Fairchild FSAV330MTCX 4-channel, 2:1 video switch Datasheet

FSAV330 — 4-Channel, 2:1 Video Switch
Features
Description
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
The FSAV330 video switch is a quad, single-pole /
double-throw, high-speed CMOS TTL-compatible video
switch. The low on resistance of the switch allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
Replacement for the P15V330
Wide Bandwidth: 300MHz
4Ω Switch Connection between Two Ports
Minimal Propagation Delay through the Switch
Low lCC
When /OE is LOW, the select pin connects the A port to
the selected B port output. When /OE is HIGH, the
switch is OPEN and a high-impedance state exists
between the two ports.
Zero Bounce in Flow-through Mode
Control Inputs Compatible with TTL Level
Applications
ƒ
ƒ
ƒ
ƒ
Set-top Boxes
Flat Panel Displays
CRT Displays
DVD - RW
Ordering Information
Operating
Temperature Range
Package
Packing
Method
FSAV330M
-40 to +85°C
16-Lead, Small Outline Integrated Circuit (SOIC),
JEDEC MS-012, 0.150 inch Narrow
Tube
FSAV330MX
-40 to +85°C
16-Lead, Small Outline Integrated Circuit (SOIC),
JEDEC MS-012, 0.150 inch Narrow
Tape and Reel
FSAV330MTC
-40 to +85°C
16-Lead, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
FSAV330MTCX
-40 to +85°C
16-, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
FSAV330QSC
-40 to +85°C
16-Lead, Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150 inch Wide
Tube
FSAV330QSCX
-40 to +85°C
16-Lead, Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150 inch Wide
Tape and Reel
Part Number
Tube
Tape and Reel
All packages are lead free per JEDEC: J-STD-020B standard.
The Fairchild switch family derives from and embodies Fairchild’s proven switch technology used for several years in its
74LVX3L384 (FST3384) bus switch product.
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
FAV330 — 4-Channel, 2:1 Video Switch
March 2008
Figure 1. Logic Diagram
S
1
16
VCC
1B1
2
15
/OE
1B2
3
14
4B1
1A
4
13
4B2
2B1
5
12
4A
2B2
6
11
3B1
2A
7
10
3B2
GND
8
9
3A
FSAV330 — 4-Channel, 2:1 Video Switch
Pin Configurations
Figure 2. Pin Assignments
Pin Descriptions
Pin #
Pin Types
Description
15
/OE
Bus Switch Enabled
1
S
Select Input
4,7,9,12
A
Bus A
2,3,5,6,10,11,13,14
B1-B2
Bus B
8
GND
Ground
16
VCC
Supply Voltage
Truth Table
S
/OE
Function
Don’t Care
HIGH
Disconnected
LOW
LOW
A=B1
HIGH
LOW
A=B2
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
VCC
Supply Voltage
Min.
Max.
Unit
-0.5
+7.0
V
VS
DC Switch Voltage
-0.5
+7.0
V
VIN
DC Input Voltage
(1)
-0.5
+7.0
V
IIK
DC Input Diode Current
IOUT
DC Output Sink Current
128
mA
DC VCC / GND Current
±100
mA
+150
°C
4000
V
ICC/IGND
-50
TSTG
Storage Temperature Range
ESD
Human Body Model, JESD22-A114
-65
mA
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
FSAV330 — 4-Channel, 2:1 Video Switch
Absolute Maximum Ratings
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
Max.
Unit
VCC
Power Supply
4.0
5.5
V
VIN
Input Voltage
0
5.5
V
VOUT
Output Voltage
0
5.5
V
tr , tf
Input Rise and Fall Time
Switch Control Input
0
5
Switch I/O
0
DC
TA
Operating Temperature, Free Air
-40
+85
ns/V
°C
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
3
Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C.
Symbol
VANALOG
VIK
VIH
VIL
II
IOZ
Parameter
Conditions
Analog Signal Range
Clamp Diode Voltage
High-Level Input Voltage
Low-Level Input Voltage
Input Leakage Current
Off-state Leakage Current
(3)
RON
Switch On Resistance
ICC
Quiescent Supply Current
ΔICC
Increase in ICC per Input
IIN=-18mA
0 ≤ VIN ≤ 5.5V
0 ≤ A, B ≤ VCC
VIN=1.0V, RI=75Ω, ION=13mA
VIN=2.0V, RI=75Ω, ION=26mA
VIN=VCC or GND, IOUT=0
One Input at 3.4V
Other Inputs at VCC or GND
VCC (V)
Min.
