates longer battery life in mobile
handset applications and allows for the direct interface
with baseband-processor, general-purpose I/Os.
Ordering Information
Part Number
Top Mark Pb-Free
Package Description
Packing Method
FSA2156P6
2156
6-lead SC70, EIAJ SC88, 1.25mm Wide
250 Units on Tape and Reel
FSA2156P6X
2156
6-lead SC70, EIAJ SC88, 1.25mm Wide
3000 Units on Tape and Reel
FSA2156L6X
FY
6-lead MicroPak™, 1.0mm Wide
5000 Units on Tape and Reel
Pb-free package per JEDEC J-STD-020B.
Analog Symbol
Figure 1.
A 1
6
VCC
VCC 1
6
A
GND 2
5
NC
NC 2
5
B
B 3
4
Sel
Sel 3
4 GND
SC70 Pin Assignments (Top View)
Figure 2.
MicroPak™ Pin Assignments (Top View)
Truth Table
Pin Descriptions
Control Input (S)
Function
Name
Function
L (LOW Logic Level)
H (HIGH Logic Level)
Switch Open (OFF)
Switch Closed (ON)
A, B
Sel
Switch I/O Data Ports
Control Input
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
www.fairchildsemi.com
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
August 2007
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
VCC
VSW
VCNTRL
Parameter
Supply Voltage
Switch I/O Voltage
(1)
Control Input Voltage
(1)
Min.
Max.
Unit
-0.5
4.6
V
-0.5
VCC + 0.3
V
-0.5
4.6
V
± 50
± 50
mA
IIK
Input Clamp Diode Current
ISW
Switch I/O Current (Continuous)
500
mA
Pulsed at 1ms Duration, <10% Duty Cycle
500
mA
180
mW
180
mW
ISWPEAK
PD
TSTG
SC70 Package
Power Dissipation at 85ºC
MicroPak™ Package
Storage Temperature Range
-65
+150
°C
TJ
Maximum Junction Temperature
+150
°C
TL
Lead Temperature (Soldering, 10 seconds)
+260
°C
2
kV
All Pins
ESD
Human Body Model
I/O to GND
8
kV
Charge Discharge Model
2
kV
Note:
1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Symbol
VCC
VCNTRL
Parameter
Min.
Max.
Unit
1.65
4.3
V
0
VCC
V
0
VCC
V
350
mA
85
ºC
SC70 6L package
350
°C/W
MicroPak™ 6L package
310
°C/W
Supply Voltage
Control Input Voltage
(2)
VSW
Switch I/O Voltage
ISW
Switch I/O Load Current
TA
Operating Temperature
θJA
Thermal Resistance (free air)
-40
Note:
2. Control input must be held HIGH or LOW; it must not float.
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
www.fairchildsemi.com
2
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Absolute Maximum Ratings
All typical values are at 25°C unless otherwise specified.
Symbol
Parameter
Conditions
Min.
VIH
VIL
TA = -40 to
+85ºC
TA = +25ºC
VCC (V)
Typ.
Max.
Min.
3.6 - 4.3
1.4
2.7 - 3.6
1.3
2.3 - 2.7
1.1
1.65 - 1.95
0.9
Input Voltage High
Input Voltage Low
Max.
V
3.6 - 4.3
0.7
2.7 - 3.6
0.5
2.3 - 2.7
0.4
1.65 - 1.95
0.4
Control Input
Leakage
VCNTRL = 0 to VCC
1.65 - 4.3
INO(0FF)
Off Leakage Current
of Port B
VA = 0.3V, VCC – 0.3V, VB =
0.3V, VCC – 0.3V or Floating
Figure 4
1.95 - 4.3
-10
IA(ON)
On Leakage Current
of Port A
VA = 0.3V, VCC – 0.3V,
VB = Floating
Figure 5
1.95 - 4.3
-20
Power Off Leakage
Current
Port A VA = 0.3V, 4.3V, VCC =
0V, VB = 0V
0V
Power Off Leakage
Current(3)
Port A VA = 0.3V, 4.3V, VCC =
0V, VB = Floating
0V
ION = 100mA, VB = 0V, 0.7V,
3.6V and 4.3V
4.3
0.36
0.60
Switch On
Resistance(4)
ION = 100mA, VB = 0V, 0.7V,
2.0V and 2.7V
2.7
0.4
0.7
Figure 3
ION = 100mA, VB = 0V, 0.7V,
1.6V and 2.3V
2.3
0.55
0.80
ION = 100mA, VB = 0.7V
1.65
1.5
ION = 100mA, VB = 0V, 0.7V,
3.6V and 4.3V
4.3
0.25
ION = 100mA, VB = 0V, 0.7V,
2.0V and 2.7V
2.7
0.25
ION = 100mA, B = 0V, 0.7V,
1.6V and 2.3V
2.3
0.3
ION = 100mA, VB = 0V, 0.7V,
0.9V and 1.65V
1.65
VSW = 0 or VCC, IOUT = 0
4.3
IIN
I0FF
RON
RFLAT(ON)
On Resistance
Flatness(5)
Figure 3
ICC
Quiescent Supply
Current
ICCT
Increase in Icc per
Input
-4
Units
V
V
-0.5
0.5
µA
10
-50
50
nA
20
-100
100
nA
±25
µA
35
nA
+4
-35
Ω
Ω
VCNTRL = 2.6V
4.3
VCNTRL = 1.8V
0.9
-100
30
100
3
7
-500
500
6.0
12
15.0
nA
µA
Notes:
3. Guaranteed by characterization; not production tested.
4. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch.
5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the
specified range of conditions.
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
www.fairchildsemi.com
3
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
DC Electrical Characteristics
All typical values are at 25°C unless otherwise specified.
Symbol
Parameter
Conditions
Min. Typ.
tON
VB = 1.5V,
Turn-On Time RL = 50Ω, CL =
35pF
tOFF
Max.
Min.
Units
Figure
ns
Figure 6
Figure 7
ns
Figure 6
Figure 7
pC
Figure 10
Max.
3.6 - 4.3
55
60
2.7 - 3.6
60
65
2.3 - 2.7
65
70
3.6 - 4.3
65
70
2.7 - 3.6
70
75
2.3 - 2.7
75
80
1.65 - 1.95
VB = 1.5V,
Turn-Off Time RL = 50Ω, CL =
35pF
TA = -40ºC
to +85ºC
TA = +25ºC
VCC (V)
40
1.65 - 1.95
90
2.3 - 4.3
6
1.65 - 1.95
1.3
Charge
Injection
CL = 1.0nF, VS =
0V ,
RS = 0Ω
Off Isolation
f = 100kHz
RT = 50Ω
1.65 - 4.3
-65
dB
Figure 9
BW
-3db
Bandwidth
RT = 50Ω
CL = 0pF
1.65 - 4.3
80
MHz
Figure 8
THD
Total
Harmonic
Distortion
RT = 600Ω, VSW =
0.5VPP,
f = 20Hz to 20kHz
1.65 - 4.3
.02
%
Q
OIRR
Capacitance
Symbol
CIN
COFF
CON
Parameter
Control Pin Input
Capacitance
B-Port Off
Capacitance
A-Port On
Capacitance
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
Conditions
VCC (V)
TA = +25ºC
Min.
Typ.
Max.
Units
Figures
f = 1MHz
0
1.5
pF
Figure 11
f = 1MHz
4.3
38
pF
Figure 11
f = 1MHz
4.3
115
pF
Figure 12
www.fairchildsemi.com
4
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
AC Electrical Characteristics
VON
Floating, 0.3V
or Vcc-0.3V
FSA2156
B
FSA2156
B
IA(OFF)
A
A
A
VSW
VSW
ION
GND
VCNTRL
GND
VCNTRL
GND
RON = VON / ION
Figure 3.
On Resistance
Figure 4.
Off Leakage
FSA2156
B
Floating
B
FSA2156
A
GND
A
VSW
VCNTRL
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
RL
VOUT
VCNTRL
On Leakage
Figure 7.