5
4.5
4.0 to 5.5
4.0 to 5.5
5.5
5.5
4.5
4.5
5.5
0
Typ.
Max.
Units
2
-1.2
V
V
V
V
µA
µA
2.0
0.8
±1.0
±1.0
7
10
3
3
7
5.5
Ω
µA
2.5
mA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
FSAV330 — 4-Channel, 2:1 Video Switch
DC Electrical Characteristics
AC Electrical Characteristics
TA=-40 to +85°C, CL=50pF, RU=RD=500Ω.
Symbol
tPZH, tPZL
tPHZ, tPLZ
BW
Parameter
Output Enable
Time, Select to
Bus B
Output Enable
Time, /OE to Bus
A, B
Output Disable
Time, Select to
Bus B
Output Disable
Time, Output
Enable Time /OE
to Bus A, B
-3dB Bandwidth
XTALK
Conditions
(4)
Crosstalk
DG
Differential Gain
DP
Differential Phase
OIRR
Off Isolation
VCC=4.5 – 5.5V
Min. Typ.
Max.
VCC=4.0V
Min. Max.
5.2
5.1
5.6
5.2
5.5
VI=7V for tPLZ
VI=Open for tPHZ
RL=150Ω, TA=25°C
Figure
ns
Figure 3
Figure 4
ns
Figure 3
Figure 4
5.7
VI=7V for tPZL
VI=Open for tPZH
5.5
Units
5.5
300
MHz
RIN=10Ω,
RL=150Ω, f=10MHz
RL=150Ω,
f=3.58MHz
RL=150Ω,
f=3.58MHz
-58
dB
0.64
%
0.1
°
RL=150Ω, f=10MHz
-60
dB
Note:
4. This parameter is guaranteed by device characterization, not production tested.
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, not production tested.
Symbol
CI/O
CIN
A Port
B Port
CON
Parameter
Conditions
Control Pin Input Capacitance
VCC=5.0V
Input / Output Capacitance
VCC, /OE=5.0V
Switch On Capacitance
VCC=5.0V, /OE=0V
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
Typ.
Units
3
7
pF
5
12
pF
pF
www.fairchildsemi.com
4
FSAV330 — 4-Channel, 2:1 Video Switch
AC Loadings and Waveforms
Notes: Input drive by 50Ω source terminated in 50Ω.
CL includes load and stray capacitance.
Input PRR=1.0MHz, tW =500ns.
Figure 3. Figure Caption
Figure 4. AC Waveforms
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
5
10.00
9.80
A
8.89
16
9
B
4.00
3.80
6.00
PIN ONE
INDICATOR
1.75
1
5.6
8
0.51
0.35
1.27
(0.30)
0.25
M
1.27
C B A
0.65
LAND PATTERN RECOMMENDATION
1.75 MAX
1.50
1.25
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
SEE DETAIL A
0.25
0.10
C
0.25
0.19
0.10 C
0.50
0.25 X 45°
NOTES: UNLESS OTHERWISE SPECIFIED
(R0.10)
GAGE PLANE
(R0.10)
8°
0°
0.36
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AC, ISSUE C.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD
FLASH AND TIE BAR PROTRUSIONS
D) CONFORMS TO ASME Y14.5M-1994
E) LANDPATTERN STANDARD: SOIC127P600X175-16AM
F) DRAWING FILE NAME: M16AREV12.
SEATING PLANE
0.90
0.50
(1.04)
DETAIL A
SCALE: 2:1
Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
6
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
LAND PATTERN
RECOMMENDATION
TOP VIEW
END VIEW
SIDE VIEW
DETAIL A
Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
7
5.00±0.10
4.55
5.90
4.45 7.35
0.65
4.4±0.1
1.45
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
5.00
0.11
12°
MTC16rev4
Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
8
FSAV330 — 4-Channel, 2:1 Video Switch
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.3
www.fairchildsemi.com
9
Similar pages