CL
RS
GND
GND
GND
Figure 5.
A
VSW
IA(ON)
RL and CL are functions of the application
environment (see AC/DC tables for values).
CL includes test fixture and stray capacitance.
Figure 6.
Test Circuit Load
Turn-On / Turn-Off Waveforms
www.fairchildsemi.com
5
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Test Diagrams
Network Ana lyzer
Network Analyzer
FSA 215 6
RS
RS
FSA2156
GND
VIN
RT
VS
VS
GND
GND
VCNTRL
GND
V IN
V CNTRL
GND
GND
GND
RT
GND
GND
V OUT
VOUT
CL
RT
GND
R S and R T are fun ction s of the app lication en viron men t
(see AC/DC tab les for value s). Off is olation = 20 Log (V OUT/V IN).
GND
RT and CL are functions of the application environment (see AC/DC tables
for values). CL includes test fixtures and stray capacitance.
Figure 8.
Bandwidth
Generator
B
RS
VS
Figure 9.
FSA2156
VSW
VCC
Input – VCNTRL Off
A
VOUT
CL
GND
nSn
Channel Off Isolation
On
Off
0V
DVOUT
GND
VOUT
VCNTRL
GND
CL includes test fixture and stray capacitance
Figure 10.
B
F=1MHz
Figure 11.
Charge Injection Test
FSA2156
Capacitance
Meter
Capacitance
Meter
VCNTRL
B
FSA2156
VCNTRL
F=1MHz
A
A
Channel Off Capacitance
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
Q = DVOUT / CL
Figure 12.
Channel On Capacitance
www.fairchildsemi.com
6
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Test Diagrams (Continued)
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Physical Dimensions
Dimensions are in millimeters unless otherwise noted.
Figure 13.
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
6-Lead, SC70 Package
www.fairchildsemi.com
7
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Physical Dimensions (Continued)
Dimensions are in inches (millimeters) unless otherwise noted.
Figure 14.
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
6-Lead, MicroPak™ Package
www.fairchildsemi.com
8
Tape Format for SC70
Package
Designator
Tape Section
Number Cavities
Cavity Status
Cover Tape
Status
Leader (Start End)
125 (typical)
Empty
Sealed
Carrier
3000
Filled
Sealed
Trailer (Hub End)
75 (typical)
Empty
Sealed
P6X
Tape Dimensions
Dimensions are in inches (millimeters).
Tape Size
(8mm)
DIM A
DIM B
DIM F
DIM Ko
DIMP1
DIM W
0.093
0.096
0.138 ± 0.004
0.053 ± 0.004
0.157
0.315 ± 0.004
(2.35)
(2.45)
(3.50 ± 0.10)
(1.35 ± 0.10)
(4.00)
(8.00 ± 0.1)
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
www.fairchildsemi.com
9
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Tape and Reel Specification
Package Designator
Tape Section
Number
Cavities
Cavity
Status
Leader (Start End)
125 (typical)
Empty
Sealed
Carrier
5000
Filled
Sealed
Trailer (Hub End)
75 (typical)
Empty
Sealed
L6X
Cover Tape
Status
Tape Dimensions
Dimensions are in inches (millimeters).
Reel Dimensions
Dimensions are in inches (millimeters).
Tape
Size
A
B
C
7.000
0.059
0.512
(8mm)
(177.80)
(1.50)
(13.00)
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
D
N
W1
W2
W23
0.795
2.165
(20.20)
(55.00)
.0331 +0.059 / -0.000
0.567
W1 +0.078 / -0.039
(8.40 +1.50 / -0.00)
(14.40)
(W1 +2.00 / -1.00)
www.fairchildsemi.com
10
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
Tape Format for MicroPak™
FSA2156 — Low-Voltage SPST 0.4Ω Analog Switch
© 2006 Fairchild Semiconductor Corporation
FSA2156 Rev. 1.0.3
www.fairchildsemi.com
11
Similar pages